Best Tube Cutter for Aluminum (2026)
5 tube cutters for aluminum, compared by cutting range, materials, deburring tools and weight, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDURATECH 1-1/4 Cutter9.7/10View on Amazon - 2
Best Mini PickLIBRATON Mini Cutter9.6/10View on Amazon - 3
Ratcheting PickAGS Ratcheting Cutter9.6/10View on Amazon
An aluminum tube needs a square, burr-free end before it fits a fitting, and a hacksaw leaves a rough edge that needs filing and cleaning. A tubing cutter rolls around the tube and scores a clean line, so the cut stays straight and the fitting seats well. This guide compares the best tube cutter for aluminum, using five cutters and the cutting ranges, materials and extras each listing states, and shows which cutter suits tight spaces, wide tubes, or repair work.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read the affiliate disclosure.
Quick picks
- Best Overall DURATECH 1-1/4 Cutter: Widest range here at 1/8 inch to 1-1/4 inch, with a replacement wheel and a fold-away reamer included. Check price on Amazon
- Best Mini Pick LIBRATON Mini Cutter: Mini cutter for 3/16 inch to 1-1/8 inch, with a deburring tool included for tight spaces. Check price on Amazon
- Ratcheting Pick AGS Ratcheting Cutter: Ratcheting cutter for 1/8 inch to 1-1/8 inch, compatible with SPLICE-LOK and KLEDGE-LOK systems. Check price on Amazon
The machines

DURATECH Tubing Cutter 1/8"-1-1/4"
A tubing cutter for 1/8 inch to 1-1/4 inch outer diameter, for copper, aluminum, brass and plastic tubings, with a replacement wheel and a fold-away reamer.
Pros
- Widest cutting range here, at 1/8 inch to 1-1/4 inch outer diameter
- Replacement wheel and fold-away reamer are included for burr removal
- Ball bearing rollers give a firm grip and help prevent uneven cuts
- Screw feed with a large grip knob allows quick adjustment and strong clamping
Cons
- Weight of 10.6 ounces is the heaviest cutter here
- No warranty term is stated for this listing
- No safety feature is stated for this listing
- Larger body suits bench and shop work more than very tight spaces

LIBRATON Copper Pipe Cutter 3/16"-1-1/8"
A mini tubing cutter for 3/16 inch to 1-1/8 inch outer diameter, for copper, brass, aluminum, thin steel and PVC pipes, with a deburring tool included.
Pros
- Mini size suits small diameter tubes in tight and confined spaces
- Alloy steel blade and alloy steel body suit clean and precise cuts
- Deburring tool is included with the cutter
- Two flare groove rollers support precision cutting
Cons
- No warranty term is stated for this listing
- No safety feature is stated for this listing
- Mini size suits smaller tubes, not the widest range here

DURATECH Mini Tubing Cutter for Tubing
A mini tubing cutter for 1/8 inch to 3/4 inch (3-19mm) outer diameter, for copper, aluminum, brass and thin metal, with a replacement wheel included.
Pros
- Compact size fits comfortably in the palm for one-handed holding
- Extra wheel is included for unexpected situations
- Knurled feed screw knob gives control over cutting pressure
- Two rollers support enhanced cutting precision
Cons
- Cutting range ends at 3/4 inch, narrower than the wider cutters here
- No warranty term is stated for this listing
- No safety feature is stated for this listing
- Small size suits thin tubes, not larger diameter work

AGS XForce Ratcheting Metal Tubing Cutter
A ratcheting metal tubing cutter for 1/8 inch to 1-1/8 inch pipes, for copper, aluminum and stainless steel tubes, compatible with SPLICE-LOK and KLEDGE-LOK systems.
Pros
- Ratcheting action suits fast tube and hose repairs
- Compatible with SPLICE-LOK and KLEDGE-LOK systems
- Stated for A/C aluminum tubing, automotive and HVAC applications
- Stated for fixing pinhole leaks, cracks, kinks and rub-throughs
Cons
- Not suitable for brake or clutch systems, as stated in the listing
- No weight is stated for this listing
- No warranty term is stated for this listing
- No safety feature is stated for this listing

Mini Copper Pipe Cutter Adjustable Tubing Cutter
A mini pipe cutter for 3-22mm outer diameter, for copper, aluminum, brass, metal, plastic and thin stainless steel pipes, with a replaceable hardened steel blade.
Pros
- Mini size of about 40 to 60 mm suits construction sites and tight work
- Hardened steel blade can be disassembled and replaced
- Zinc alloy body is stated as strong with a long service life
- Adjustable design rotates and cuts on pipes from 3-22mm
Cons
- Cutting range in mm is narrower in scope than the inch ranges of the wider cutters here
- No warranty term is stated for this listing
- No safety feature is stated for this listing
- No deburring tool or reamer is stated for this listing
Other welders and gear to compare
HAUTMEC Pro 1/2 Inch Automatic Copper Tube CutterCheck price on Amazon
RIDGID 32985 Model 104 Close Quarters Tubing CutterCheck price on Amazon
RIDGID 31622 Model 150 Constant Swing Tubing CutterCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Cutting Range | Materials | Deburr / Spare | Weight | Warranty |
|---|---|---|---|---|---|---|
| DURATECH 1-1/4 Cutter | 9.7/10 | 1/8 inch to 1-1/4 inch | Copper, aluminum, brass, plastic | Reamer, spare wheel | 10.6 ounces | Not stated |
| LIBRATON Mini Cutter | 9.6/10 | 3/16 inch to 1-1/8 inch | Copper, brass, aluminum, thin steel, PVC | Deburring tool | 8.4 ounces | Not stated |
| DURATECH Mini Cutter | 9.6/10 | 1/8 inch to 3/4 inch | Copper, aluminum, brass, thin metal | Extra wheel | 5.3 ounces | Not stated |
| AGS Ratcheting Cutter | 9.6/10 | 1/8 inch to 1-1/8 inch | Copper, aluminum, stainless steel | Not stated | Not stated | Not stated |
| LapangZi Mini Cutter | 9.6/10 | 3-22mm | Copper, aluminum, brass, metal, plastic | Replaceable blade | 3.52 ounces | Not stated |
Specifications are manufacturer stated, as published on each listing and collected 28 October 2026.
Choosing the best tube cutter for aluminum
Cutting range decides whether a cutter fits the tube at hand. The DURATECH large cutter covers 1/8 inch to 1-1/4 inch, the widest range here. The LIBRATON mini cutter and the AGS ratcheting cutter cover to 1-1/8 inch, from 3/16 inch and 1/8 inch respectively. The DURATECH mini cutter covers 1/8 inch to 3/4 inch, and the LapangZi mini cutter covers 3-22mm. Match the range to the largest aluminum tube in the job before choosing, since a cutter cannot cut beyond its stated range.
All five listings state aluminum among the materials they cut, so material alone does not separate them. The DURATECH large cutter states copper, aluminum, brass and plastic. LIBRATON states copper, brass, aluminum, thin steel and PVC. The DURATECH mini cutter states copper, aluminum, brass and thin metal, with PVC, hard plastic and acrylic also named. The AGS cutter states copper, aluminum and stainless steel. LapangZi states copper, aluminum, brass, metal, plastic and thin stainless steel. Check the material list for the tube in the job, especially for thin steel or plastic work alongside aluminum.
Deburring and spare wheels
A clean cut still needs a burr-free edge before fitting. The LIBRATON cutter includes a deburring tool, and the DURATECH large cutter includes a fold-away reamer stored in the frame for burr removal. The DURATECH large cutter and the DURATECH mini cutter each include a spare or extra wheel, and LapangZi states a blade that can be disassembled and replaced. The AGS cutter states no deburring tool, reamer or spare wheel, so a separate deburring step needs planning for repair work.
Tight spaces and repair work
Mini cutters suit tight spaces, while ratcheting cutters suit repair work. LIBRATON states a mini design for small diameter tubes in restricted spaces, such as air conditioner installation and vehicle repair. The DURATECH mini cutter fits in the palm for one-handed holding. LapangZi states a mini size for construction sites, HVAC, plumbing and garage shops. The AGS ratcheting cutter suits fast tube and hose repairs, including pinhole leaks, cracks, kinks and rub-throughs, but the listing states it is not suitable for brake or clutch systems.
Before You Strike an Arc
- Check the range. Confirm the tube outer diameter fits within the stated cutting range before cutting.
- Check the material. Confirm aluminum is named in the listing, and check any other material in the job against the stated list.
- Check the burr step. Note whether a deburring tool, reamer or spare wheel is included, or plan a separate deburring step.
- Check the fit. For tight spaces, choose a mini cutter; for repair work, check ratcheting action and system compatibility.
- Check the limits. Note any stated exclusion, such as brake or clutch systems for the AGS cutter, before starting a job.
FAQ for welders
What size tube cutter do I need for aluminum?
Match the cutter range to the tube outer diameter. The ranges here run from 1/8 inch to 1-1/4 inch on the widest cutter, to 3-22mm on the LapangZi mini cutter. Measure the tube before choosing, and choose a cutter whose stated range covers the largest tube in the job.
Can these cutters cut materials besides aluminum?
Yes, according to the listings, with the material list differing by cutter. Copper and brass are named by all five listings, with thin steel, stainless steel, PVC and plastic named by some. Check the material list for each cutter against the tube material in the job before cutting.
Do I need to deburr after cutting aluminum tube?
A burr-free edge helps a fitting seat well, so plan a deburring step. The LIBRATON cutter includes a deburring tool, and the DURATECH large cutter includes a fold-away reamer for burr removal. Cutters without a stated deburring tool or reamer need a separate deburring step.
Are mini tube cutters good for tight spaces?
Mini cutters suit tight spaces, according to the listings. LIBRATON states a mini design for small diameter tubes in restricted spaces, and the DURATECH mini cutter fits in the palm for one-handed holding. LapangZi states a mini size for construction, HVAC and garage shops. For larger tubes, a wider cutter suits the job better.
Can a tube cutter be used on brake lines?
Not every cutter here suits that job. The AGS listing states its cutter is not suitable for brake or clutch systems, so check the stated limits for the cutter chosen before any brake work. The other listings do not state brake use, so do not assume a general tube cutter suits brake lines.
Related: best mini tube cutter, best large tube cutter, tube cutter vs pipe cutter and the metal fab tools hub. Also see best tube cutter set.
Scoring, line by line
Each cutter is scored on performance, build, value, safety and warranty. No listing here states a safety feature or a warranty term, so every cutter scores zero on those two criteria, and the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DURATECH 1-1/4 Cutter | 9.7 | 32 | 22 | 21 | n/a | 0 |
| LIBRATON Mini Cutter | 9.6 | 30 | 21 | 21 | n/a | 0 |
| DURATECH Mini Cutter | 9.6 | 28 | 21 | 21 | n/a | 0 |
| AGS Ratcheting Cutter | 9.6 | 29 | 20 | 20 | n/a | 0 |
| LapangZi Mini Cutter | 9.6 | 28 | 20 | 20 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.






