Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Welding Cap vs Bandana: Which One Should You Buy?

Both listings supplied are ARCCAPTAIN reversible welding caps, so the cap side is scored on fabric and fit while the bandana side has no listing to score.

Welding Cap vs Bandana: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ARCCAPTAIN Reversible FR Cotton Welding CapARCCAPTAIN Reversible FR Cotton Welding Cap9.6/10View on Amazon
  2. 2ARCCAPTAIN Reversible Welding CapARCCAPTAIN Reversible Welding Cap9.6/10View on Amazon

This guide covers welding cap vs bandana. Verdict. Pick the welding cap side. No bandana listing was supplied, so the bandana side cannot be scored on fabric, fit or size, and both listings here are ARCCAPTAIN reversible welding caps. Between the two caps, the Skull cap in size 7 3/8 scores a little higher for its named sweatband and FR cotton, while the Khaki cap in size 7 1/4 is the same model in a different color and size, with fireproof cotton named instead of FR cotton.

Sparks fall from overhead work and heat rises from the puddle, and the top of the head sits close to both. The welding cap vs bandana question is a choice a welder makes before the hood goes on, and it turns on fit under a helmet and fabric that stands up to hot work. Both listings supplied here are welding caps, and no bandana listing was supplied, so the cap side carries the comparison and the bandana side is left without a listing to score.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The two caps

ARCCAPTAIN Reversible FR Cotton Welding Cap

ARCCAPTAIN Reversible FR Cotton Welding Cap

ARCCAPTAIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A reversible 8-panel welding cap in Skull, made from 10 oz FR cotton with a heat-resistant cotton lining and a sweatband, sized 7 3/8.

Pros

  • Reversible 8-panel fit, worn front or back for breathability
  • 10 oz FR cotton with a heat-resistant cotton lining
  • Sweatband and sweat-absorbing cotton on the brim and bill
  • Machine washable and hand washable for repeated use

Cons

  • No warranty term is stated
  • Only size 7 3/8 is in this listing, so another size needs another listing
  • A fitted cap needs the right size, since each listing covers one size only
  • The cap is a liner under a helmet, not eye protection on its own
ARCCAPTAIN Reversible Welding Cap

ARCCAPTAIN Reversible Welding Cap

ARCCAPTAIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A reversible 8-panel welding cap in Khaki, made from 10 oz fireproof cotton with a 100% cotton lining, sized 7 1/4.

Pros

  • 10 oz fireproof cotton with a 100% cotton lining
  • Reversible design, worn front or back
  • Sweat-absorbing cotton on the brim and bill keeps sweat from the eyes
  • Machine washable and hand washable

Cons

  • No warranty term is stated
  • Only size 7 1/4 is in this listing, so another size needs another listing
  • A fitted cap needs the right size, since each listing covers one size only
  • No safety certification is stated in the listing

Side by side

ARCCAPTAIN Reversible FR Cotton Welding Cap Skull ARCCAPTAIN Reversible Welding Cap Khaki Bandana side
Gear Score 58 56 Not scored
Fabric 10 oz FR cotton, 260 grams Martin Cloth, 100% cotton lining 10 oz fireproof cotton, 260 grams Martin Cloth, 100% cotton lining No listing supplied
Panels 8-Panel 8 Panel No listing supplied
Sizes offered 10 sizes, 6-7/8 to 8 10 sizes, 6-7/8 to 8 No listing supplied
Size in this listing 7 3/8 7 1/4 No listing supplied
Color Skull Khaki No listing supplied
Lining Heat-resistant cotton Heat-resistant cotton No listing supplied
Care Machine washable and hand washable Machine washable and hand washable No listing supplied
Warranty Not stated Not stated No listing supplied

Ratings in this table are the makers’ own claims taken from each product page (21 November 2026). Neither listing states a safety certification or a warranty term.

Welding Cap vs Bandana Under a Helmet

A welding cap is made to sit under a welding helmet, and both listings here describe the cap as a liner for a welding helmet that can also be worn on its own. That fitted shape is the cap side’s main point in this comparison. The bandana side has no listing here to show how it would fit, what fabric it uses, or what sizes it comes in, so for work under a helmet the cap side is the only side with stated facts behind it.

Fabric and lining

Both caps use the same fabric story. The maker lists 260 grams of Martin Cloth with a 100 percent cotton lining, and calls the cloth nearly 2.5 times thicker than a regular welding beanie. The Khaki cap is listed as 10 oz fireproof cotton, and the Skull cap as 10 oz FR cotton, each with a heat-resistant cotton lining and sweat-absorbing cotton on the brim and bill. Neither listing gives a flame rating beyond the fabric names, so the fabric comparison rests on cloth weight and lining, and both caps state the same cloth weight and lining figures.

Fit and sizes

Both caps are 8-panel caps, and the maker lists 10 sizes from 6-7/8 to 8, so a buyer picks a size rather than a one-size fit. The Khaki listing is size 7 1/4, and the Skull listing is size 7 3/8, and size and color are the main differences between the two listings, apart from the fabric name and the named sweatband on the Skull cap. Check the size in the listing against the head before ordering, since each listing covers one size only.

Reversible design

Both caps are reversible, with a double-sided design that can be worn front and back. The maker lists that design for breathability and comfort during extended wear, and lists the caps as machine washable and hand washable. See the best welding caps roundup for more reversible caps in the same style.

What the listings leave unclear

Neither listing states a warranty term or a safety certification, so neither cap earns points for warranty or for a stated standard. The maker gives no spark rating beyond the fabric names, and no care figure beyond machine washable and hand washable. The bandana side has no listing at all, so no fabric, size or care figure can be given for it.

Choose the Skull cap if

  • Size 7 3/8 is the size that fits.
  • The Skull color suits the shop kit.
  • A named sweatband matters for long sessions under a helmet.
  • FR cotton is the fabric name wanted on the listing.

Choose the Khaki cap if

  • Size 7 1/4 is the size that fits.
  • The Khaki color suits the shop kit.
  • Fireproof cotton is the fabric name wanted on the listing.
  • The same 8-panel reversible cap is wanted in Khaki.

How the caps scored

Both caps are scored on performance, build, value, safety listing and warranty. Neither earns safety or warranty points, since neither listing states a certification or a warranty term, so the gap between them comes from the named sweatband and FR cotton on the Skull cap.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
ARCCAPTAIN Reversible FR Cotton Welding Cap Skull 9.6 29 21 20 n/a 0
ARCCAPTAIN Reversible Welding Cap Khaki 9.6 28 20 20 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

Before You Strike an Arc

  • Check the size in the listing against the head before ordering, since each listing covers one size only.
  • Try the cap under the welding helmet and set the brim so it sits clear of the eyes.
  • Set the sweatband so sweat stays clear of the eyes during long sessions.
  • Keep the welding helmet on for arc work, since the cap is a liner and not eye protection.
  • Wash the cap as the maker directs after hot work, by machine or by hand.

FAQ for welders

What size welding cap should a welder choose?

The maker lists 10 sizes from 6-7/8 to 8 for these caps. Pick the size that matches the head, since each listing covers one size only, with the Khaki cap at 7 1/4 and the Skull cap at 7 3/8.

Can a welding cap be worn under a welding helmet?

Yes, both listings describe the cap as a liner for a welding helmet, and also say it can be worn on its own. The 8-panel fitted shape is made to sit under a hood.

Is a bandana a good substitute for a welding cap?

No bandana listing was supplied here, so no bandana can be scored on fabric, fit or size from the listings in this article. The welding cap side is the only side with stated fabric, sizes and care.

How should a welding cap be washed?

Both listings say the caps are machine washable and hand washable. Wash the cap after hot work to keep the cotton lining and the sweat-absorbing brim in good shape.

What fabric do these welding caps use?

Both caps list 260 grams of Martin Cloth with a 100 percent cotton lining, at 10 oz. The Khaki cap lists fireproof cotton and the Skull cap lists FR cotton, each with a heat-resistant cotton lining.

Related: best welding caps, welding cap vs hard hat, and the welding safety gear checklist for beginners.

More buying guides