Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Flame Resistant Shirt Under $35 for Welders

CAT 2 flame resistant shirts in 5.5oz to 7.0oz cotton, with arc ratings to 9.5 cal/cm2, compared by fabric, hi-vis trim and wash life.

Best Flame Resistant Shirt Under $35 for Welders
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BOCOMAL FR Crew TeeBest OverallBOCOMAL FR Crew Tee9.6/10View on Amazon
  2. 2SRsafety Hi-Vis ShirtBest Hi-VisSRsafety Hi-Vis Shirt9.6/10View on Amazon
  3. 3BOCOMAL FR HenleyBest LightweightBOCOMAL FR Henley9.5/10View on Amazon
  4. 4KONRECO Hi-Vis FR TeeBest Hi-Vis ValueKONRECO Hi-Vis FR Tee9.6/10View on Amazon

Spatter finds every gap in a shirt, so a welder wants flame resistant fabric that holds up to the arc without weighing down the day. A CAT 2 shirt adds an arc-rated layer between the bead and the skin, and the right one fits the shop, the season and the work. This guide covers the best flame resistant shirt under 35, ranked by arc rating, fabric, hi-vis trim and wash life.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall BOCOMAL FR Crew Tee: 6oz cotton jersey, CAT 2 with a 9.5 cal/cm2 arc rating, chest pocket and up to 100 washes. Check price on Amazon
  • Best Hi-Vis SRsafety Hi-Vis Shirt: 7.0oz cotton with 2-inch reflective strips, a 9.3 cal/cm2 arc rating and sizes from S to 6XL. Check price on Amazon
  • Best Lightweight BOCOMAL FR Henley: 5.5oz cotton knit henley, CAT 2 with an 8 cal/cm2 arc rating, relaxed fit and a chest pocket. Check price on Amazon
  • Best Hi-Vis Value KONRECO Hi-Vis FR Tee: 6oz cotton jersey with reflective trim, a 9.5 cal/cm2 arc rating and up to 100 washes. Check price on Amazon

The machines

BOCOMAL FR Shirts for Men Melt Pocket Midweight

BOCOMAL FR Shirts for Men Melt Pocket Midweight

BOCOMAL9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6oz cotton jersey crew shirt, CAT 2 with a 9.5 cal/cm2 arc rating, chest pocket and up to 100 washes.

Pros

  • Highest arc rating here at 9.5 cal/cm2
  • Up to 100 washes of FR protection
  • Chest pocket and flexible rib cuffs
  • Prewashed and preshrunk, wrinkle-free

Cons

  • Warranty term is not stated on the listing
  • No hi-vis trim or reflective strips
  • No collar, so less neck coverage than a henley
  • 6oz fabric is heavier than the 5.5oz henley here
KONRECO FR Tee Shirts for Men Hi-Vis 6oz Long

KONRECO FR Tee Shirts for Men Hi-Vis 6oz Long

KONRECO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6oz cotton jersey hi-vis shirt, CAT 2 with a 9.5 cal/cm2 arc rating, reflective trim and up to 100 washes.

Pros

  • Ties the highest arc rating here at 9.5 cal/cm2
  • 2-inch reflective trim on back and arm
  • Up to 100 washes of FR protection
  • Prewashed and preshrunk, wrinkle-free

Cons

  • No chest pocket for small tools
  • Warranty term is not stated on the listing
  • 6oz fabric is heavier than the 5.5oz henley here
  • No collar or buttons for venting
SRsafety Hi Vis FR Shirts for Men 7.0oz Flame

SRsafety Hi Vis FR Shirts for Men 7.0oz Flame

SRsafety9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

7.0oz cotton hi-vis shirt, CAT 2 with a 9.3 cal/cm2 arc rating, 2-inch reflective strips and sizes from S to 6XL.

Pros

  • Widest size range here, S to 6XL
  • 2-inch reflective strips on shoulders, waist, arms and back
  • Lists UL, ANSI/ISEA, NFPA and CAT 2 standards
  • Heaviest fabric here at 7.0oz

Cons

  • 7.0oz fabric runs warmer than the lighter shirts
  • No wash life is stated, unlike the 100-wash shirts here
  • No chest pocket for small tools
  • Hand-measured dimensions, so allow some error in sizing
TICOMELA FR Flame Resistant T-Shirts 6oz

TICOMELA FR Flame Resistant T-Shirts 6oz

TICOMELA9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6oz flame-resistant fabric shirt, CAT 2 with an 8.9 cal/cm2 arc rating, reflective tape and 360° visibility.

Pros

  • Reflective tape gives 360° visibility
  • Lightweight 6oz fabric, breathable for all-day wear
  • Heat-sealed reflective trim stands up to laundering
  • NFPA 2112 and ASTM F1506, classified by UL

Cons

  • 8.9 cal/cm2 arc rating is lower than the 9.5 shirts here
  • No wash life is stated
  • No chest pocket for small tools
  • No weight is stated on the listing
BOCOMAL FR Shirts Long Sleeve Henley 5.5oz

BOCOMAL FR Shirts Long Sleeve Henley 5.5oz

BOCOMAL9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

5.5oz cotton knit henley, CAT 2 with an 8 cal/cm2 arc rating, chest pocket, rib-knit cuffs and a relaxed fit.

Pros

  • Lowest fabric weight here at 5.5oz
  • Henley buttons and rib-knit cuffs
  • Chest pocket and clear FR tag
  • Prewashed, preshrunk and wrinkle-free

Cons

  • Lowest arc rating here at 8 cal/cm2
  • 50-wash life is shorter than the 100-wash shirts here
  • Sizing runs big and tall, so check the fit before ordering
  • No hi-vis trim or reflective strips

Other welders and gear to compare

Spec sheet comparison

Shirt Gear Score Fabric Arc rating Hi-vis Wash life
BOCOMAL FR Crew Tee 9.6/10 6oz cotton jersey 9.5 cal/cm2 Not stated Up to 100 washes
KONRECO Hi-Vis FR Tee 9.6/10 6oz cotton jersey 9.5 cal/cm2 Reflective trim Up to 100 washes
SRsafety Hi-Vis Shirt 9.6/10 7.0oz cotton 9.3 cal/cm2 2-inch reflective strips Not stated
TICOMELA FR Tee 9.5/10 6oz flame-resistant fabric 8.9 cal/cm2 Reflective tape Not stated
BOCOMAL FR Henley 9.5/10 5.5oz cotton knit 8 cal/cm2 Not stated Up to 50 washes

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 20 November 2026.

Best flame resistant shirt under 35: how to choose

Start with the arc rating. The shirts here are CAT 2 with arc ratings from 8 to 9.5 cal/cm2, so the rating tells you how much arc energy the fabric is rated to block. The BOCOMAL crew and the KONRECO hi-vis tie at 9.5 cal/cm2, the SRsafety hi-vis follows at 9.3 cal/cm2, the TICOMELA at 8.9 cal/cm2 and the BOCOMAL henley at 8 cal/cm2. Match the rating to the work, then check the fabric weight.

Fabric weight sets comfort. The henley is 5.5oz cotton knit, the lowest weight here, while the SRsafety is 7.0oz cotton, the highest weight here. The 6oz shirts sit between the two, with the BOCOMAL crew and the KONRECO hi-vis in cotton jersey and the TICOMELA in a 6oz flame-resistant fabric. Lighter fabric breathes better on a hot day; heavier fabric feels sturdier at the bench.

Hi-vis trim matters on a shared shop floor or a roadside job. The SRsafety shirt carries 2-inch reflective strips on the shoulders, waist, arms and back, the KONRECO has 2-inch reflective trim on the back and arm, and the TICOMELA has reflective tape for 360° visibility. The BOCOMAL crew and henley have no reflective trim, so they suit a closed shop better than a dark site.

Buying guide: FR shirts for welders

Arc rating and CAT 2

CAT 2 is the arc rating class on every shirt here, tied to the NFPA 2112 standard and ASTM F1506. The arc rating in cal/cm2 is the maker stated figure for the fabric, so a higher figure means more protection. The listings here range from 8 to 9.5 cal/cm2. Check the rating against the arc flash risk of the job, and wear the shirt with the rest of the PPE the job calls for.

Fabric weight

Fabric weight is given in ounces, and the shirts here run from 5.5oz to 7.0oz. The 5.5oz henley is the lowest weight here and the easiest to wear all day, while the 7.0oz SRsafety is the highest weight here and feels the sturdiest. The 6oz shirts balance the two. The shirts here are cotton or cotton jersey, except the TICOMELA, which the maker calls a flame-resistant fabric blend.

Hi-vis trim

Reflective trim is for low-light work. The SRsafety shirt has 2-inch reflective strips on the shoulders, waist, arms and back. The KONRECO shirt has 2-inch flame resistant silver heat seal reflective trim on the back and arm. The TICOMELA shirt has reflective tape for 360° visibility. The BOCOMAL crew and henley have no reflective trim, so they are shop shirts rather than roadside shirts.

Wash life and care

FR treatment wears off with washing, so the wash count matters. The BOCOMAL crew and the KONRECO shirt hold FR protection for up to 100 washes, while the BOCOMAL henley holds it for up to 50 washes. The SRsafety and TICOMELA shirts state no wash count. The BOCOMAL and KONRECO shirts are prewashed and preshrunk and wrinkle-free, so the fit is set before the first wash.

Fit and sizing

Check the size chart before ordering. The SRsafety shirt comes in sizes from S to 6XL, with hand-measured dimensions, so allow some error. The BOCOMAL henley is cut big and tall, so do not size up. The BOCOMAL crew and the KONRECO shirt name no size range, so check the size chart before ordering.

Welding safety. An FR shirt is one layer of protection, not the whole kit. Wear a welding helmet, gloves and boots with it, keep the work area clear of anything that can burn, and vent fumes outdoors, especially when welding galvanized steel. Check the arc rating against the job, and replace a shirt when the fabric is torn or worn thin.

Before You Strike an Arc

  • Check the FR tag on the shirt and the arc rating against the job before the first bead.
  • Check the size chart: the SRsafety runs S to 6XL, and the BOCOMAL henley is cut big and tall.
  • Look for the chest pocket and cuffs on arrival: the BOCOMAL crew and henley have a chest pocket, and the KONRECO has none.
  • Check the reflective trim on the hi-vis shirts before the first night shift.
  • Confirm the wash count: up to 100 washes on the BOCOMAL crew and KONRECO, up to 50 washes on the BOCOMAL henley.

FAQ for welders

What does CAT 2 mean on an FR shirt?

CAT 2 is the arc rating class for shirts rated under NFPA 2112 and ASTM F1506. The shirts here carry arc ratings from 8 to 9.5 cal/cm2, with the BOCOMAL crew and the KONRECO hi-vis at the top. A higher arc rating means more protection from arc flash.

How many washes does FR protection last?

It depends on the shirt. The BOCOMAL crew and the KONRECO shirt hold FR protection for up to 100 washes, while the BOCOMAL henley holds it for up to 50 washes. The SRsafety and TICOMELA shirts state no wash count, so ask the maker before buying for long-term use.

Is a 5.5oz FR shirt as protective as a 7.0oz shirt?

Not by arc rating alone. The 5.5oz BOCOMAL henley is rated at 8 cal/cm2, while the 7.0oz SRsafety shirt is rated at 9.3 cal/cm2. Fabric weight affects comfort and feel; the arc rating is the protection figure to compare.

Do FR shirts need special washing?

Follow the care tag on the shirt. The BOCOMAL and KONRECO shirts are prewashed and preshrunk and wrinkle-free. Their FR protection is rated for up to 100 washes on the crew and KONRECO shirts and up to 50 washes on the henley.

What size FR shirt should I order?

Check the size chart first. The SRsafety shirt comes in sizes from S to 6XL, and its dimensions are measured by hand, so allow some error. The BOCOMAL henley is cut big and tall, so do not size up.

Related: best FR shirts for summer, best flame resistant hoodie for welding, best cotton welding shirt, best flame resistant shirt for big and tall and the welding safety gear hub.

Scoring, line by line

Each shirt is scored on performance, build, value, safety and warranty, with the weights explained on our How We Pick page. A spec the listing does not publish scores nothing.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
BOCOMAL FR Crew Tee 9.6 32 22 21 6 0
KONRECO Hi-Vis FR Tee 9.6 32 21 21 6 0
SRsafety Hi-Vis Shirt 9.6 30 21 20 7 0
TICOMELA FR Tee 9.5 29 20 20 5 0
BOCOMAL FR Henley 9.5 28 20 20 5 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides