Best Tube Cutter Set Under 40 (2026): 5 Picks for the Shop
Five tube cutter sets under 40, compared on cutting range, blades, bearings and what ships in the box, with every set including a deburring tool.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallXUNTUI Pipe Cutter Set9.7/10View on Amazon - 2
Best RangeVEVOR 3PCS Tubing Cutter Set9.6/10View on Amazon - 3
Best DeburringGOCHANGE 4-1 Tubing Cutter Set9.6/10View on Amazon - 4
Best Fixed SizesDURATECH 4-Piece Tubing Cutter Set9.5/10View on Amazon
A run of copper for a new line, a repair behind a sink, a short length of thin-wall stainless on the bench. Each one needs a square cut and a clean edge before the fitting goes on, and a hacksaw leaves a ragged end that takes time to clean up. A best tube cutter set under 40 puts the large cutter, the mini cutter and the deburring tool in one box, so the cut and the cleanup stay in the same kit. This guide compares five sets on cutting range, blades, bearings and what ships in the box.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall XUNTUI Pipe Cutter Set: Large cutter 3/16 to 2 inch OD plus a mini cutter, reamer, deburrer, extra wheel and EVA case, at 1.19 pounds. Check price on Amazon
- Best Range VEVOR 3PCS Tubing Cutter Set: Large cutter 3/16 to 2 inch OD with a stated 1/8 inch max cutting thickness, plus a mini cutter and a deburring tool. Check price on Amazon
- Best Deburring GOCHANGE 4-1 Tubing Cutter Set: 6-ball bearing roller system, two deburring tools, and a large cutter rated 1/4 to 2 inch OD. Check price on Amazon
- Best Fixed Sizes DURATECH 4-Piece Tubing Cutter Set: Three C-shaped cutters for 1/2, 3/4 and 1 inch OD, a deburring tool with a spare blade and a storage case. Check price on Amazon
The machines

Pipe Cutter Set, 1/8"-2" OD Tubing Cutter Kit Mini
A tube cutter kit with a large cutter for 3/16 to 2 inch OD, a mini cutter for 1/8 to 7/8 inch OD, a reamer, a deburrer, an extra wheel and an EVA case.
Pros
- Large cutter covers 3/16 to 2 inch OD and fits up to 1-1/2 inch NPS pipe
- Mini cutter handles 1/8 to 7/8 inch OD for tight spaces
- Extra cutting wheel and extra deburring blade in the box
- 6-roller bearing tracking and a non-slip adjustment knob for square cuts
Cons
- Not for 2 inch NPS pipe, despite the 2 inch OD range
- No warranty term is stated
- Materials are limited to copper, brass, aluminum and thin-wall stainless
- Storage is an EVA case rather than a hard case

VEVOR 3PCS Tubing Cutter Set
A 3-piece tubing cutter set with a large cutter for 3/16 to 2 inch OD, a mini cutter for 1/8 to 7/8 inch OD and a deburring tool.
Pros
- Large cutter covers 3/16 to 2 inch OD with a stated 1/8 inch max cutting thickness
- Mini cutter covers 1/8 to 7/8 inch OD
- SKD blade and an aluminum alloy body
- 3 smooth bearings and a soft rubber pad for grip
Cons
- Large cutter max cutting thickness is 1/8 inch
- Mini cutter max cutting thickness is 1/20 inch
- No storage case is included
- At 2.4 pounds it is heavier than the XUNTUI set

4-1 Tubing Cutter Set, Heavy Duty Pipe Cutter
A 4-in-1 tubing cutter set with a large cutter for 1/4 to 2 inch OD, a mini cutter for 1/8 to 7/8 inch OD and two deburring tools.
Pros
- 6-ball bearing roller system for smoother rotation
- Large cutter covers 1/4 to 2 inch OD and the mini covers 1/8 to 7/8 inch OD
- Two deburring tools: a pen-style reamer and a circular deburring tool
- Industrial-grade alloy steel with a reinforced aluminum frame
Cons
- Large cutter starts at 1/4 inch OD, so 3/16 inch pipe needs the mini cutter
- No storage case is included
- No spare cutting wheel is included
- At 2.02 pounds it is heavier than the XUNTUI set

HORUSDY 4-Piece Ultimate Tube Cutter Set
A 4-piece tube cutter set with a heavy duty cutter for 1/4 to 2 inch OD, a mini cutter for 1/8 to 7/8 inch OD, a deburring tool, a reamer and a hard tool case.
Pros
- Main cutter covers 1/4 to 2 inch OD for smooth, square cuts
- Mini cutter covers 1/8 to 7/8 inch OD for tight spaces
- Deburring tool and inner outer reamer for clean pipe ends
- Hard tool case keeps the 4-piece set together
Cons
- Heaviest set in this guide at 2.44 pounds
- No warranty term is stated
- No spare cutting wheel is included
- Large cutter starts at 1/4 inch OD, so 3/16 inch pipe needs the mini cutter

DURATECH 4-Piece Copper Tubing Cutter Set
A 4-piece tubing cutter set with three fixed C-shaped cutters for 1/2, 3/4 and 1 inch OD, a deburring tool and a storage case.
Pros
- Three C-shaped cutters cover 1/2, 3/4 and 1 inch OD
- 9CRSI blades with electroplated rollers
- Deburring tool has an M2 high-speed steel blade plus a spare blade
- Each cutter is stamped with its size for easy identification
Cons
- Fixed sizes only: 1/2, 3/4 and 1 inch OD, with no adjustable cutter
- Largest size is 1 inch OD, so bigger pipe needs another tool
- No spare cutting wheel is included
- At 2.18 pounds it is heavier than the XUNTUI set
Other welders and gear to compare
2 Pack Wire Cutters SetCheck price on Amazon
TCT Hole Saw SetCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Cutting range | Mini cutter | Blade | Deburring | Weight | In the box |
|---|---|---|---|---|---|---|---|
| XUNTUI Pipe Cutter Set | 9.7/10 | 3/16 to 2 in OD | 1/8 to 7/8 in OD | SKD11 wheel | Deburring tool and reamer | 1.19 lb | EVA case, extra wheel, extra blade |
| VEVOR 3PCS Tubing Cutter Set | 9.6/10 | 3/16 to 2 in OD | 1/8 to 7/8 in OD | SKD blade | Deburring tool | 2.4 lb | Large cutter, mini cutter, deburring tool |
| GOCHANGE 4-1 Tubing Cutter Set | 9.6/10 | 1/4 to 2 in OD | 1/8 to 7/8 in OD | Not stated | Pen reamer and circular deburring tool | 2.02 lb | Two deburring tools |
| HORUSDY 4-Piece Tube Cutter Set | 9.6/10 | 1/4 to 2 in OD | 1/8 to 7/8 in OD | Not stated | Deburring tool and inner outer reamer | 2.44 lb | Hard tool case |
| DURATECH 4-Piece Tubing Cutter Set | 9.5/10 | 1/2, 3/4 and 1 in OD | No mini cutter | 9CRSI blades | Deburring tool with spare blade | 2.18 lb | Storage case |
All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026. Where a listing states a figure two ways, the table shows both.
How the sets are scored
Each set is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. A spec the maker does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| XUNTUI Pipe Cutter Set | 9.7 | 32 | 22 | 22 | n/a | 0 |
| VEVOR 3PCS Tubing Cutter Set | 9.6 | 30 | 21 | 21 | n/a | 0 |
| GOCHANGE 4-1 Tubing Cutter Set | 9.6 | 29 | 21 | 20 | n/a | 0 |
| HORUSDY 4-Piece Tube Cutter Set | 9.6 | 28 | 20 | 20 | n/a | 0 |
| DURATECH 4-Piece Tubing Cutter Set | 9.5 | 27 | 20 | 19 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.
What matters in the best tube cutter set under 40
Cutting range
The large cutters in this guide cover 3/16 to 2 inch OD or 1/4 to 2 inch OD, and the mini cutters cover 1/8 to 7/8 inch OD. That range handles copper, PVC and thin-wall stainless in the sizes a home or farm shop cuts most. The DURATECH set works differently: three fixed C-shaped cutters for 1/2, 3/4 and 1 inch OD, with no adjustable cutter for sizes in between. Match the cutter to the pipe on the bench.
Blades and bearings
Blade steel is where these sets part company. VEVOR lists an SKD blade, XUNTUI lists an SKD11 cutting wheel, and DURATECH lists 9CRSI blades with electroplated rollers. Bearings matter just as much: VEVOR lists 3 smooth bearings, GOCHANGE lists a 6-ball bearing roller system, and XUNTUI lists 6-roller bearing tracking that keeps the tube centered while the knob feeds the wheel in.
Deburring and what ships in the box
Every set here includes a deburring tool, and the differences sit in the extras. GOCHANGE includes two deburring tools, a pen-style reamer and a circular deburring tool. XUNTUI adds a pipe reamer, an extra cutting wheel and an extra deburring blade, plus an EVA case. HORUSDY pairs its deburring tool with an inner outer reamer and a hard tool case, and DURATECH adds a storage case with a spare deburring blade in the tail cover.
Weight and size on the bench
Weights run from 1.19 pounds for the XUNTUI set to 2.44 pounds for the HORUSDY set, with VEVOR at 2.4 pounds, DURATECH at 2.18 pounds and GOCHANGE at 2.02 pounds. Each set is a hand tool: a knob feeds the wheel and bearings carry the rotation, with no cord or battery in the box.
Cutting safety. A fresh cut leaves a sharp edge, so wear eye protection, deburr the inside and outside of every cut before the pipe goes into a fitting, and clamp the work so the pipe cannot roll while the cutter turns. Keep fingers clear of the wheel and the deburring blade, and back the wheel off before the set goes back in its case.
Before You Strike an Arc
- Match the cutter to the pipe: the large cutters cover up to 2 inch OD and the mini cutters cover 1/8 to 7/8 inch OD.
- Check the box on arrival: the deburring tool, reamer and spare wheel or blade should all be there before the first cut.
- Deburr the inside and outside of every cut before the pipe goes into a fitting.
- Feed the wheel with the knob a little at a time and let it score the pipe rather than forcing the cut.
- Keep the spare wheel and spare blade with the set, so a dull edge does not stop a job halfway.
FAQ for welders
What size pipe can a tube cutter set under $40 cut?
The large cutters in this guide cover 3/16 to 2 inch OD or 1/4 to 2 inch OD, and the mini cutters cover 1/8 to 7/8 inch OD. DURATECH takes a different route with three fixed cutters for 1/2, 3/4 and 1 inch OD. XUNTUI also notes its large cutter fits up to 1-1/2 inch NPS pipe, and it is not for 2 inch NPS pipe.
Can a tube cutter set cut stainless steel?
Three of the sets in this guide list stainless steel among their materials: VEVOR lists stainless steel, XUNTUI lists thin-wall stainless steel, and DURATECH lists thin steel. VEVOR also states a max cutting thickness of 1/8 inch for its large cutter and 1/20 inch for its mini cutter, so thick-wall stainless needs a different tool. GOCHANGE and HORUSDY list copper, PVC and aluminum instead.
Do these tube cutter sets include a deburring tool?
Yes, every set in this guide includes a deburring tool. GOCHANGE includes two, a pen-style reamer and a circular deburring tool, and XUNTUI adds a pipe reamer and an extra deburring blade. DURATECH includes a spare deburring blade in the tail cover, and HORUSDY pairs its deburring tool with an inner outer reamer. Deburr the inside and outside of each cut so the fitting seats cleanly.
What is the difference between the large cutter and the mini cutter?
The large cutter covers the full range, 3/16 to 2 inch OD or 1/4 to 2 inch OD depending on the set, while the mini cutter covers 1/8 to 7/8 inch OD. The mini cutter is the compact one, built for tight spaces behind sinks, inside engine bays and next to walls where a standard cutter cannot rotate. Use the large cutter for main runs and the mini cutter where space is tight.
Can a tube cutter cut PVC pipe?
Four of the five sets list PVC among their materials: VEVOR, DURATECH, GOCHANGE and HORUSDY. XUNTUI lists copper, brass, aluminum and thin-wall stainless steel instead. Match the set to the pipe on the bench, and deburr plastic pipe the same way as metal so the fitting seals.
Related: best mini tube cutter under 15, tube cutter vs pipe cutter, best tube cutter for aluminum, best large tube cutter, best copper deburring tool.





