Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Mini Tube Cutter Under $15 (2026)

5 mini tube cutters compared by cut range, materials, body, spare wheel, reamer and warranty, for copper, brass and aluminum tubing.

Best Mini Tube Cutter Under $15 (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Edward Harden ProBest OverallEdward Harden Pro9.7/10View on Amazon
  2. 2Aoerzn TC0609Best With ReamerAoerzn TC06099.6/10View on Amazon
  3. 3DOMINOX JJ1322Best for Tight SpacesDOMINOX JJ13229.6/10View on Amazon
  4. 4AutoViteX 2-PackBest 2-PackAutoViteX 2-Pack9.5/10View on Amazon

A brake line needs a short piece cut out, the copper line for the fridge water feed is a touch long, and a hacksaw leaves a ragged edge that will not seal. The best mini tube cutter under 15 rolls around the tube and leaves a clean, square edge, so the cut stays square and the fitting seats right.

This guide compares 5 mini tube cutters by cut range, materials, body, spare wheel, reamer and warranty, for copper, brass, aluminum and plastic tubing.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Edward Harden Pro: 1/8 to 7/8 in cut range on copper, aluminum, brass and plastic, with a lifetime warranty. Check price on Amazon
  • Best With Reamer Aoerzn TC0609: Fold-away reamer and spare wheel, 1 year warranty, for brass, copper, plastic and aluminum. Check price on Amazon
  • Best for Tight Spaces DOMINOX JJ1322: Mini C-style body for 1/8 to 7/8 in tubing, with grooved rollers and a knurled knob. Check price on Amazon
  • Best 2-Pack AutoViteX 2-Pack: 2 cutters for 1/8 to 5/8 in soft metal tubing at 0.18 lb each. Check price on Amazon

The machines

Edward Tools Harden Pro Mini Pipe Cutter 1/8”

Edward Tools Harden Pro Mini Pipe Cutter 1/8”

Edward Tools9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A mini pipe cutter for 1/8 to 7/8 in copper, aluminum, brass and plastic tubing, with a heavy duty steel blade and a lifetime warranty.

Pros

  • Cuts 1/8 to 7/8 in copper, aluminum, brass and plastic
  • Heavy duty steel blade
  • Lifetime warranty
  • Also cuts brake lines, fuel lines and arrows per the listing

Cons

  • No spare wheel stated
  • No reamer stated
  • No safety listing stated
  • No weight stated
Aoerzn Premium Tubing Cutter 1/8"-1-1/4"

Aoerzn Premium Tubing Cutter 1/8"-1-1/4"

Aoerzn9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A tubing cutter with a fold-away reamer and a spare wheel, for 1/8 to 1-1/4 in brass, copper, plastic and aluminum tubing, with a 1 year manufacturer warranty.

Pros

  • Fold-away reamer removes burrs after the cut
  • Spare replacement wheel stored inside the tool
  • 1 year manufacturer warranty
  • Large grip knob with screw feed for stable cutting

Cons

  • No safety listing stated
  • No weight stated
  • Listing has spelling slips in its bullets
DOMINOX Mini Tube Cutter

DOMINOX Mini Tube Cutter

DOMINOX9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A mini C-style tube cutter for 1/8 to 7/8 in soft copper, brass, aluminum and thin-wall stainless steel, with a zinc alloy body, grooved rollers and a knurled knob.

Pros

  • Cuts thin-wall stainless steel under 0.1 in wall thickness
  • Zinc alloy body, durable yet lightweight per the listing
  • Grooved rollers keep the tubing steady
  • Knurled knob for smooth, controlled cutting pressure

Cons

  • No warranty term stated
  • No safety listing stated
  • No spare wheel stated
  • No reamer stated
DURATECH Mini Tubing Cutter for Tubing with 3/16"

DURATECH Mini Tubing Cutter for Tubing with 3/16"

DURATECH9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact tubing cutter for 3/16 to 1-1/8 in copper, brass, aluminum, PVC, hard plastic and acrylic, with a high toughness steel body, 2 rollers and an extra wheel.

Pros

  • Extra wheel included for unexpected situations
  • High toughness steel body
  • 2 rollers for cutting precision
  • Knurled feed screw knob for cutting pressure control

Cons

  • Narrowest low end here at 3/16 in
  • No warranty term stated
  • No safety listing stated
  • No reamer stated
AutoViteX 2 Pack Tubing Cutter

AutoViteX 2 Pack Tubing Cutter

AutoViteX9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of mini tubing cutters for 1/8 to 5/8 in soft copper, brass and aluminum tubing, with a rust-resistant cutting wheel, ball-bearing rollers, at 0.18 lb.

Pros

  • 2 cutters in the pack, a handy backup
  • 0.18 lb, pocket-sized and light
  • Rust-resistant, wear-resistant cutting wheel
  • Ball-bearing rollers for clean, burr-free cuts

Cons

  • Smallest cut range here at 1/8 to 5/8 in
  • Soft metals only, no stainless steel stated
  • No warranty term stated
  • No safety listing stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Cut range Materials Body Spare wheel Reamer Warranty
Edward Harden Pro 9.7/10 1/8 to 7/8 in Copper, aluminum, brass, plastic Heavy duty steel Not stated Not stated Lifetime
Aoerzn TC0609 9.6/10 1/8 to 1-1/4 in (bullets say 1-5/16 in) Brass, copper, plastic, aluminum Not stated Yes Yes 1 year
DOMINOX JJ1322 9.6/10 1/8 to 7/8 in Soft copper, brass, aluminum, thin-wall stainless Zinc alloy Not stated Not stated Not stated
DURATECH DTTC01S02 9.5/10 3/16 to 1-1/8 in Copper, brass, aluminum, PVC, hard plastic, acrylic High toughness steel Yes Not stated Not stated
AutoViteX 2-Pack 9.5/10 1/8 to 5/8 in Copper, brass, aluminum High-grade steel Not stated Not stated Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 11 November 2026. Where a listing states a figure two ways, the table shows the 2 figures.

What the listings tell you

We read 5 mini tube cutter listings. All 5 cut copper, brass and aluminum, 3 cut plastic, and 2 include a spare wheel. Cut ranges run from 1/8 to 5/8 in on the smallest cutter to 1/8 to 1-1/4 in on the largest. 2 state a warranty term and none states a safety listing.

Buying guide: best mini tube cutter under 15

Cut range

Match the cutter to the tube: the AutoViteX 2-pack cuts 1/8 to 5/8 in, the Edward and DOMINOX cutters cut 1/8 to 7/8 in, the DURATECH cuts 3/16 to 1-1/8 in, and the Aoerzn title states 1/8 to 1-1/4 in. A cutter that tops out below the tube will not close around it, so check the largest tube on the job first.

Materials

All 5 cut copper, brass and aluminum. 3 cut plastic: the Edward, Aoerzn and DURATECH cutters. The DOMINOX cutter also handles thin-wall stainless steel with a wall thickness under 0.1 in. Match the cutter to the metal: soft copper cuts easily, while stainless needs a thin wall and a steady hand.

Body and grip

Bodies here are steel, zinc alloy and high-grade steel. The DOMINOX body is zinc alloy, the DURATECH body is high toughness steel, and the AutoViteX cutter is high-grade steel at 0.18 lb. Knurled knobs show up on the DOMINOX and DURATECH cutters for controlled feed pressure, and the Aoerzn cutter uses a large grip knob with a screw feed.

Spare wheel and reamer

A spare wheel keeps the job going when the edge dulls: the Aoerzn cutter stores a replacement wheel inside the tool, and the DURATECH cutter includes an extra wheel. Only the Aoerzn cutter includes a reamer, a fold-away tool that removes burrs after the cut. The DOMINOX cutter ships with 1 pre-installed wheel, ready to use out of the box.

Wall thickness and tight spaces

Mini cutters suit small-diameter tube in tight spaces: the Edward, DOMINOX and AutoViteX listings all name tight spaces. The DOMINOX listing limits stainless steel to a wall thickness under 0.1 in. Rollers matter here: the DOMINOX cutter has grooved rollers, the DURATECH cutter has 2 rollers, and the AutoViteX cutter has ball-bearing rollers, all to keep the tube steady while the cutter turns.

Cutting safety. A tube cutter wheel is sharp, and a fresh cut leaves a burr that can slice a finger. Wear gloves and eye protection, keep fingers clear of the wheel, and ream the burr off the cut end before fitting the tube.

Before You Strike an Arc

  • Check the tube diameter against the cutter range: 1/8 to 5/8 in on the AutoViteX 2-pack, 1/8 to 7/8 in on the Edward and DOMINOX cutters, 3/16 to 1-1/8 in on the DURATECH, and 1/8 to 1-1/4 in on the Aoerzn title.
  • Check the wall thickness on stainless steel: the DOMINOX cutter states a wall thickness under 0.1 in.
  • Check the spare wheel on arrival: the Aoerzn cutter stores its replacement wheel inside the tool, and the DURATECH cutter includes an extra wheel.
  • Check the reamer on the Aoerzn cutter: it folds away in the frame and removes burrs after the cut.
  • No power is needed: every cutter here works by hand.

FAQ for welders

What size tube can a mini tube cutter cut?

Cut ranges here run from 1/8 to 5/8 in to 1/8 to 1-1/4 in. The AutoViteX 2-pack cuts 1/8 to 5/8 in, the Edward and DOMINOX cutters cut 1/8 to 7/8 in, the DURATECH cuts 3/16 to 1-1/8 in, and the Aoerzn title states 1/8 to 1-1/4 in. Measure the tube outside diameter before buying.

Can a mini tube cutter cut stainless steel?

Only the DOMINOX cutter here names thin-wall stainless steel, with a wall thickness under 0.1 in. The other cutters name copper, brass, aluminum and plastic. Check the wall thickness and the materials the listing names.

What is the reamer on a tube cutter for?

The reamer removes the burr left inside the tube end after the cut. The Aoerzn cutter includes a fold-away reamer in the frame. A clean, burr-free end seats better in the fitting.

How do you use a mini tube cutter?

Clamp the cutter on the tube, tighten the knob, and rotate the cutter around the tube, tightening a little more with each full rotation until the tube is cut through. The DOMINOX and DURATECH listings describe the same steps: rotate, tighten, repeat. Keep the cutter steady so the cut stays square.

Do mini tube cutters come with a spare wheel?

2 here do: the Aoerzn cutter stores a replacement wheel inside the tool, and the DURATECH cutter includes an extra wheel. The DOMINOX cutter ships with 1 pre-installed wheel. A spare wheel matters when the edge dulls mid-job.

Related: tube cutter vs pipe cutter, deburring tool vs metal file, steel pipe cutter vs hacksaw and pipe bender vs tube bender. Also see our metal fab tools hub and how to use a tube bender.

Scoring, line by line

Each cutter is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None states a safety listing, so all score zero on safety. 2 state a warranty term, so 2 earn warranty points.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Edward Harden Pro 9.7 30 21 20 n/a 3
Aoerzn TC0609 9.6 29 20 20 n/a 2
DOMINOX JJ1322 9.6 30 21 20 n/a 0
DURATECH DTTC01S02 9.5 29 20 19 n/a 0
AutoViteX 2-Pack 9.5 28 19 20 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides

Metal Fab Tools ·

Best Mini Tube Cutter (2026): 5 Compared

Five mini tube cutters compared: two RIDGID close-quarters cutters with lifetime warranties and three compact cutters for 1/8 to 1-1/8 inch tube.