Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Blind Rivets vs Solid Rivets: Which One Should You Buy?

Two blind rivet packs and two solid rivet packs, all aluminum, compared on diameter, length, pack size, material and warranty, with a clear answer on which side fits the job.

Blind Rivets vs Solid Rivets: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Wensilon (250Pcs) 3/16"x1/2" Black Aluminum blindWensilon (250Pcs) 3/16"x1/2" Black Aluminum blind9.7/10View on Amazon
  2. 2Wensilon (180Pcs) 3/16"x3/4" Aluminum blind proWensilon (180Pcs) 3/16"x3/4" Aluminum blind pro9.7/10View on Amazon
  3. 3ALLCLEAN 3/16" Diameter X 3/8" Length SolidALLCLEAN 3/16" Diameter X 3/8" Length Solid9.6/10View on Amazon
  4. 4ALLCLEAN 1/4" Diameter X 1/2" Length SolidALLCLEAN 1/4" Diameter X 1/2" Length Solid9.6/10View on Amazon

Verdict. Pick blind rivets when you can reach only one side of the joint and want to set the fastener with a rivet gun. Pick solid rivets when you can reach both sides and want a dome-head joint set from both sides, like the boat rivets in this guide. The blind rivets here also carry a stated 24-month warranty; the solid rivets state none.

A sheet joint with no access to the back side calls for a different fastener than a boat seam reachable from either side, and that is the heart of the blind rivets vs solid rivets question. Blind rivets set from the front with a rivet gun, while solid rivets are set from both sides, hammered against a bucking bar or squeezed. This guide compares each type through the listings here, all aluminum, and shows which side fits which job.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The four rivets

Wensilon (250Pcs) 3/16"x1/2" Black Aluminum blind

Wensilon (250Pcs) 3/16"x1/2" Black Aluminum blind

Wensilon9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Black aluminum blind rivets with a steel mandrel, 3/16 in diameter and 1/2 in long, in a pack of 250, with a 24-month warranty.

Pros

  • Sized 3/16 in by 1/2 in for metal plate and pipe
  • Black aluminum body with a steel mandrel, corrosion and acid resistant
  • Self-plugging open end design, made to match a rivet gun
  • 24-month warranty stated in the listing

Cons

  • Single size in the pack: 3/16 in by 1/2 in only
  • Grip range not stated beyond the 1/2 in length
  • Black finish only; no plain aluminum version in this listing
  • Rivet gun not included; the rivets need one to set
Wensilon (180Pcs) 3/16"x3/4" Aluminum blind pro

Wensilon (180Pcs) 3/16"x3/4" Aluminum blind pro

Wensilon9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Aluminum blind rivets with a steel mandrel, 3/16 in diameter and 3/4 in long, in a pack of 180, with a 24-month warranty.

Pros

  • 3/4 in long, the longer of the two blind rivet packs
  • Aluminum body with a steel mandrel, corrosion and acid resistant
  • Self-plugging open end design, made to match a rivet gun
  • 24-month warranty stated in the listing

Cons

  • 180 pieces, fewer than the 250-piece pack
  • Grip range not stated beyond the 3/4 in length
  • Aluminum finish only; no black version in this listing
  • Rivet gun not included; the rivets need one to set
ALLCLEAN 3/16" Diameter X 3/8" Length Solid

ALLCLEAN 3/16" Diameter X 3/8" Length Solid

ALLCLEAN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Solid aluminum brazier head rivets, 3/16 in diameter and 3/8 in long, in a pack of 150, sold as boat rivets.

Pros

  • Solid aluminum brazier head with a round dome head
  • Premium aluminum with excellent corrosion resistance stated
  • Suits wood or wet environments, and indoor and outdoor use
  • 150 pieces in the pack, the larger of the two solid rivet packs

Cons

  • No warranty term stated in the listing
  • No rivet gun use: solid rivets set by hammering, so a rivet gun alone will not set them
  • Short 3/8 in length; the other solid rivet pack is 1/2 in long
  • No length options in this pack; one size only
ALLCLEAN 1/4" Diameter X 1/2" Length Solid

ALLCLEAN 1/4" Diameter X 1/2" Length Solid

ALLCLEAN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Solid aluminum brazier head rivets, 1/4 in diameter and 1/2 in long, in a pack of 130, sold as boat rivets.

Pros

  • 1/4 in diameter, the largest rivet here, with a 1/2 in length
  • Solid aluminum brazier head with a round dome head
  • Premium aluminum with excellent corrosion resistance stated
  • Suits wood or wet environments, and indoor and outdoor use

Cons

  • No warranty term stated in the listing
  • No rivet gun use: solid rivets set by hammering, so a rivet gun alone will not set them
  • 130 pieces, the smallest pack here
  • No length options in this pack; one size only

Side by side

Wensilon Blind Rivets 1/2 in Wensilon Blind Rivets 3/4 in ALLCLEAN Solid Rivets 3/16 in ALLCLEAN Solid Rivets 1/4 in
Gear Score 69 68 58 57
Type Blind rivets Blind rivets Solid rivets Solid rivets
Diameter 3/16 in 3/16 in 3/16 in 1/4 in
Length 1/2 in 3/4 in 3/8 in 1/2 in
Pack size 250 180 150 130
Material Black aluminum, steel mandrel Aluminum, steel mandrel Aluminum Aluminum
Head Open end Open end Brazier head Brazier head
Warranty 24-month 24-month Not stated Not stated

All specs here repeat what the maker rates and the listing prints, copied down 21 November 2026. No listing here states a CSA, UL or ETL listing.

Blind rivets vs solid rivets: how they differ

A blind rivet, also called a pop rivet, sets from one side. The maker describes a self-plugging open end design made to match a rivet gun: the gun pulls the steel mandrel, the rivet body spreads behind the joint, and the mandrel snaps off. That is why blind rivets suit ductwork and other jobs where the back side is out of reach. The solid rivets here are single pieces of aluminum with a brazier head. They are set from both sides, hammered against a bucking bar or squeezed with a rivet squeezer, with the dome head left showing on the work. They are sold as boat rivets, and the listing says they suit wood or wet environments. See the types of blind rivets guide for more on the blind side.

The listings draw the line clearly. Both blind rivet packs state a 24-month warranty and a corrosion and acid resistant body, while both solid rivet packs state excellent corrosion resistance and no warranty term. The choice is not about which metal lasts longer in weather; it is about access. One side only means blind rivets. Both sides in reach means solid rivets are on the table.

Size and pack

Three of the four rivets share a 3/16 in diameter: both blind rivet packs and the smaller solid rivet pack. The larger solid rivet steps up to 1/4 in diameter and 1/2 in long. Lengths run from 3/8 in on the small solid rivet to 3/4 in on the longer blind rivet, with the black blind rivet and the large solid rivet both at 1/2 in. Pack sizes run from 130 to 250 pieces: 250 in the black blind rivet pack, 180 in the longer blind rivet pack, 150 in the small solid rivet pack and 130 in the large solid rivet pack.

Material and corrosion

All four rivets are aluminum. The blind rivets add a steel mandrel, and the black pack adds a black finish. The maker of the blind rivets calls them corrosion and acid resistant, and the maker of the solid rivets calls them premium aluminum with excellent corrosion resistance. Neither listing names a coating or a plating, so take the corrosion claims as the makers’ own words.

Warranty

The warranty is the clearest split on paper. Both Wensilon blind rivet listings state a 24-month warranty. Neither ALLCLEAN solid rivet listing states a warranty term. That is the main reason the blind rivets score higher here: the same 24-month term on both packs, against no stated term on the solid side.

Choose blind rivets if

  • You can reach only one side of the joint.
  • You own a rivet gun that fits a 3/16 in rivet; see rivet gun sizes if you are buying one.
  • You want the fastener to set fast from the front, with no hammering on the back side.
  • A stated 24-month warranty matters to you.

Choose solid rivets if

  • You can reach both sides of the joint to set the rivet.
  • You want a dome head showing on the work, as on the boat rivets here.
  • Your work sits in wet places or on wood, where the listing says these rivets suit.
  • You would rather hammer the rivet than pull a mandrel with a gun.

Before You Strike an Arc

  • Match the rivet diameter and length to the hole and the material stack before ordering.
  • Keep a rivet gun on hand for the blind rivets; the solid rivets set with a hammer and a bucking bar, or with a rivet squeezer.
  • Wear eye protection when setting rivets, and clamp the work so it cannot shift.
  • Check the count and the finish on arrival: 250 and 180 in the blind rivet packs, 150 and 130 in the solid rivet packs.

FAQ for welders

Can blind rivets be installed from one side?

Yes. A blind rivet, also called a pop rivet, sets with a rivet gun from one side only. The steel mandrel pulls through the aluminum body and snaps off, leaving the rivet set in the joint.

What sizes are the blind rivets here?

Both blind rivet packs are 3/16 in diameter. The black pack is 1/2 in long with 250 pieces, and the aluminum pack is 3/4 in long with 180 pieces.

What are solid rivets used for?

The solid rivets here are brazier head aluminum rivets sold as boat rivets. The listing says they suit wood or wet environments, and indoor and outdoor use.

Do these rivets come with a warranty?

The two blind rivet listings state a 24-month warranty. The two solid rivet listings state no warranty term.

How many rivets come in each pack?

The black blind rivets come in a pack of 250, the longer blind rivets in a pack of 180, the small solid rivets in a pack of 150, and the large solid rivets in a pack of 130.

Are these rivets corrosion resistant?

Both makers say so. The blind rivets are described as corrosion and acid resistant, and the solid rivets as premium aluminum with excellent corrosion resistance. No listing names a coating, so the claim rests on the aluminum body the makers describe.

Related: types of blind rivets, how to use blind rivets, types of rivet guns, and the metal fab tools hub.

Scoring, line by line

Each rivet is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Wensilon Blind Rivets 1/2 in 9.7 29 21 21 n/a 3
Wensilon Blind Rivets 3/4 in 9.7 29 21 20 n/a 3
ALLCLEAN Solid Rivets 3/16 in 9.6 28 21 21 n/a 0
ALLCLEAN Solid Rivets 1/4 in 9.6 28 21 20 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides

Metal Fab Tools ·

How to Remove Blind Rivets

Drill out the head, match the bit to the rivet size, and punch out the rest: a step-by-step guide to removing blind rivets without…