Best Fr Coveralls (2026): 5 Picks for Welding and Shop Work
Five flame-resistant coveralls for welding and shop work, compared on arc rating, fabric weight, pockets, visibility and the certifications each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJust In Trend Hi-Vis9.7/10View on Amazon - 2
Best Without Hi-VisJust In Trend Orange9.6/10View on Amazon - 3
Heaviest FabricBulwark Deluxe9.6/10View on Amazon - 4
Hi-Vis StretchBOCOMAL Hi-Vis9.6/10View on Amazon
A bead that runs long, a grinder throwing sparks at your legs, a fit-up that keeps you crouched beside the work: the coverall takes the heat and the spatter so your clothes do not. This guide compares the best fr coveralls for welding and shop work on what each listing states: arc rating, fabric weight, pockets, visibility and the certifications behind them. Five CAT 2 coveralls are scored here, and the pick depends on how much arc protection and visibility the job needs.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Just In Trend Hi-Vis: ATPV 12 with CAT 2, ANSI/ISEA 107 Class 3 reflective tape, and a full pocket set with a hammer loop. Check price on Amazon
- Best Without Hi-Vis Just In Trend Orange: The same ATPV 12 and CAT 2 rating in orange, with the same YKK brass zipper and pocket set, and no reflective tape. Check price on Amazon
- Heaviest Fabric Bulwark Deluxe: 9 oz 100% cotton twill with ATPV 11, a concealed Nomex taped break-away zipper and a rule pocket. Check price on Amazon
- Hi-Vis Stretch BOCOMAL Hi-Vis: Stretch ripstop with ATPV 9.6, CAT 2, and Class 1 reflective tape over an FR contrast stripe. Check price on Amazon
The machines

Flame Resistant FR High Visibility Hi Vis Coverall
A 7 oz 88% cotton and 12% nylon coverall with an ATPV of 12, CAT 2, and ANSI/ISEA 107 Class 3 reflective tape, in navy blue.
Pros
- ATPV 12, the highest arc rating stated here, with CAT 2
- ANSI/ISEA 107 Class 3 with 2-inch FR reflective tape
- Heavy-duty 2-way YKK brass FR zipper with action back pleats
- Full pocket set with utility pocket, arm pocket, pen slot and hammer loop
Cons
- 7 oz fabric, lighter than the 9 oz Bulwark twill
- Comes in navy blue only
- Needs mild wash temperatures and mild detergents to extend fabric life
- Size up is recommended when worn over other garments or after routine industrial washes

Flame Resistant FR Coverall
A 7 oz 88% cotton and 12% nylon coverall with an ATPV of 12, CAT 2, and a heavy-duty YKK brass zipper, in orange.
Pros
- ATPV 12 with a CAT 2 rating, the highest arc rating stated here
- NFPA 2112 and ASTM F1506 compliance with UL Certification
- Heavy-duty 2-way YKK brass FR zipper with action back pleats
- Full pocket set with utility pocket, arm pocket, pen slot and hammer loop
Cons
- No reflective tape, so it does not add visibility in low light
- 7 oz fabric, lighter than the 9 oz Bulwark twill
- Needs mild wash temperatures and mild detergents to extend fabric life
- Size up is recommended when worn over other garments or after routine industrial washes

Bulwark Men's Flame Resistant 9 oz Twill Cotton
A 9 oz 100% cotton twill coverall with an ATPV of 11, CAT 2, and a concealed Nomex taped break-away zipper, in navy.
Pros
- ATPV 11 with a CAT 2 rating, UL certified to NFPA 2112
- 9 oz midweight 100% cotton twill, the heaviest fabric stated here
- Two-way concealed Nomex taped brass break-away zipper with a snap at the neck
- Side vents with snap closure and a rule pocket on the right leg
Cons
- No reflective tape, so it does not add visibility in low light
- Fewer pockets than the other coveralls here
- No action back pleats for extra reach
- Comes in navy only

BOCOMAL FR Coveralls Men Lightweight Strecth
A stretch ripstop hi-vis coverall with an ATPV of 9.6, CAT 2, and ANSI/ISEA 107 Type O Class 1 reflective tape, in high-vis dark navy.
Pros
- ATPV 9.6 with a CAT 2 rating, meeting NFPA 2112 and NFPA 70E
- ANSI/ISEA 107 Type O Class 1 with double-stitched reflective tape over an FR contrast stripe
- Stretch ripstop fabric with a relaxed fit and elastic waistband
- Tool pocket on the right leg plus pass-through pockets and a flag patch on the sleeve
Cons
- ATPV 9.6, lower than the Bulwark ATPV 11 and the Just In Trend ATPV 12
- Reflective tape is Class 1, below the Class 3 tape on the Just In Trend hi-vis
- 98% cotton with 2% spandex, not the 100% cotton of the ATERET and Bulwark
- No warranty term is stated

ATERET Men's Flame Resistant Coverall
A 7 oz 100% FR cotton coverall with an ATPV of 8, CAT 2, and six pockets with a zipper front, in navy blue.
Pros
- Certified to NFPA 2112 (UL, 2018 edition) with an ATPV of 8
- 100% FR-treated cotton that does not melt or drip
- Flame resistance holds through more than 50 washes
- Six pockets with a zipper front and heavy-duty copper hardware
Cons
- ATPV 8, the lowest arc rating stated here
- Not intended for structural firefighting
- No side vents, unlike the Bulwark and Just In Trend coveralls
- No warranty term is stated
Other welders and gear to compare
BOCOMAL FR Coveralls Men Lightweight Strecth Ripstop FlameCheck price on Amazon
BOCOMAL FR Coveralls Men High Visibility Midweight ReflectiveCheck price on Amazon
Dickies Men’s Deluxe Long Sleeve CoverallsCheck price on Amazon
Dickies Mens Bib Overalls and Coveralls Workwear ApparelCheck price on Amazon
Dickies Mens Hickory Striped Bib Overalls and CoverallsCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Arc rating (ATPV) | Fabric | Hi-vis | Pockets | Warranty |
|---|---|---|---|---|---|---|
| Just In Trend Hi-Vis | 9.7/10 | 12 cal/cm² | 88% cotton, 12% nylon, 7 oz | ANSI/ISEA 107 Class 3, 2 in FR tape | 2 chest, 2 front, 2 hip, utility, arm, pen, hammer loop | None stated |
| Just In Trend Orange | 9.6/10 | 12 cal/cm² | 88% cotton, 12% nylon, 7 oz | Not stated | 2 chest, 2 front, 2 hip, utility, arm, pen, hammer loop | None stated |
| Bulwark Deluxe | 9.6/10 | 11 cal/cm² | 100% cotton twill, 9 oz | Not stated | 2 chest, sleeve, rule | None stated |
| BOCOMAL Hi-Vis | 9.6/10 | 9.6 cal/cm² | 98% cotton, 2% spandex, 7 oz | ANSI/ISEA 107 Type O Class 1 | 2 chest, 2 back, 2 side, tool, 2 pass-through | None stated |
| ATERET Navy | 9.5/10 | 8 cal/cm² | 100% FR cotton, 7 oz | Not stated | 2 chest, 2 side, 2 rear | None stated |
All specs here repeat what the maker rates and the listing prints, copied down 19 November 2026.
How to pick the best fr coveralls
Arc rating
The arc rating, written as ATPV in calories per square centimeter, is the number to compare first. The two Just In Trend coveralls state ATPV 12, the Bulwark states ATPV 11, the BOCOMAL states ATPV 9.6, and the ATERET states ATPV 8. All five are CAT 2, so the rating, not the category, separates them. Match the rating to the arc flash risk of the work in front of you.
Fabric weight
Fabric weight is stated in ounces per square yard. The Bulwark is the heaviest here at 9 oz in 100% cotton twill, while the ATERET and both Just In Trend coveralls state 7 oz. The BOCOMAL gives two fabric weights, 7 oz and 6 oz, so check before ordering. Cotton content also differs: the ATERET and Bulwark are 100% cotton, the Just In Trend coveralls are 88% cotton and 12% nylon, and the BOCOMAL is 98% cotton and 2% spandex.
Hi-vis and reflective tape
Two coveralls here add visibility. The Just In Trend hi-vis carries ANSI/ISEA 107 Class 3 with 2-inch FR reflective tape, and the BOCOMAL carries ANSI/ISEA 107 Type O Class 1 with 1-inch silver reflective tape over a 2-inch FR contrast stripe. The orange Just In Trend, the Bulwark and the ATERET state no reflective tape. If the job puts you near traffic or in low light, the tape and the class rating decide the pick.
Pockets and fit
Pockets decide where tools and a pencil live during the shift. The ATERET states six pockets, with a pencil slot in the chest pocket. The BOCOMAL adds a tool pocket on the right leg and pass-through pockets, and both Just In Trend coveralls add a utility pocket, an arm pocket, a pen slot and a hammer loop. The Bulwark keeps it simpler with two chest pockets, a sleeve pocket and a rule pocket. For fit, the ATERET lists nine sizes from small to 6X-large, and the Just In Trend coveralls suggest one size up when worn over other garments or after routine industrial washes.
Washing and care
FR treatment needs the right wash. The ATERET is machine washable and holds its flame resistance through more than 50 washes, with care per the care label. The Just In Trend coveralls call for mild wash temperatures and mild detergents to extend fabric life and minimize shrinkage. Check the care label on arrival and follow it, since the wrong wash shortens the life of the treatment.
Use as directed. FR coveralls are rated for flash fire and arc flash, not for structural firefighting, and the rating on the label is the limit to respect. Keep the zipper closed and the cuffs fastened while welding, keep the garment clear of the arc and hot metal, and check the label for the arc rating before the job. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Check the size chart before ordering: the ATERET lists nine sizes from small to 6X-large, and the Just In Trend coveralls suggest one size up when worn over other garments or after routine industrial washes.
- Check the zipper and cuffs on arrival: the Bulwark uses a two-way concealed break-away zipper with a snap at the neck, and the Just In Trend coveralls use a two-way YKK brass zipper.
- Match the arc rating to the work: the coveralls here state ATPV 8 to 12, all CAT 2.
- Check the reflective tape before the first shift: the BOCOMAL and the Just In Trend hi-vis state ANSI/ISEA 107 tape.
FAQ for welders
What does CAT 2 mean on FR coveralls?
CAT 2, also written HRC 2, is the arc flash category the makers state for these coveralls. All five coveralls here are CAT 2, with arc ratings from ATPV 8 to ATPV 12. The category is the same across the five, so compare the ATPV number when choosing between them.
What arc rating do these coveralls carry?
The two Just In Trend coveralls state ATPV 12, the Bulwark states ATPV 11, the BOCOMAL states ATPV 9.6, and the ATERET states ATPV 8. Each rating comes with a CAT 2 rating and NFPA 2112 compliance. Pick the rating that matches the arc flash risk of the work.
Are these coveralls hi-vis?
Two of them are. The Just In Trend hi-vis is ANSI/ISEA 107 Class 3 with 2-inch FR reflective tape, and the BOCOMAL is ANSI/ISEA 107 Type O Class 1 with 1-inch silver reflective tape over a 2-inch FR contrast stripe. The orange Just In Trend, the Bulwark and the ATERET state no reflective tape.
How do I wash FR coveralls?
Follow the care label. The ATERET is machine washable and holds its flame resistance through more than 50 washes. The Just In Trend coveralls call for mild wash temperatures and mild detergents to extend fabric life and minimize shrinkage.
Do FR coveralls come in big sizes?
The ATERET lists nine sizes from small to 6X-large in navy blue with a regular fit. The BOCOMAL and Just In Trend coveralls point to their size charts, so check the chart before ordering and consider one size up when the coverall goes over other garments.
Related: best FR jeans, bib overalls vs coveralls, best welding coveralls for women, best high vis welding shirt, and the knife casting hub. Also see our fr high vis winter jacket. Also see our fr hoodie jackets.
Scoring, line by line
Each coverall is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Every coverall here states a UL certification to NFPA 2112, so safety scores come from the stated arc rating and certifications. No warranty term is stated for any coverall here, so every coverall scores zero on warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Just In Trend Hi-Vis | 9.7 | 32 | 21 | 21 | 9 | 0 |
| Just In Trend Orange | 9.6 | 30 | 21 | 21 | 8 | 0 |
| Bulwark Deluxe | 9.6 | 29 | 22 | 20 | 7 | 0 |
| BOCOMAL Hi-Vis | 9.6 | 28 | 20 | 21 | 7 | 0 |
| ATERET Navy | 9.5 | 27 | 20 | 20 | 5 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




