Metric vs Sae Tap and Die Set: Which One Should You Buy?
The OMT metric set covers M3 to M12, the EilxMag metric set covers M3 to M16, and the VEVOR SAE set covers 1/4 inch…
Grinders, chop saws, benders and band saws for metal fabrication. We compare rated power, capacity, guards and safety listings.
The OMT metric set covers M3 to M12, the EilxMag metric set covers M3 to M16, and the VEVOR SAE set covers 1/4 inch…
Thin cut off wheels in this guide measure 3/64 inch, 1/16 inch, 0.047 inch and 0.039 inch, and the WORKEASE and SALI listings describe…
Two blind rivet packs and two solid rivet packs, all aluminum, compared on diameter, length, pack size, material and warranty, with a clear answer…
Five aluminum oxide sanding belts for aluminum, compared on belt size, grit range, pack count, joint and backing.
Five grinding wheels for sharpening metal lathe tools, compared on diameter, grit, arbor, abrasive and the speed range each wheel states.
Four punch sets for steel work under 30, compared on sizes, length, steel type and warranty.
Five tube cutter sets under 40, compared on cutting range, blades, bearings and what ships in the box, with every set including a deburring…
Five blind rivet packs compared by diameter, grip length, pack size, material and warranty, from single sizes to a 900-piece kit.
Five tool bags under $75 for welders, compared on size, pockets, carry and warranty from what each listing states.
Ratchet pullers under $100 scored on pull, build, cable and what ships in the box.
| Spec | Why it matters |
|---|---|
| Power and speed | Corded tools list amps and no-load RPM; cordless tools list volts and battery capacity. RPM must stay at or below the rating on any wheel or blade you mount. |
| Wheel, blade or disc size | This sets cutting depth and which consumables fit. Check that the guard supplied covers the largest size the listing allows. |
| Cutting capacity | Round, square and flat stock capacities usually differ, and mitre cuts reduce them. Read each figure and its angle. |
| Guards and switches | Adjustable guards, lock-off switches and brake features matter on tools used in a busy shop. |
| Arbor size and thread | A 5/8-11 arbor or a 7/8 inch hole decides which wheels and flap discs fit without adapters. |
| Included accessories | Wheels, vise jaws or a case change what you must buy before the first cut. |
This category covers grinders, saws, nibblers, notchers and presses, so the numbers that count change from tool to tool. Capacity and speed ratings are the maker statements; we do not measure them, so match each tool to your stock thickness with room to spare.