How to Use Blind Rivets: Step-by-Step Guide
How to use blind rivets: match the nosepiece to the rivet, drill the hole, set the rivet with a manual, plastic or cordless gun, and check the joint.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Cordless Rivet Gun Kit with 20V Battery, Box9.5/10View on Amazon - 2
VEVOR Pop Rivet Gun Kit, with 5 Interchangeable9.5/10View on Amazon - 3
Mardatt 42Pcs Plastic Rivet Gun Set with 40Pcs9.4/10View on Amazon
A sheet metal patch that needs fastening from one side only, a bracket on a trailer panel, a repair where the back of the joint stays out of reach: that is the job for a blind rivet. How to use blind rivets comes down to matching the rivet to the hole, drilling once, and setting the rivet with a gun that pulls the mandrel until it snaps. This guide walks through the steps, the gear that handles each step, and the mistakes that leave a loose joint.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Cordless Rivet Gun Kit with 20V Battery, Box
A cordless rivet gun with a 20V battery that sets one rivet per second and drives over 650 rivets on a single charge, per the maker.
Pros
- Sets one rivet per second, per the maker
- A single charge drives over 650 rivets, per the maker
- Delivers 2300-2800 lbf, per the maker, with a brushless motor
- Built-in LED work light for dark or confined spaces
Cons
- No rivets are listed as included in the kit
- Fits only 1/8, 5/32 and 3/16 inch rivets, so larger rivets need another gun
- Yellow, red and black color only in the listing given
- Cordless gun needs its battery charged before a run of rivets

VEVOR Pop Rivet Gun Kit, with 5 Interchangeable
A two-handed manual pop rivet gun kit with 230 blind rivets, 5 interchangeable nosepieces, 5 drill bits and a carrying case.
Pros
- Includes 230 blind rivets, 5 nosepieces and 5 drill bits
- Tool-free quick change between 5 nosepiece sizes
- Die-cast aluminum alloy and reinforced carbon steel body
- Built-in mandrel collector and quick-disassembly design
Cons
- No warranty term is stated
- 5.42 pounds to hold through a run of rivets
- Two-handed gun leaves no hand free to hold the work
- 16 inch size needs room to swing the handles

Mardatt 42Pcs Plastic Rivet Gun Set with 40Pcs
A plastic hand rivet gun set with 40 nylon blind rivets in 4 sizes and a fastener removal tool, for automotive and repair work.
Pros
- Includes 40 nylon blind rivets in 4 sizes
- Includes a fastener removal tool
- Slim gun head suits hard-to-reach spots in narrow areas
- Anti-slip rubber sleeve on the handle
Cons
- No warranty term is stated
- Nylon rivets only, so it does not suit metal rivet work
- 40 rivets is a small count next to the VEVOR kit
- Plastic gun suits light trim work more than heavy metal work
How to use blind rivets step by step
- Match the rivet to the hole. Pick a nosepiece that fits the rivet size. The VEVOR kit lists 5 interchangeable nosepieces in 3/32, 1/8, 5/32, 3/16 and 1/4 inch, and the WonVon kit (on Amazon) lists nose pieces in 1/8, 5/32 and 3/16 inch. The Mardatt set lists nylon blind rivets in 5 x 15.8 mm, 5 x 17.2 mm, 6.3 x 25.2 mm and 6.6 x 17.2 mm.
- Drill the hole and line up the sheets. Drill through both sheets where the rivet will sit, then hold the sheets together so the holes line up. The VEVOR kit includes 5 drill bits with the gun, so the bit and the nosepiece come from the same kit.
- Load the rivet and push it through. Slide the rivet into the nosepiece with the mandrel in the gun, then push the rivet body through the hole until the head sits flat on the sheet.
- Set the rivet. Press to fasten and release to eject, as the VEVOR maker puts it, and the gun pulls the mandrel until it snaps off. The WonVon cordless gun sets one rivet per second, per the maker, and ejects the spent mandrel when the trigger is released.
- Check the joint. Look at the head on the front and the formed bulb on the back, and check that the sheets sit tight with no gap. If the rivet spins or the joint moves, drill it out and set a fresh rivet.
Which rivet gun for which job
A manual gun suits occasional rivets on metal, a cordless gun suits a run of rivets, and a plastic gun suits nylon rivets on trim and panels. The VEVOR Pop Rivet Gun Kit is a two-handed manual riveter with 230 blind rivets, 5 interchangeable nosepieces, 5 drill bits and a carrying case, and the maker says it rivets aluminum, steel and stainless steel. The WonVon Cordless Rivet Gun runs on a 20V battery, sets one rivet per second, and drives over 650 rivets on a single charge, per the maker, with a built-in LED work light for dark or confined spaces. The Mardatt Plastic Rivet Gun (on Amazon) Set is a hand riveter with 40 nylon blind rivets in 4 sizes and a fastener removal tool, and its slim gun head suits hard-to-reach spots in narrow areas. For sizes, see blind rivet sizes and types of blind rivets.
Gear for the job
The steps above need a gun that matches the rivet size, rivets to set, and a way to clear a jammed mandrel, and the three kits below cover the manual, cordless and plastic sides of that work.
Common mistakes with blind rivets
- Wrong nosepiece. A nosepiece that does not match the rivet size will not grip the mandrel right. Match the nosepiece to the rivet before you drill.
- A hole that does not line up. If the sheets shift after drilling, the rivet will not sit flat. Hold the sheets together and check the fit before you set the rivet.
- Setting a rivet with loose sheets. A rivet needs the sheets tight against each other to form a bulb on the back. Clamp the work where you can and check the joint after each rivet.
- Not clearing spent mandrels. Used mandrels collect in the gun, and a jam stops the work. The VEVOR kit has a built-in mandrel collector and a quick-disassembly design to clear jams, and the Mardatt maker says to separate the two sides of the handle gently to loosen a stuck mandrel.
Shop safety. Blind rivets throw off a snapped mandrel and metal chips, so wear eye protection, clamp the work, and keep hands clear of the gun nose. Work with ventilation when riveting painted or coated metal, and clear the bench of anything flammable before you start.
FAQ for welders
What size drill bit do I need for a blind rivet?
Match the bit and the nosepiece to the rivet size. The VEVOR kit lists 5 interchangeable nosepieces in 3/32, 1/8, 5/32, 3/16 and 1/4 inch with 5 drill bits included, and the WonVon kit lists nose pieces in 1/8, 5/32 and 3/16 inch. For more on sizes, see rivet gun sizes.
Can I use blind rivets on plastic?
Use nylon rivets for plastic trim and panels. The Mardatt set includes 40 nylon blind rivets in 4 sizes, with a fastener removal tool, and the maker lists nylon rivets with low friction and resistance to heat, UV rays and chemicals. The VEVOR and WonVon kits list metal work: aluminum, steel and stainless steel for the VEVOR, and aluminum, alloys, stainless steel, copper, carbon steel and iron for the WonVon.
How do I remove a blind rivet?
Drill out the rivet or use a removal tool, then set a fresh rivet. The Mardatt set includes a fastener removal tool for its nylon rivets. See how to remove blind rivets for the full steps.
Do I need a cordless rivet gun or a manual one?
A manual gun suits occasional rivets, and a cordless gun suits a run of rivets. The WonVon cordless gun sets one rivet per second and drives over 650 rivets on a single charge, per the maker, while the VEVOR manual gun is a two-handed riveter with 230 blind rivets in the kit. For kit options, see best rivet gun kit and types of rivet guns.
What materials can blind rivets join?
The VEVOR kit lists aluminum, steel and stainless steel, and the WonVon kit lists aluminum, alloys, stainless steel, copper, carbon steel and iron. The Mardatt set lists nylon blind rivets for automotive and repair work. Match the rivet material to the sheets you are joining.
Related: types of blind rivets, blind rivet sizes, types of rivet guns, rivet gun tips, and the metal fab tools hub.




