Best Fr Shirts for Summer (2026): 5 CAT2 and CAT1 Picks
Flame resistant shirts for hot shop days, compared on arc rating, fabric weight, venting and stated wash life, with the listings' own figures.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVANLENS FR Henley9.6/10View on Amazon - 2
Best Vented HenleyBOCOMAL Vented Henley9.6/10View on Amazon - 3
Best Crew NeckBOCOMAL Vented Crew9.6/10View on Amazon - 4
Best Airflow PickVANDISI CAT1 Mesh Shirt9.5/10View on Amazon
A summer shift in a fab shop stacks heat from the arc and heat from the sun, and a heavy winter FR shirt turns that shift into a slog. A summer shirt has to carry its arc rating in a light fabric that moves air, with a fit that lets you reach, bend and climb without fighting the cloth. This guide compares the best fr shirts for summer on what each listing states: arc rating and CAT level, fabric weight, venting, wash life and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall VANLENS FR Henley: Highest arc rating here, 11.0 cal/cm², CAT2, 100 washes stated. Check price on Amazon
- Best Vented Henley BOCOMAL Vented Henley: Mesh panels under the arms, 8.9 cal/cm², CAT2, 100 washes stated. Check price on Amazon
- Best Crew Neck BOCOMAL Vented Crew: Same 8.9 cal/cm² rating and vented mesh as the henley, crew neck. Check price on Amazon
- Best Airflow Pick VANDISI CAT1 Mesh Shirt: 5.5 oz birdseye mesh, 5.5 cal/cm², CAT1, 100 washes stated. Check price on Amazon
The machines

VANLENS FR Shirts for Men Lightweight Welding
A CAT2 henley with the highest arc rating here at 11.0 cal/cm², a 6.5 oz fabric, rib cuffs and a stated wash life of 100 washes.
Pros
- Highest arc rating here at 11.0 cal/cm², CAT2
- Meets NFPA 2112, NFPA 70E and ASTM F1506, as stated
- 6.5 oz fabric with rib cuffs and a 3-button henley placket
- Stated wash life of 100 washes, home or industrial washing
Cons
- Heaviest fabric here at 6.5 oz, so the warmest on paper
- No vented mesh panels stated, unlike the BOCOMAL shirts
- Single spade chest pocket only, no hidden pocket stated
- No warranty term is stated

BOCOMAL FR Shirts for Summer Breathable Vented
A CAT2 henley with mesh panels under the arms, an 8.9 cal/cm² arc rating, a 6 oz fabric and a stated wash life of 100 washes.
Pros
- Inherent FR modacrylic mesh panels under the arms for airflow
- Arc rating of 8.9 cal/cm², CAT2, with NFPA 2112, NFPA 70E and ASTM F1506 stated
- 6 oz cotton jersey with a tagless neckline and rib cuffs
- Stated wash life of 100 washes; prewashed and preshrunk
Cons
- Lower arc rating than the VANLENS at 11.0 cal/cm²
- Hidden chest slit pocket only, no open pocket stated
- Maker states wash below 165°F, so a hot wash cycle is out
- No warranty term is stated

BOCOMAL FR Shirts for Summer Breathable Vented
A CAT2 crew neck shirt with the same 8.9 cal/cm² arc rating and vented mesh underarms as the henley, in a 6 oz fabric with a stated wash life of 100 washes.
Pros
- Inherent FR modacrylic mesh panels under the arms for airflow
- Arc rating of 8.9 cal/cm², CAT2, with NFPA 2112, NFPA 70E and ASTM F1506 stated
- Prewashed, preshrunk and wrinkle-free, per the listing
- Stated wash life of 100 washes
Cons
- Crew neck has no placket, so no venting adjustment at the neck
- Lower arc rating than the VANLENS at 11.0 cal/cm²
- Hidden chest slit pocket only, no open pocket stated
- No wash temperature is stated in the listing

Titicaca FR T-Shirt for men 5.5oz Lightweight
A CAT2 henley tee in a 5.5 oz cotton knit, with an 8 cal/cm² arc rating, a chest pocket and a stated wash life of 50 washes.
Pros
- Light 5.5 oz cotton knit fabric for hot days
- Arc rating of 8 cal/cm², CAT2, with NFPA 2112 and ASTM F1506 stated
- Prewashed, preshrunk and wrinkle-free, per the listing
- FR buttons and FR sewing threads stated
Cons
- Lowest stated wash life here at 50 washes
- Lower arc rating than the shirts ranked above it
- No vented mesh panels stated
- No cuff style stated in the listing

VANDISI FR Shirts for Men Birdseye Mesh Permanent
A CAT1 birdseye mesh shirt in a 5.5 oz fabric, with a 5.5 cal/cm² arc rating, a round neck and a stated wash life of 100 washes.
Pros
- Birdseye mesh fabric for airflow, 5.5 oz
- Lightweight stretch fabric that flexes with movement, per the listing
- Stated wash life of 100 washes; pre-washed and pre-shrunk
- Aramid thread stitching stated
Cons
- Lowest arc rating here at 5.5 cal/cm², CAT1 only
- No chest pocket stated
- No placket, so no neck venting adjustment
- No cuff style stated in the listing
Other welders and gear to compare
BOCOMAL FR Shirts for Summer Vented Mesh Loose Fit 4oz EXCheck price on Amazon
BOCOMAL FR Shirts for Summer Breathable Vented Mesh 6oz FireCheck price on Amazon
BOCOMAL Mens FR Shirt for Summer Lightweight Vented MeshCheck price on Amazon
BOCOMAL FR Shirts Summer Vented Mesh 5.5oz Breathable FireCheck price on Amazon
VATRENUS FR Shirt for Men 6.5oz Breathable Vented Mesh BackCheck price on Amazon
Spec sheet comparison
| Shirt | Gear Score | Arc rating | Fabric | Wash life | Collar | Warranty |
|---|---|---|---|---|---|---|
| VANLENS FR Henley | 9.6/10 | 11.0 cal/cm² | 6.5 oz | 100 washes | Henley, 3-button | None stated |
| BOCOMAL Vented Henley | 9.6/10 | 8.9 cal/cm² | 6 oz | 100 washes | Henley, 3-button | None stated |
| BOCOMAL Vented Crew | 9.6/10 | 8.9 cal/cm² | 6 oz | 100 washes | Crew | None stated |
| Titicaca FR Henley Tee | 9.5/10 | 8 cal/cm² | 5.5 oz | 50 washes | Henley, 3-button | None stated |
| VANDISI CAT1 Mesh Shirt | 9.5/10 | 5.5 cal/cm² | 5.5 oz | 100 washes | Crew | None stated |
Ratings in this table are the makers’ own claims taken from each product page (20 November 2026).
Buying guide: choosing the best fr shirts for summer
Arc rating and CAT level
The shirts here are CAT2 or CAT1, with stated arc ratings from 8 to 11.0 cal/cm² on the CAT2 shirts and 5.5 cal/cm² on the CAT1 shirt. Match the rating to the hazard assessment for your job; a higher rating is not a substitute for the rest of your PPE system, and a lighter fabric is not a reason to drop a CAT level your work calls for.
Fabric weight and venting
Fabric weights here run from 5.5 oz to 6.5 oz. The BOCOMAL shirts add modacrylic mesh panels under the arms, and the VANDISI uses a birdseye mesh body, while the VANLENS and the Titicaca state no mesh panels. Mesh under the arms moves air where a shirt traps heat, so it matters more than a small difference in fabric weight on a long hot shift.
Wash life
Stated wash life runs from 50 washes on the Titicaca to 100 washes on the rest. The BOCOMAL henley states machine washing warm below 165°F. Follow the washing guidance the maker states, since the flame resistant effect is rated for a stated number of washes, not forever.
Fit and pockets
The VANLENS states a generous cut and the Titicaca states a relaxed fit, so each leaves room for movement. Each shirt here states a chest pocket: a spade pocket on the VANLENS, a chest pocket on the Titicaca, and hidden slit pockets on the BOCOMAL shirts. A hidden slit pocket keeps small parts from snagging, while an open spade pocket is easier to reach into with gloves on.
Collar and cuffs
The VANLENS, the BOCOMAL henley and the Titicaca use a 3-button henley placket that opens at the neck when the shop gets hot; the BOCOMAL crew and the VANDISI use plain crew and round necks. Rib cuffs appear on the VANLENS and the BOCOMAL shirts, and cuffs that sit close keep sleeves clear of the work.
Use as directed. An FR shirt is one part of a PPE system, not a full system on its own. Pair it with the rest of the protection your hazard assessment calls for, keep it clean and intact, and replace it when the fabric is worn or damaged. Check the FR tag and the arc rating on arrival, and follow the washing guidance the maker states.
Before You Strike an Arc
- Check the FR tag and the stated arc rating on the shirt when it arrives, and match them to the hazard assessment for your job.
- Try the shirt on with the rest of your PPE and check that the cuffs sit clear of the work and the pocket closes.
- Wash the shirt as the maker states and keep it free of flammable contamination; a shirt soaked in oil or fuel is not the protection the label promises.
- Look the shirt over before each shift and retire it when the fabric is worn, torn or thinned.
FAQ for welders
What arc rating do I need in an FR shirt for summer?
The shirts here state arc ratings from 5.5 to 11.0 cal/cm², with CAT1 on the VANDISI and CAT2 on the rest. Match the rating to the hazard assessment for your job and to the rest of your PPE. A summer shirt still has to meet the rating your work calls for, and a lighter fabric is not a reason to drop a CAT level.
How long does FR protection last through washing?
The makers here state wash lives of 50 washes on the Titicaca and 100 washes on the rest. Wash as the maker states and retire the shirt when the fabric is worn or the stated wash life is reached.
Do any of these shirts have reflective stripes or a flag print?
None of the shirts here state reflective stripes, hi-vis panels or a flag print. If you need reflective stripes for road work, look for a shirt that states them, and check the stated arc rating and CAT level the same way.
Are FR shirts comfortable in summer heat?
Fabric weight and venting decide that. The lowest-weight fabrics here are 5.5 oz, on the Titicaca and the VANDISI, and the BOCOMAL shirts add mesh panels under the arms. A generous or relaxed cut also helps air move, as stated on the VANLENS and the Titicaca.
Can I wear an FR shirt on its own for welding?
An FR shirt is one part of a PPE system. The VANLENS shirt is described as part of a PPE system for flash fire and arc flash hazards, and the rest of the shirts name the same hazards. Wear the rest of the protection your hazard assessment calls for, including a welding helmet, gloves and the right outer layers.
Related: knife casting, FR workwear, best FR coveralls, best FR jeans, best welding jacket, welding shirt vs welding jacket, leather vs FR cotton welding jacket, and welding safety gear checklist for beginners.
Scoring, line by line
Each shirt is scored on performance, build, value, safety listing and warranty. Every shirt here states a safety standard, so the safety scores come from the stated arc rating and CAT level. No shirt here states a warranty term, so every shirt scores zero on warranty and the ranking comes from the other criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VANLENS FR Henley | 9.6 | 30 | 21 | 21 | 8 | 0 |
| BOCOMAL Vented Henley | 9.6 | 29 | 21 | 21 | 8 | 0 |
| BOCOMAL Vented Crew | 9.6 | 28 | 21 | 21 | 8 | 0 |
| Titicaca FR Henley Tee | 9.5 | 27 | 20 | 20 | 7 | 0 |
| VANDISI CAT1 Mesh Shirt | 9.5 | 26 | 20 | 20 | 6 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




