Types of Blind Rivets: Sizes, Materials and Uses
Blind rivets fasten parts where you can reach a single side, and the right type depends on the material, the hole and the grip.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
INCLY 1200PCS Pop Rivets & Trifold Rivets9.7/10View on Amazon - 2
smseace 1500Pcs Aluminum Pop Rivets Kit9.6/10View on Amazon - 3
Pop Rivets Assortment Kit9.5/10View on Amazon - 4
140Pcs 3/16 Pop Rivets Assortment Kit Aluminum9.5/10View on Amazon
A blind rivet joins sheet and parts where you can only reach a single side, and the types of blind rivets on the shelf differ in how the body grips, what material it suits, and how much load the head can spread. Pick the wrong type and the rivet pulls through soft material or leaves a joint that works loose. This guide covers the main types, the sizes each kit in this guide holds, and how to match a rivet to the job.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

INCLY 1200PCS Pop Rivets & Trifold Rivets
A 1200-piece kit with 14 sizes of standard pop rivets, a tri-fold size and 550 washers for thin and soft material.
Pros
- 14 sizes of standard pop rivets from 3/32 to 1/4 inch, plus a tri-fold size
- 550 washers in 5 sizes help reduce pull-through on thin or soft material
- Tri-fold rivets spread over a larger area on thin sheet, plastic and fiberglass
- Washers are 304 stainless steel, with aluminum rivets and a steel mandrel
Cons
- Only 10 pieces each of the 1/4 inch sizes, so a big job runs out fast
- Only 30 tri-fold rivets, so they suit small jobs on soft material
- Aluminum bodies suit sheet and trim, not heavy steel joints
- Washers add a step to every rivet, so setting takes longer

smseace 1500Pcs Aluminum Pop Rivets Kit
A 1500-piece kit with 900 aluminum rivets in 14 sizes and washers, packed in a portable toolbox with dividers.
Pros
- 900 aluminum rivets in 14 sizes, from 3/32 to 1/4 inch
- Portable toolbox with removable dividers and a color-coded label
- Washers included in the kit
- 100 pieces of the 3/32 inch sizes for small repair work
Cons
- Only 13 pieces of the 1/4 inch by 1/2 inch size
- Only 45 pieces of the 3/16 inch by 5/8 inch size
- Aluminum rivets suit light sheet work, not thick steel plate
- No warranty term is stated

Pop Rivets Assortment Kit
A 200-piece kit with 8 sizes of aluminum blind rivets from 1/8 to 3/16 inch, backed by a 12-month warranty.
Pros
- 8 sizes from 1/8 to 3/16 inch, with 40 pieces of the 1/8 inch sizes
- A 12-month warranty and a 60-day money-back term
- Aluminum grip with a steel mandrel, listed as corrosion resistant
- Storage box keeps the 200 pieces sorted
Cons
- Only 15 pieces of each 3/16 inch size
- The kit tops out at 3/16 inch, so larger holes need a bigger kit
- No tri-fold rivet for thin or soft material
- The box holds the rivets but no washers are included

140Pcs 3/16 Pop Rivets Assortment Kit Aluminum
A 140-piece kit of 3/16 inch aluminum blind rivets in 5/16, 3/8, 1/2 and 5/8 inch lengths, in a portable case.
Pros
- 140 pieces of 3/16 inch rivets, with 43 pieces of the 5/16 and 3/8 inch lengths
- Dome head rivets for metal and automotive work
- Single-sided installation suits tight spaces and hard-to-reach areas
- Portable transparent case keeps sizes apart in plastic bags
Cons
- Only 25 pieces of the 3/16 inch by 5/8 inch size
- This kit covers a single diameter, so other hole sizes need a different kit
- No washers are included for thin or soft material
- No warranty term is stated
Types of blind rivets in one paragraph
The types of blind rivets in common use are the standard pop rivet, the tri-fold rivet and the washer-backed pop rivet. A standard pop rivet has an aluminum body and a steel mandrel that pulls the body tight and snaps off, leaving a dome head on the front. A tri-fold rivet splits into legs that spread over a larger area, which suits thin sheet metal, plastic, fiberglass and composites. A washer-backed rivet adds a 304 stainless steel washer behind the head, which spreads the load where a hole runs oversized or the material runs soft.
Side by side
| Standard pop rivet | Tri-fold rivet | Pop rivet with washer | |
|---|---|---|---|
| How it grips | Mandrel pulls the body tight, then snaps off | Body splits and spreads over a larger area | Washer spreads the load and resists pull-through |
| Suits | Metal, automotive, furniture and repair work | Thin sheet metal, plastic, fiberglass and composites | Thin or soft material and oversized holes |
| Sizes in this guide | 3/32, 1/8, 5/32, 3/16 and 1/4 inch | 3/16 inch by 5/8 inch | 3/32, 1/8, 5/32, 3/16 and 1/4 inch |
| Material | Aluminum body with a steel mandrel | Aluminum with a steel mandrel | Aluminum rivet with a 304 stainless steel washer |
The table above shows the types side by side. Standard pop rivets cover the widest size range in this guide, from 3/32 to 1/4 inch, while tri-fold rivets suit soft material and washers suit oversized holes. Match the type to the material first, then pick the size from the kit that holds it.
When a standard pop rivet is the better choice
- Metal and automotive work. Aluminum rivets with a steel mandrel suit sheet metal, cars, furniture and repair work, indoors and outdoors.
- A wide size range. Kits in this guide hold standard pop rivets from 3/32 to 1/4 inch, so a single kit covers small trim and larger sheet.
- Simple setting. A rivet gun pulls the mandrel and snaps it off, with no access needed from behind the joint.
- Deep stock of a size. The kits here hold up to 100 pieces of the small sizes, so repeat jobs stay covered.
The types of rivet guns guide covers the tool that sets these rivets.
When a tri-fold rivet is the better choice
- Thin sheet metal. The body splits and spreads, so the rivet grips where a standard rivet would pull through.
- Plastic and fiberglass. Tri-fold rivets suit plastic frames, fiberglass panels and composites, where the spread head shares the load.
- Soft material. Wood frames and laminates hold better under a spread head than under a narrow one.
- Kayak and marine repair. The INCLY kit lists kayak and marine boat use, where the tri-fold rivets suit thin sheet metal.
How to pick a size
Start with the hole: the rivet diameter must match the hole, and the kits in this guide cover 3/32, 1/8, 5/32, 3/16 and 1/4 inch diameters. Then match the length to the grip, which is the thickness of the parts being joined: the kits here hold lengths from 1/4 to 5/8 inch. A rivet that runs too short leaves a weak joint, while a rivet that runs too long leaves a loose head, so check the length against the grip before setting. Where the material runs thin or soft, add a washer or switch to a tri-fold rivet. For the material choice, see the steel vs aluminum blind rivets guide.
Blind rivet kits for the job
The kits below hold the rivets this guide covers, so pick the kit that holds the sizes and types your job needs.
FAQ for welders
What is a blind rivet?
A blind rivet is a fastener that joins parts where you can only reach a single side. A rivet gun pulls the mandrel, which swells the body behind the joint and then snaps off, leaving a head on the front. The kits in this guide use aluminum bodies with steel mandrels.
What is the difference between a standard pop rivet and a tri-fold rivet?
A standard pop rivet pulls tight and leaves a dome head, which suits metal, automotive and furniture work. A tri-fold rivet splits into legs that spread over a larger area, which suits thin sheet metal, plastic, fiberglass and composites. Pick the standard rivet for firm material and the tri-fold rivet where the material runs thin or soft.
Which blind rivet size should I pick?
Match the diameter to the hole first, then match the length to the grip, which is the thickness of the parts being joined. The kits in this guide cover diameters from 3/32 to 1/4 inch and lengths from 1/4 to 5/8 inch. Where the hole runs oversized, a washer behind the head stops the rivet pulling through.
Can blind rivets join plastic and fiberglass?
Yes, with the right type: tri-fold rivets suit plastic, fiberglass and composites, since the spread head shares the load instead of pulling through. The INCLY kit lists tri-fold rivets in 3/16 inch by 5/8 inch for this work. Standard pop rivets suit firm sheet, while washers help where plastic runs thin.
Do blind rivets work on aluminum and steel?
The rivets in this guide are aluminum bodies with steel mandrels, and the maker lists them as corrosion resistant for indoor and outdoor use. They suit aluminum sheet, steel sheet, automotive panels and furniture, where the joint needs a firm grip from a single side.
Related: types of rivet guns, blind rivet pliers vs rivet gun, best rivet gun for steel rivets, and the metal fab tools hub.




