Welding Cap vs Bandana: Which One Should You Buy?
Both listings supplied are ARCCAPTAIN reversible welding caps, so the cap side is scored on fabric and fit while the bandana side has no…
Gloves, jackets, respirators and other protective gear for welding and cutting. We look for the protective ratings each product actually states.
Both listings supplied are ARCCAPTAIN reversible welding caps, so the cap side is scored on fabric and fit while the bandana side has no…
CAT 2 flame resistant shirts in 5.5oz to 7.0oz cotton, with arc ratings to 9.5 cal/cm2, compared by fabric, hi-vis trim and wash life.
The best welding knee pads under $35 compared on cushion, shell or cap, straps, weight, size and warranty.
Five welding blankets under $50 compared by size, heat rating, fabric weight, grommets and warranty, from 4x6 ft fiberglass to 10x10 ft coverage.
Five ABC and ABCK fire extinguishers for a welding shop, compared on fire classes, rating, unit weight, pack size, discharge range and warranty.
An ear plugs size chart that maps XS, S, M and L tips and foam plugs to shop noise, with the stated SNR figures…
Safety glass goggles seal out dust, splash and flying chips where open safety glasses leave gaps, and this guide shows how to pick a…
A welding hat size chart turns a head measurement into the size to order, and this guide shows how to measure, read the chart,…
TIG, MIG and stick gloves differ in leather, cuff and lining, and this guide shows how each style fits its process and how to…
Welding gloves price comes down to leather, lining, stitching, cuff length, certification and pack size, and this guide shows what each of those buys…
| Spec | Why it matters |
|---|---|
| Material | Leather gloves and jackets resist spatter and heat. Cotton blends need flame-resistant treatment, so look for that wording. |
| Stated rating or standard | Only claim protection a listing supports. Gloves, aprons and curtains each have their own standards and none cover every hazard. |
| Cuff and sleeve length | Longer cuffs protect forearms during overhead work. Shorter ones leave more dexterity for TIG. |
| Lining and stitching | Kevlar thread and heat-resistant linings last longer near hot work than plain cotton thread. |
| Size chart | Gear that is too large wrinkles at the wrist and catches sparks. Use the maker size chart, not your usual size. |
| Care and replacement | Leather stiffens after heavy heat exposure and seams eventually open. Listings that name replaceable liners or spare parts help. |
Protective gear works only when it is the right type for the process. A glove that suits stick can be too stiff for TIG. Read what each listing says it protects against and treat anything unstated as unprotected. Respirators, curtains and blankets follow different standards again, which is why our guides name the stated rating for each product and leave blanks where a maker is silent.