Cheap Cordless Angle Grinder (2026): 5 Picks Scored for Shop and Metal Fabrication
Five angle grinders compared for budget cordless metal cutting, scored on motor speed, disc diameter, weight, included batteries and written warranty terms.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Overall Bare ToolDEWALT DCG408B9.5/10View on Amazon - 2
Best Complete KitTEENO 21V 3-Inch9.5/10View on Amazon - 3
Budget Pick 4-1/2 InchRYOBI PCL445B9.4/10View on Amazon - 4
Best Corded AlternativeWEN 9449.3/10View on Amazon
Finding the right cheap cordless angle grinder means balancing cutting speed, disc size, battery runtime, and tool weight without spending on features your shop does not need. For light metal cleanup, weld prep, and small cutting jobs, compact battery-powered grinders offer portability that corded tools cannot match. We compared five budget grinders across Amazon listings, evaluating rotational speeds from 9,000 RPM to 19,500 RPM, disc sizes of 3 inches and 4-1/2 inches, bare tools versus complete battery kits, and written manufacturer warranties.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Bare Tool DEWALT DCG408B: Brushless motor delivering up to 850 MWO and 9,000 RPM, Kickback Brake and E-Clutch safety features, and a 3.55 lb bare tool weight. Check price on Amazon
- Best Complete Kit TEENO 21V 3-Inch: Two 21V 2.0Ah batteries, smart LCD battery percentage display, 19,500 RPM motor, 6 discs, two guards, and a hard case in the box. Check price on Amazon
- Budget Pick 4-1/2 Inch RYOBI PCL445B: A full 4-1/2 inch grinder running at 9,000 RPM with a 3-position side handle, die cast gear case, and a stated 30 day warranty. Check price on Amazon
- Best Corded Alternative WEN 944: Continuous corded power from a 7-amp motor producing 11,000 RPM, with arbor adapter for 5/8 and 7/8-inch wheels. Check price on Amazon
The machines

DEWALT 20V MAX Cordless 4 1/2 Inch Paddle-Switch
A 20V MAX cordless 4-1/2 inch grinder with a brushless motor delivering up to 850 MWO and 9,000 RPM.
Pros
- Brushless motor rated up to 850 MWO and 9,000 RPM no load speed
- Equipped with Kickback Brake and E-Clutch anti-rotation features
- Lightweight design at 3.55 lb for the bare tool
- Listing states runtime of up to 56 cuts of 1/2 inch rebar
Cons
- Bare tool only with battery and charger sold separately
- No warranty term stated in the listing
- No CSA, UL or ETL certification stated in the listing

TEENO Cordless Angle Grinder 3"
A compact 21V cordless mini cut-off tool kit with two 2.0Ah batteries, LCD charge display, 19,500 RPM motor, and 6 discs.
Pros
- Complete kit includes two 2.0Ah batteries, fast charger, and molded hard storage case
- Smart LCD screen displays real-time battery percentage
- High speed motor delivers 19,500 RPM with a 400W rating
- Includes two distinct shields, a standard grinding guard and a cutting guard, plus 6 discs
Cons
- Limited to 3-inch wheels with a 1/2 inch maximum cutting depth
- No warranty term stated in the listing
- No CSA, UL or ETL certification stated in the listing
- Item weight not stated in the listing

RYOBI PCL445B 18V Cordless 4-1/2 in. Angle Grinder
An 18V cordless 4-1/2 inch angle grinder with a 9,000 RPM motor, die cast metal gear case, and 3-position handle.
Pros
- Full 4-1/2 inch disc size with a 9,000 RPM motor
- Die cast metal gear case for shop durability
- 3-position side handle provides flexible grip options
- Manufacturer warranty description states a 30 day limited warranty
Cons
- Sold as a bare tool without battery or charger
- Heavy bare tool weight at 5.6 pounds
- Ships in bulk packaging rather than a retail box or storage case
- No CSA, UL or ETL certification stated in the listing

WEN 7-Amp Angle Grinder with 4-1/2-Inch Wheel
A 7-amp corded 4-1/2 inch angle grinder running at 11,000 RPM with arbor adapter and reversible side handle.
Pros
- 7-amp motor produces up to 11,000 RPM and 840 watts (1.13 hp)
- Arbor adapter accommodates both 5/8-inch and 7/8-inch grinding wheels
- Reversible side handle attaches to either the left or right side with rubber grip lining
- Includes grinding wheel and wrench in the box
Cons
- Corded electric tool requiring an outlet or extension cord, not cordless
- No CSA, UL or ETL certification stated in the listing
- 4.6 pounds weight without a battery pack

ZFULVO Cordless Angle Grinder Kit 19500RPM Mini
A 16.8V mini cordless grinder with 19,500 RPM brushed motor and 6 cutting discs, but internal listing contradictions.
Pros
- High rotational speed of 19,500 RPM with a 550W rating in the table
- Compact 3-inch disc size for small-scale cutting and sanding
- Includes 6 cutting discs, fast charger, two wrenches, and gloves
- Features spindle lock, side toggle switch, and thickened anti-splash baffle plate
Cons
- No warranty term stated in the listing
- Uses a brushed motor rather than brushless
Other welders and gear to compare
Makita 9557PBX1 4-1/2" Paddle Switch Cut-Off/Angle GrinderCheck price on Amazon
DEWALT Angle GrinderCheck price on Amazon
Bosch GWS8-45 4-1/2 In. Angle GrinderCheck price on Amazon
SKIL 6 Amp 4-1/2-Inch Corded Angle GrinderCheck price on Amazon
Makita 9557PB 4-1/2" Paddle Switch Angle GrinderCheck price on Amazon
WORKPRO Air Angle Die GrinderCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Power Source | Wheel Size | No Load Speed | Weight | Batteries Included | Warranty |
|---|---|---|---|---|---|---|---|
| DEWALT DCG408B | 9.5/10 | 20V MAX cordless | 4-1/2 in | Up to 9,000 RPM | 3.55 lb (bare tool) | None (bare tool) | Not stated |
| TEENO 21V 3-Inch | 9.5/10 | 21V cordless (400W) | 3 in | 19,500 RPM | Not stated | 2x 2.0Ah | Not stated |
| RYOBI PCL445B | 9.4/10 | 18V cordless | 4-1/2 in | 9,000 RPM | 5.6 lb | None (bare tool) | 30 days |
| WEN 944 | 9.3/10 | Corded electric (7-amp, 840W) | 4-1/2 in | 11,000 RPM | 4.6 lb | Not applicable (corded) | Not stated |
| ZFULVO MINI-JIMO01 | 9.3/10 | 16.8V cordless (550W) | 3 in | 19,500 RPM | 1100g (bullets), 3.6 lb (table) | 2 (bullets), 1 (table) | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 9 October 2026. Where a listing states a figure two ways, the table shows both.
Buying guide: how to choose the right cheap cordless angle grinder
Disc diameter and cutting depth
The grinders compared here fall into two size categories: compact 3-inch mini cut-off tools and standard 4-1/2-inch angle grinders. TEENO lists a maximum cutting depth of 1/2 inch for its 3-inch disc, which suits thin sheet, small brackets, and conduit. The 4-1/2-inch models from DEWALT, RYOBI, and WEN accommodate larger wheels for deeper cuts and wider weld preparation on thicker steel plate.
Motor design and rotational speed
Motor technology dictates efficiency and maintenance. DEWALT uses a brushless motor rated up to 850 MWO at 9,000 RPM, which eliminates brush wear during prolonged use. ZFULVO lists a brushed motor rated at 550 watts, while TEENO lists a 400W motor. The compact 3-inch models spin at 19,500 RPM to maintain rim speed on smaller discs, while the larger 4-1/2-inch models run between 9,000 RPM and 11,000 RPM. WEN achieves 11,000 RPM and 840 watts (1.13 hp) through its 7-amp corded motor.
Bare tools versus complete battery kits
Buying a bare tool saves money if you already use compatible batteries, but requires separate purchases if you do not. DEWALT and RYOBI ship as bare tools without batteries or chargers. In contrast, TEENO includes two 21V 2.0Ah batteries, a fast charger, 6 discs, two guards, and a hard case. ZFULVO includes 6 cutting wheels and a charger, though its listing disagrees on whether one or two batteries ship in the package.
Cordless portability versus corded runtime
Cordless grinders provide mobility for repairs in the field, on farm equipment, or around large weldments where cords cannot reach. However, heavy grinding discharges batteries quickly. Corded grinders like the WEN 944 deliver continuous power from a standard outlet without downtime for recharging. WEN includes an arbor adapter for 5/8-inch and 7/8-inch wheels, though its specification table contains an odd contradiction listing gas alongside electric power.
Safety features, switches, and guards
Grinders require careful handling to prevent kickback. DEWALT incorporates Perform and Protect features, including an electronic Kickback Brake and E-Clutch to stop rotation during a wheel pinch, operated via a paddle switch. TEENO uses a dual-action safety lock that requires pushing before squeezing to start, and supplies dedicated cutting and grinding shields. RYOBI provides a 3-position side handle and a die cast metal gear case for physical control. None of the five listings claim third-party CSA, UL, or ETL safety certifications.
Written warranties and listing accuracy
A clear warranty provides protection against early motor or switch failures. RYOBI is the only pick here with a stated warranty term, offering a 30 day limited warranty in its specification table. DEWALT, TEENO, WEN, and ZFULVO provide no verified concrete warranty coverage. Check listing details carefully before purchase, as budget listings can contradict themselves on weights, included packs, and specifications.
Grinding safety. Angle grinders generate hot sparks and metal debris, and damaged wheels can shatter at high RPM. Always wear full eye and face protection, heavy leather welding gloves, hearing protection, and flame-resistant clothing as manufacturer manuals direct. Keep guards positioned between the wheel and your hands, hold 4-1/2-inch tools firmly with both hands, clamp workpieces securely, and disconnect battery packs or unplug the power cord before replacing accessories. Follow OSHA grinding guidelines and keep your work area clear of combustible materials.
FAQ for welders
What does an angle grinder do?
An angle grinder is a handheld power tool used in metal fabrication, welding, and construction for grinding, cutting, cleaning, and surface preparation. Equipped with the right abrasive wheel, it cuts metal tubing, bevels steel plate before welding, removes rust and slag from completed joints, and smooths rough surfaces. Mini 3-inch models handle light detail cutting, while 4-1/2-inch grinders tackle heavy material removal.
How to use a cordless angle grinder safely?
Inspect the wheel for cracks or defects and confirm the guard is locked in position before starting any work. Hold 4-1/2-inch tools firmly with both hands, let the motor reach full operating RPM before contacting the metal, and cut smoothly without forcing the wheel. Always disconnect the battery pack before swapping accessories or adjusting guards, and wear eye, face, and hand protection.
Are cordless angle grinders worth it?
Cordless angle grinders are worth buying for quick cuts, field repairs, and weld preparation away from wall outlets. They eliminate tripping hazards and extension cord tangles around welding tables and shop equipment. However, continuous heavy grinding depletes battery packs quickly, making spare batteries or a corded backup grinder useful for all-day shop fabrication.
What is the best small angle grinder for tight spaces?
For confined locations like under vehicle chassis or inside metal cabinets, a compact 3-inch cut-off tool like the TEENO 21V provides superior maneuverability. Its one-hand design, smart LCD battery screen, and 19,500 RPM speed allow precise cutting up to 1/2 inch deep. Standard 4-1/2-inch grinders provide more power but are too bulky for awkward corners.
What is the best battery angle grinder for heavy cutting?
For demanding fabrication jobs, a 4-1/2-inch model with a brushless motor such as the DEWALT DCG408B delivers the highest output. Its motor produces up to 850 MWO at 9,000 RPM, and built-in Kickback Brake and E-Clutch systems help protect against binding during heavy cuts. Users already invested in the DEWALT 20V battery platform get shop-grade performance in a 3.55 lb bare tool.
Related: best cordless angle grinder for standard and heavy-duty shop picks, metal fab tools category guide, and our best welding table for home shop. Also see our best welding gloves for mig. Also see our best welding ground clamp. Also see our best horizontal band saw. Also see our best cold cut saw. Also see our best 3 inch cut off wheels.
More related guides (870)
- best angle grinder
- what is cold saw
- cold saw for metal
- flap disc for angle grinder
- best magnetic drill under 1000
- best flap disc for metal
- best cut off wheels for metal
- best angle grinder for cutting metal
- horizontal band saw for aluminum
- best chop saw for metal cutting
- small chop saw for metal
- cold saw vs band saw
- flap disc type 27 vs 29
- cut off wheel vs grinding wheel
- flap disc vs wire wheel
- best angle grinder for welding prep
- how to bevel metal for welding
- what grit flap disc for weld grinding
- how to remove mill scale before welding
- best flap disc for weld grinding
- best cut off wheel for steel
- best metal chop saw for home shop
- best cold saw for small shop
- best portable band saw for metal
- best tube bender for hobby fabrication
- best drill press for metalworking
- best tubing notcher
- abrasive chop saw vs cold saw
- flap disc vs grinding wheel
- how to use bead roller
- best angle grinder under 50
- best cordless angle grinder under 100
- best metal chop saw under 200
- best cold cut saw under 500
- best portable band saw under 200
- best drill press under 200
- metal nibbler for drill
- tube bender for stainless steel
- best flap disc for aluminum
- tube bender for brake lines
- best 14 inch metal chop saw
- best die grinder
- best sheet metal nibbler
- drill press vs mill
- how to use a shrinker stretcher
- best die grinder under 50
- best sheet metal nibbler under 50
- best tube bender under 100
- best die grinder cut off wheels
- best drill press vise
- best straight air die grinder
- best cordless band saw
- how to use a tube bender
- what is die grinder
- how to use a vertical band saw
- best cut off wheel for cast iron
- best angle grinder for beveling steel
- makita 9557pbx1 review
- worx wx801l review
- makita 9557pb review
- porter-cable pc750ag review
- black+decker bdeg400 review
- estwing e3-wc review
- best angle grinder with speed control
- best electric metal nibbler
- wen 3650 review
- horizontal vs vertical metal band saw
- dry cut saw vs abrasive chop saw
- magnetic drill vs benchtop drill press
- rotary draw vs mandrel tube bender
- sheet metal brake vs pan brake
- metal shear vs metal nibbler
- slip roll vs sheet metal brake
- metal belt grinder vs disc sander
- bead roller vs english wheel
- shrinker stretcher vs english wheel
- portable band saw vs chop saw
- bench grinder vs belt grinder for metal
- zirconia vs ceramic flap disc
- best flap disc for rust removal
- best angle grinder for trailer building
- best tig torch under 80
- copper vs brass welding ground clamp
- dremel 8240-5 review
- metal cold saw vs horizontal band saw
- benchtop vs floor standing drill press
- best welding vise under 50
- dewalt dcs387b review
- straight vs 90 degree die grinder
- paddle switch vs slide switch angle grinder
- craftsman cmeg100 review
- tubing notcher vs hole saw jig
- laser cleaning machine vs sandblaster
- portable band saw vs cold cut saw
- dewalt dws780 review
- skilsaw spt77wml-01 review
- dremel 4300 review
- dewalt dw758 review
- best tig rod under 30
- best cut off wheels under 20
- die grinder vs angle grinder
- cut off tool vs angle grinder
- plasma cutter vs band saw
- portable band saw vs angle grinder
- ingersoll rand 3101g review
- pneumatic vs electric die grinder
- deep cut vs compact band saw
- best metal shears for roof flashing
- best wire brush for welding
- best sheet metal shears
- tubing notcher vs tubing cutter
- best angle grinder for beginners
- best cut off wheel for aluminum
- best welding electrode holder under 30
- best drill press for home garage
- best metal shears for beginners
- portable band saw vs horizontal band saw
- brushless vs brushed angle grinder
- best sheet metal shears for aluminum
- best angle grinder for cutting rebar
- best sanding disc for metal
- best cut off wheel for rebar
- flap disc vs sanding disc
- circular saw vs angle grinder for metal
- bi-metal vs carbide band saw blade
- propane vs acetylene cutting torch
- sheet metal shears vs tin snips
- fiber disc vs flap disc
- best die grinder for weld cleanup
- corded vs cordless angle grinder
- hacksaw vs band saw for metal
- chop saw vs horizontal band saw
- best die grinder for beginners
- mapp gas vs acetylene torch
- best angle grinder for small hands
- wire wheel vs wire cup brush
- best wire brush for rust removal
- best sanding disc for aluminum
- best cut off wheel for exhaust pipe
- angle grinder vs bench grinder
- best hole saw for metal
- best hand seamer for sheet metal
- ryobi vs milwaukee angle grinder
- best chop saw blade for steel
- best band saw blade for metal
- best step drill bit for sheet metal
- cobalt vs hss drill bits for steel
- best contact tips for mig welder
- best drill bits for steel
- reciprocating saw vs hacksaw for metal
- best sanding disc for stainless steel
- best grinding wheel for steel
- best wire wheel for stainless steel
- best tube bender for copper pipe
- best hole saw under 30
- best cordless angle grinder for job site
- best oxy acetylene torch kit for home shop
- brass vs steel wire brush
- best chop saw blade for aluminum
- best cut off wheels under 10
- quick clamp vs c clamp for welding
- best wire wheel for angle grinder
- best cordless chop saw for job site
- portable band saw vs reciprocating saw
- die grinder vs cut off tool
- stainless vs carbon steel wire wheel
- best tube bender for handrails
- best sanding disc for rust removal
- best hole saw for stainless steel
- best band saw blade for aluminum
- bi-metal vs carbide hole saw
- pipe bender vs tube bender
- best deburring tool for stainless steel
- best hand seamer for gutters
- rotary tool vs die grinder
- best tube bender for aluminum tubing
- jigsaw vs hacksaw for metal
- best step drill bit under 15
- best wire brush for aluminum
- best band saw blade under 25
- step drill bit vs hole saw for sheet metal
- best hole saw for aluminum
- best drill bits for cast iron
- best band saw blade for stainless steel
- cordless vs corded die grinder
- best deburring tool for aluminum
- cut off wheel vs flap disc
- pedestal vs bench grinder
- best deburring tool for steel
- drill press vs hand drill
- best step drill bit for aluminum
- best rivet gun for steel rivets
- bench grinder vs die grinder
- best step drill bit for auto body
- fixed vs variable speed angle grinder
- best hand seamer for ductwork
- best bench vise for farm shop
- metal nibbler vs jigsaw
- best sanding disc for weld cleanup
- best belt grinder for welders
- best hacksaw for cutting steel
- best center punch tool
- best belt grinder for knife making
- best spot weld cutter
- oscillating tool vs angle grinder
- black oxide vs cobalt drill bits
- best small bench vise
- best heavy duty bench vise
- annular cutter vs hole saw
- best hole saw for sheet metal
- best center punch for hardened steel
- best drill bits for copper
- strip disc vs flap disc
- best heavy duty rivet gun
- best magnetic angle finder
- best 90 degree corner clamp
- best metal scribe
- best metal file set
- best locking pliers set
- best cordless angle grinder for home garage
- best bench vise under 100
- best reciprocating saw blade for metal
- best jigsaw blade for sheet metal
- best clamp on bench vise
- best rivet gun for metal
- best cordless band saw for job site
- best combination square for metal work
- cutting oil vs tapping fluid
- best die grinder for home shop
- carbide burr vs grinding stone
- portable band saw vs jigsaw
- rivet gun vs rivet nut tool
- best hacksaw blade for stainless steel
- best bench grinder for beginners
- best rivet gun for aluminum rivets
- best jigsaw blade for aluminum
- best hacksaw blades
- best transfer punch set
- transfer punch vs center punch
- transfer punch vs roll pin punch
- best needle scaler for welding
- needle scaler vs wire wheel
- needle scaler vs needle gun
- best cut off wheel for square tubing
- best bench grinder for sharpening tools
- best air needle scaler
- best variable speed bench grinder
- drill press vise vs cross slide vise
- belt grinder vs angle grinder
- best bench grinder under 150
- best hacksaw under 20
- best combination square under 20
- best metal file set under 30
- best locking pliers set under 50
- best magnetic angle finder under 30
- sanding disc vs grinding wheel
- spot weld cutter vs spot weld drill bit
- best dust shroud
- cutting fluid vs wd 40
- cordless vs corded metal nibbler
- best tungsten carbide burr set
- best bench grinder stands
- best metal files for metalworking
- best angle grinder stand holder
- best bench grinder wheel dresser
- best rivet gun kit
- best sanding disc under 20
- best center punch for metal
- best rivet gun under 40
- protective cover for welding leads
- pneumatic vs electric rivet gun
- angle grinder side handle
- tube cutter set
- countersink bit metal
- best cutting fluid for stainless steel
- hacksaw blade tpi for aluminium
- end mill set
- best tungsten carbide burr set under 30
- best heavy duty angle grinder for fabrication
- welding cable vs extension cord
- best cutting fluid for aluminum
- magnetic drill vs hand drill
- best reciprocating saw blade for pipe cutting
- best jigsaw blade for steel tubing
- best countersink bit for aluminum
- best carbide burr set for stainless steel
- cobalt vs bi-metal hole saw
- straight vs offset tin snips
- long locking pliers
- paint marker metal
- weld inspection mirrors
- flap disc 4 1/2
- best welder backpack for apprentices
- tap wrench small
- rivet gun adapter
- tap wrench t-handle
- dial indicator tool
- tube cutter mini
- best metal scribe under 10
- diamond vs abrasive cut off wheel
- wire brush round
- step drill bit vs twist drill bit
- sanding belts 6 x 48
- buffing wheel metal
- grinding wheel 4 inch
- knockout punch set hydraulic
- bar clamps 24 inch
- best blasting media
- best cold chisel set
- best bolt cutters
- best cold chisel for metal
- welder tool bag
- sanding drum kit
- single cut carbide burr
- best hole saw under 50
- portable vs stationary band saw
- sheet metal brake vs hand seamer
- best tube bender under 20
- electric vs hand metal nibbler
- hacksaw vs angle grinder for metal
- variable pitch vs constant pitch band saw blade
- jigsaw vs reciprocating saw for metal
- best pneumatic air hammer
- chop saw blade vs cut off wheel
- grinding wheel adapters
- digital angle finder for welding
- tap wrench adjustable
- 4 1/2 grinding wheels
- sanding belt 4 x 36
- sanding belts 3 x 21
- digital angle finder vs t bevel
- drill press locking clamp
- air hammer vs electric hammer
- stainless steel blind rivets
- wire brush rotary tools
- best sheet metal crimpers
- digital angle finder vs digital level
- hand held wire brush
- ceramic sanding belt
- 32 tpi hacksaw blade
- welding square vs combination square
- best air hammer for automotive work
- sanding disc set
- best ceramic sanding belt under 30
- tap wrench large
- number metal stamp set
- die grinder disc holder
- best angle grinder with speed control under 100
- metal scribe vs soapstone marker
- bolt cutters vs hacksaw for metal
- heavy dead blow hammer
- wire wheel vs sanding disc
- wire brush 4 inch
- locking pliers welding
- best cordless angle grinder for fence repairs
- hand held bolt cutters
- long handle dead blow hammer
- bolt cutters 18 inch
- best sheet metal crimpers under 40
- metal circular saw vs chop saw
- sanding belt 1 x 30
- tube cutter big
- small wire brush set
- locking pliers thin
- surface conditioning discs 2 inch
- extra long hacksaw blades
- air hammer vs chipping hammer
- press brake vs sheet metal brake
- bead roller vs slip roll
- rivet gun air tool
- grinder to saw adapter
- welding cable crimping tool
- steel pipe cutter vs hacksaw
- sanding belt vs sanding disc
- dead blow hammer vs ball peen hammer
- abrasive sanding belt cleaner
- cup type wire brush
- best digital angle finder under 30
- sanding belts zirconia
- digital combination square
- best sanding belt under 20
- best bolt cutters under 30
- hacksaw blade w/ handle
- dead blow hammer steel face
- sheet metal gauge thickness tool
- 1/2 x 18 inch sanding belts
- grinding sanding belt
- best dial indicator under 50
- best band saw blade under 35
- best hand seamer under 50
- best digital combination square under 75
- best bolt cutters under 50
- best hole saw under 75
- best drill press vise under 50
- best heavy dead blow hammer under 50
- digital caliper large
- sanding belt wide
- sanding discs 5 inch 8 hole
- ball peen hammer metalwork
- ball peen hammer set wood handle
- metal knockout hole punch set
- air hammer vs needle scaler
- blind rivets 1/8
- metal stamp set 3/8
- center punch auto
- metal file wood handle
- countersink bit cobalt
- end mill high speed steel
- glass bead vs aluminum oxide blasting media
- digital caliper professional
- sanding disc car 600 grit
- buffing compound copper
- tap wrench square
- dead blow hammer metal end
- metal file narrow
- combination square set 6 and 12
- bolt cutters pliers set
- best digital caliper under 100
- buffing wheel stainless
- tap wrench standard
- digital vs dial caliper
- cordless vs corded rivet gun
- best ball peen hammer under 35
- best welding cable crimping tool under 30
- ball peen vs cross peen hammer
- blind rivet pliers vs rivet gun
- electric metal shears vs hand shears
- carbide vs hss end mill
- best jigsaw blade for stainless steel
- air vs electric angle grinder
- best countersink bit for stainless steel
- deburring tool vs metal file
- best angle grinder for car restoration
- tube cutter vs pipe cutter
- best metal shears for corrugated roofing
- best hole saw for cast iron
- annular cutter vs twist drill bit
- best bolt cutters for rebar
- best reciprocating saw blade for cast iron
- best carbide burr for aluminum
- fixed vs variable speed bench grinder
- tube cutter aluminum
- bi-metal vs carbide reciprocating saw blade
- angle grinder vs rotary tool
- ceramic vs zirconia sanding belt
- aviation snips vs tin snips
- aluminum oxide vs silicon carbide grinding wheel
- dead blow hammer vs rubber mallet
- emery cloth roll
- abrasive pads for metal
- bristle disc for aluminum
- drill bit set cobalt
- 18v vs 20v cordless angle grinder
- band saw blades 44 7/8
- best handheld induction heater
- band saw blades 35 3/8
- best quality pin punch
- abrasive pads for aluminum
- abrasive pad for paint removal
- bristle disc for drill
- bristle disc for grinder
- induction heater for pipe
- quick change disc type r
- best bristle disc under 30
- best carbide burr for cast iron
- emery cloth vs sandpaper for metal
- induction heaters for welding
- emery cloth for sanding metal
- punch set for steel
- emery cloth wheel for die grinder
- induction heater vs torch
- bristle disc vs wire wheel
- digital vs vernier caliper
- best heavy duty rivet gun under 100
- bristle disc vs flap disc
- best flap disc under 25
- induction heater large
- bosch vs ryobi angle grinder
- emery cloth grit 360
- bosch vs metabo angle grinder
- quick change disc vs flap disc
- tungsten grinder vs bench grinder
- best bench buffer
- shop crane electric
- cnc mill for steel
- steel vs aluminum blind rivets
- bi-metal vs carbon steel hacksaw blade
- best propane forge for blacksmithing
- micrometer vs caliper
- best propane forge under 125
- soda blaster vs sandblaster
- carbide vs cobalt drill bits
- best annular cutter for magnetic drill
- belt grinder vs belt sander
- cnc lathe tools
- best bench top grinder
- 118 vs 135 degree drill bit
- flap disc grit 60
- flap disc grit 80
- bosch vs milwaukee angle grinder
- bolt cutters vs rebar cutter
- single cut vs double cut carbide burr
- garnet vs aluminum oxide blasting media
- sandblasting vs wire wheel for rust removal
- metabo vs milwaukee angle grinder
- hand vs hydraulic rebar bender
- best pneumatic air hammer under 150
- best drill press
- cnc mill fixture clamps
- air powered deburring tool
- best magnetic drill for fabrication shop
- garnet vs plastic blasting media
- m35 vs m42 cobalt drill bits
- best drill bit set for wood and metal
- metabo vs ryobi angle grinder
- bench grinder vs bench buffer
- titanium vs black oxide drill bits
- gantry crane large
- best hand held band saw
- copper deburring tool
- steel wire brush
- wire brush brass
- wire brush wheel
- grinding wheel disc
- best cnc 1/4 end mill
- hydraulic rebar bender
- bead roller power drive
- large sandblasting cabinet
- best magnetic drill press
- best powder coating gun for home use
- best tin snips for sheet metal
- best sheet metal brake for gutters
- best grinding wheel to remove paint from concrete
- twist drill bit set power tool accessories
- angle grinder arbor adapter 5/8 to 7/8
- 4 1/2 sanding disc for angle grinder
- rebar cutter electric
- roll pin punch set for air hammer
- steel sheet metal gauge chart
- how to sharpen drill bit
- standard drill bit size
- types of drill bit
- stainless sheet metal gauge chart
- how to powder coating at home
- cutting torch tips for oxygen acetylene cutting
- angle grinder uses
- what size drill bit to tap 8/32
- manual arbor press
- how to remove rivet nut
- best air hose coupler
- best blacksmith hammers
- band saw blade sizes
- blacksmith hammers cross peen
- rotary file tungsten
- 36 grit quick change disc 2 ceramic al
- rotary file for metal
- best end mill for cutting hardened steel
- magnetic base with on and off switch
- best end mill bit for cutting aluminum
- air hose reel with retractable 50 foot hose
- best small shop dust collector for metal
- best aluminum oxide blasting media for steel
- best auto body hammer and dolly set
- best saw blade for cutting metal roofing
- table top end mill
- rolling type flaring tool
- propane welding torch kit
- best 2 burner forge
- forge burner kit for knife making
- abrasive cartridge roll
- extra long screw extractor
- mesh abrasive roll
- screw extractor vs bolt extractor
- abrasive cloth roll
- best bolt extractor set
- best drift punch set
- best screw extractor set
- abrasive roll for copper pipe
- screw extractor for small screws
- best air tool oil
- oil for small air compressor
- screw extractor set with left hand drill bits
- screw extractor for #6 screw
- best forge refractory cement
- best digital level angle gauge
- cut off wheel vs cold saw
- best high flow air coupler
- best diamond cup wheel
- best screw extractor
- best heavy duty air hammer
- best heavy duty come along
- best air blow gun
- best oscillating multi tool
- oscillating multi tool blades extra long
- oscillating multi tool metal cutting blade
- air blow gun kit with quick connect
- air blow gun aluminium with long nozzle
- best mini tube cutter under 15
- how to change a chop saw blade
- grinding wheel types
- oxy fuel cutting setup
- rivet gun uses
- how to use digital calipers
- oxy acetylene torch setup
- dead blow hammer uses
- manual tubing notcher
- drill bit size r
- center drill bit sizes
- die grinder uses
- arbor press uses
- ball peen hammer uses
- aluminum sheet metal gauge chart
- air hammer uses
- how to use a sheet metal bender
- angle grinder parts
- types of chop saws
- bench grinder machine parts
- end mill sizes
- temperature stick for welding
- how to cut metal wire
- parts washer with filter
- types of blacksmith hammers
- parts washer ultrasonic
- screw extractor set how to use
- air hose coupler sizes
- hss vs cobalt drill bit
- end mill types
- metal file types
- nibbler vs snips for sheet metal
- sanding belt sizes
- parts of a cutting torch
- digital caliper battery size
- drill press speed chart
- gas forge vs coal forge
- how to coil band saw blade
- chop saw sizes
- air vs electric die grinder
- manual square tube bender
- drill bit tips
- mini lathe vs mini mill
- led vs fluorescent shop lights
- how to use a rivet nut
- blasting media chart
- metal lathe for beginners
- chop saw vs band saw for metal
- hole saw vs knockout punch
- sizes of angle grinders
- air pressure regulator repair
- #2 center drill dimensions
- dial indicator vs digital indicator
- sandblasting nozzle size chart
- how to use pipe threader
- how to sharpen band saw blades
- angle grinder arbor sizes
- how to clean metal files
- manual sheet metal brake
- sandblasting nozzle types
- how to use center punch
- band saw blade speed chart
- types of buffing wheel
- grinding wheel uses
- types of band saw blades
- dial indicator types
- drill press with laser guide
- angle grinder safety guard
- die grinder tips
- manual horizontal band saw
- types of band saws
- drill press safety
- ultrasonic parts cleaner solution
- parts washer cleaner
- parts washer brush and hose
- propane vs charcoal forge
- graphite vs clay crucible
- parts washer drum mounted
- 2×42 vs 2×72 belt grinder
- what is pneumatic tool oil
- screw extractor size chart
- how to use thread gauge
- sandblasting nozzle tips
- what can you clean in an ultrasonic cleaner
- air hammer bit types
- types of rivet nuts
- parts washer large
- blasting media types
- hacksaw blade sizes
- blind rivet sizes
- chop saw blade size
- types of metal clamps
- rivet gun parts
- manual knockout punch set
- types of lathe tools
- large size tap and die set
- table top parts washer
- uses for portable band saw
- bench grinder angle guide
- what is a file card
- feeler gauge size chart
- types of hardness testers
- how to clean circular saw blades
- how hot does a powder coating oven need to be
- can a saw cut metal
- powder coating gun for beginners
- how to remove powder coating from metal
- what is a roll pin punch
- parts washer tank
- high pressure parts washer
- how to clean rusty drill bits
- air hammer tips
- band saw replacement parts
- ball peen hammer sizes
- do drill bit sharpeners work
- bolt cutter sizes
- siphon vs pressure sandblaster
- how to remove blind rivets
- magnetic vs digital angle finder
- types of lifting clamps
- rivet gun tips
- types of toggle clamps
- electric hoist vs chain hoist
- electric vs propane forge
- ryobi vs dewalt cordless angle grinder
- bench vise types
- uses for a combination square
- types of rivet guns
- angle grinder cutting guide
- angle grinder guide rail
- electric vs propane melting furnace
- electric hoist vs come along
- layout fluid vs soapstone
- shop press vs arbor press
- manual sheet metal nibbler
- parts of a chain hoist
- how to change a bench grinder wheel
- mill tool holder types
- band saw blade repair
- air compressor regulator and filter setup
- air pressure regulator parts
- how to use rust converter
- how to use height gauge
- types of strap clamp
- glass bead blasting media size chart
- types of hacksaw blades
- powder coating oven parts
- types of locking pliers
- types of blind rivets
- grinding wheel size
- types of spring clamps
- angle grinder guard types
- countersink bit sizes
- dial indicator setup
- wire brush types
- weld size gauge
- types of deburring tools
- chipping hammer uses
- die grinder parts
- angle grinder types
- options for straight edge
- propane regulator o ring size
- propane regulator repair kit
- best drill bit for drilling metal
- best drill bits for drilling stainless steel
- best drill bit to drill hardened steel
- best drill bit to drill through steel
- best induction heater for bolts
- best cut off wheels for angle grinder
- best drill bit to drill through metal
- ultrasonic cleaner sizes
- ultrasonic cleaner maintenance
- can ultrasonic cleaner remove rust
- air compressor coupler types
- bimetal vs carbide band saw blade
- how to set up a band saw
- post vise parts
- coal forge for beginners
- powder coating gun parts
- 2×72 belt grinder parts
- how to prep for powder coating
- can you paint over rust converter
- parts washer heater kit
- propane forge temperature
- parts washer accessories
- air hammer parts
- parts of a lathe chuck
- bolt cutter parts
- hacksaw blade tpi chart
- buffing wheel color chart
- bench vise size
- drill press types
- rivet gun size
- grinding wheel dresser how to use
- drill press guide for hand drill
- flap disc uses
- best step drill bit for thick metal
- best drill bit set for hard steel
- best wire wheel for bench grinder
- cutting torch repair kit
- how to use a dividing head
- types of feeler gauge
- cnc lathe setup
- cnc mill types
- cnc mill setup
- metal cutting saw types
- how to use a pin punch
- parts washer on wheels
- how to use parts washer
- parts of a ball peen hammer
- emery cloth grit chart
- dead blow hammer sizes
- needle scaler parts
- how to use blind rivets
- toggle clamp uses
- pipe clamp dimensions
- toggle clamp parts
- oxy acetylene torch types
- types of sanding discs
- tube cutter parts
- parts of a chop saw
- best step drill bit for stainless steel
- best hole saw for cutting thick metal
- best digital angle finder for table saw
- best tongs for blacksmithing
- precision straight edge
- best hole saw arbor
- best deburring tool for resin
- best bench grinder for polishing
- best belt grinder for metal
- hacksaw vs band saw
- best buffing wheel for knife making
- best buffing wheel for polishing aluminum
- best sanding belt for metal
- best buffing wheel for bench grinder
- best cutting fluid for steel
- best bolt cutter for wire shelving
- best drill bit set for impact driver
- best drill bit for stainless steel metal
- thread repair kit
- what is tapping
- drilling size for m6 tap
- manual chain hoist
- drilling size for m8 tap
- cost of a propane furnace
- parts washer portable
- how does powder coating work
- fluorescent light fixture sizes
- safety clean parts washers
- tapping types
- parts washer cabinet
- industrial parts washer
- parts washer fluid
- how to remove broken screw from metal
- drilling tips
- parts washer heater
- parts washer brush
- powder coating diy kit
- best inflatable paint booth
- best self centering drill bit
- best wire brush for drill to remove rust
- metal file uses
- best drill chuck for lathe
- best come along under 100
- best welder tool bag under 75
- best blind rivets under 20
- best tube cutter set under 40
- best punch set for steel under 30
- best grinding wheel for sharpening metal lathe tools
- best sanding belt for aluminum
- blind rivets vs solid rivets
- thin vs standard cut off wheel
- metric vs sae tap and die set
Scoring, line by line
Each grinder is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DEWALT DCG408B | 9.5 | 30 | 22 | 20 | 0 | 0 |
| TEENO 21V 3-Inch | 9.5 | 27 | 20 | 24 | 0 | 0 |
| RYOBI PCL445B | 9.4 | 28 | 20 | 19 | 0 | 1 |
| WEN 944 | 9.3 | 26 | 19 | 18 | 0 | 0 |
| ZFULVO MINI-JIMO01 | 9.3 | 24 | 16 | 19 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.





