Best FR High Vis Winter Jacket (2026): 5 Picks for the Shop
Five FR high vis winter jackets for welders and shop work, compared on FR rating, hi-vis class, insulation, temperature rating and pockets.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBOCOMAL CAT4 FR Jacket9.7/10View on Amazon - 2
Coldest RatedErgodyne 83909.7/10View on Amazon - 3
Best WaterproofPioneer Hi Vis Bomber9.6/10View on Amazon - 4
Best FR HoodieBOCOMAL FR Hoodie9.6/10View on Amazon
Winter work on a fab shop floor starts before the heaters catch up. The gate frame waits outside, the forklift crosses the yard in the dark, and beads from the morning weld throw sparks near your chest. A best fr high vis winter jacket has to handle all of it at once: keep you warm, keep you seen, and keep sparks off your skin. This guide compares the jackets on FR rating, hi-vis class, insulation, temperature rating and pockets.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall BOCOMAL CAT4 FR Jacket: CAT4 FR rating at 54 calories/cm2 with UL classification, ANSI 107 Type O Class 1 tape and 180g quilt insulation. Check price on Amazon
- Coldest Rated Ergodyne 8390: Rated to -55°F with 180g body insulation, a heat reflective lining and Type R Class 3 reflective tape. Check price on Amazon
- Best Waterproof Pioneer Hi Vis Bomber: Class 3 Type P and R hi-vis with a 100% waterproof shell, a 1°F to 48°F rating and a removable fleece liner. Check price on Amazon
- Best FR Hoodie BOCOMAL FR Hoodie: CAT2 FR fleece at 14oz with an ATPV of 21 calories/cm2, ANSI 107 Class 1 Type O tape and FR protection for up to 100 washes. Check price on Amazon
The machines

BOCOMAL FR Jacket Insulated Hi Vis Heavyweight
A CAT4 FR jacket with an ATPV of 54 calories/cm2, UL classification and 180g quilt insulation in a 10.5oz canvas shell.
Pros
- CAT4 FR rating with an ATPV of 54 calories/cm2, the highest arc rating here
- NFPA 2112 and NFPA 70E with UL classification, plus ASTM F1506
- 180g quilt insulation with a 9oz FR flannel lining
- 360-degree reflective tape around shoulders, chest, back and arms
Cons
- Class 1 hi-vis, the lowest class in this guide
- No temperature rating is stated for cold work
- One outside chest pocket, against 10 on the JKSafety
- Canvas and quilt lining suit cold FR work, not mild days

Ergodyne 8390 Hi-Vis Winter Jacket, ampliFIRE
A Type R Class 3 winter jacket rated to -55°F, with 180g body insulation and a heat reflective lining.
Pros
- Rated to -55°F, the coldest rating here
- Type R Class 3 hi-vis for night work
- 180g insulation on the body and 140g on the sleeves
- Heat reflective ampliFIRE lining traps body heat
Cons
- No FR rating is stated
- Water-resistant, not the waterproof shell of the Pioneer
- No hood is stated
- Built for deep cold, not mild days

Pioneer Hi Vis Rain Jacket
A Class 3 Type P and R waterproof bomber rated 1°F to 48°F, with a removable fleece liner and a detachable hood.
Pros
- Class 3 Type P and R hi-vis, the highest class here
- 100% waterproof and windproof PU-coated shell with heat-sealed seams
- Rated 1°F to 48°F per ASTM F2732-23
- Removable fleece liner and detachable snap hood
Cons
- No FR rating is stated
- Four pockets, fewer than the 10 on the JKSafety
- Rated to 48°F at the top, so it is a cold-weather jacket
- Yellow and black is the only colorway in this listing

BOCOMAL FR Hoodies Hi-vis 14oz Fleece Jackets
A CAT2 FR hooded sweatshirt in 14oz FR-treated fleece, with an ATPV of 21 calories/cm2 and Class 1 Type O tape.
Pros
- CAT2 FR rating with an ATPV of 21 calories/cm2
- 14oz heavyweight cotton fleece, FR treated
- FR protection stays effective up to 100 washes
- ANSI 107 Class 1 Type O tape with a 4 in FR contrast stripe
Cons
- Class 1 hi-vis, the lowest class here
- No temperature rating is stated
- No storm flap is stated
- Hooded cut suits layering, not standalone deep-cold work

JKSafety Safety Jakcet for Men Women 3M Reflective
A 10-pocket winter bomber with 160g quilted insulation and seven 3M Scotchlite reflective strips, with no FR rating.
Pros
- 10 pockets, including a tablet pocket and a retractable ID pocket
- 160g quilted DuPont Sorona insulation with a fleece-lined collar
- Seven 2 in 3M Scotchlite reflective strips on chest, waist and arms
- 300D Oxford shell with DuPont Teflon coating for water and dirt resistance
Cons
- Not an FR standard, the maker states plainly
- No ANSI hi-vis class is stated
- No temperature rating is stated
- Built for municipal and road crews, not for work near arc flash
Other welders and gear to compare
BOCOMAL FR Jacket Insulated Hi Vis Heavyweight ReflectiveCheck price on Amazon
BOCOMAL FR Jacket Insulated High Visibility Heavy DutyCheck price on Amazon
Reflective JacketsCheck price on Amazon
Safety Jackets for Women Reflective Hi Vis Winter Hoodie ANSICheck price on Amazon
3-in-1 Hi Vis Safety Bomber Jacket with Zip-Up Fleece LinerCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | FR rating | Hi-vis class | Insulation | Temp rating | Warranty |
|---|---|---|---|---|---|---|
| BOCOMAL CAT4 FR Jacket | 9.7/10 | CAT4, ATPV 54 calories/cm2 | Type O Class 1 | 180g quilt | Not stated | Not stated |
| Ergodyne 8390 | 9.7/10 | Not stated | Type R Class 3 | 180g body, 140g sleeves | -55°F | Not stated |
| Pioneer Hi Vis Bomber | 9.6/10 | Not stated | Class 3 Type P and R | Removable fleece liner | 1°F to 48°F | Not stated |
| BOCOMAL FR Hoodie | 9.6/10 | CAT2, ATPV 21 calories/cm2 | Type O Class 1 | 14oz fleece | Not stated | Not stated |
| JKSafety JK118 | 9.4/10 | Not FR, maker states | Not stated | 160g quilted | Not stated | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (20 November 2026).
What to look for in the best fr high vis winter jacket
FR rating and arc rating
Two jackets here state an FR rating. The BOCOMAL CAT4 jacket meets NFPA 2112 at CAT4 with an arc rating of 54 calories/cm2, plus NFPA 70E and ASTM F1506 with UL classification. The BOCOMAL hoodie meets NFPA 2112 at CAT2 with an arc rating of 21 calories/cm2. The other three jackets state no FR rating, and the JKSafety maker states plainly that its jacket is not an FR standard. Pick a stated FR rating for arc flash work.
Hi-vis class and type
Hi-vis class decides how a jacket is seen at night. The Ergodyne 8390 carries Type R Class 3 with 2 inch ANSI/ISEA 107-2020 reflective material, and the Pioneer carries Class 3 Type P and R under ANSI/ISEA 107-22. The two BOCOMAL jackets carry Type O Class 1, with 2 inch silver tape over a 4 inch stripe on each. The JKSafety jacket states no ANSI class, though it uses seven 2 inch 3M Scotchlite strips.
Insulation and temperature rating
Insulation weight and temperature ratings tell you how cold a jacket is built for. The Ergodyne 8390 is rated to -55°F with 180g of insulation on the body and 140g on the sleeves, plus a heat reflective lining. The BOCOMAL CAT4 jacket has 180g of quilt insulation over a 9oz FR flannel lining. The JKSafety bomber has 160g of quilted DuPont Sorona insulation. The Pioneer has a removable fleece liner and a temperature rating of 1°F to 48°F per ASTM F2732-23. The BOCOMAL hoodie is 14oz FR fleece with no stated temperature rating.
Pockets, hood and fit
Pockets decide what rides with you. The JKSafety bomber has 10 pockets, including a tablet pocket and a retractable ID pocket, with one internal pocket and seven external pockets. The Pioneer has four pockets: two large zip pockets, a cell phone pocket and an inside chest pocket, plus radiophone clip straps. The BOCOMAL CAT4 jacket has one left chest zipper pocket, two inside pockets, one sleeve pocket, one tool loop and one interphone loop. The Ergodyne and the hoodie state no pocket count.
Water and wind protection
Winter jackets face rain, snow and wind as well as cold. The Pioneer shell is 100% waterproof and windproof PU-coated oxford polyester with double-stitched and heat-sealed seams. The Ergodyne shell is 300D polyester with a wind- and water-resistant PU coating. The JKSafety shell is 300D Oxford with a DuPont Teflon coating for waterproofing and dirt resistance. The BOCOMAL hoodie has a water repellent and oil resistant finish, and the CAT4 jacket has a water repellent and stain resistant finish with windproof rib-knit cuffs and waistband.
Use as directed. FR clothing is a layer of protection, not a substitute for a welding helmet, gloves and eye protection. Check the garment tag for the FR rating and care instructions, and wash FR garments as the maker directs so the treatment lasts. Never wear a non-FR jacket for work near arc flash, and keep cuffs and hems clear of the weld zone.
Before You Strike an Arc
- Check the garment tag for the FR rating: CAT4 on the BOCOMAL jacket, CAT2 on the BOCOMAL hoodie, and no FR rating on the other three.
- Check the hi-vis class against the job: Class 3 on the Ergodyne and Pioneer, Class 1 on the two BOCOMAL jackets.
- Check the temperature rating against the shift: -55°F on the Ergodyne, 1°F to 48°F on the Pioneer.
- Try the jacket over the layers you weld in, and check the zipper, hood and cuffs.
- Read the wash care on the tag: the two BOCOMAL jackets state FR protection stays effective for up to 100 washes.
FAQ for welders
What does CAT2 mean on an FR jacket?
The BOCOMAL hoodie meets NFPA 2112 at CAT2 with an arc rating of 21 calories/cm2. CAT4 is the higher rating here: the BOCOMAL jacket meets NFPA 2112 at CAT4 with an arc rating of 54 calories/cm2, plus NFPA 70E and ASTM F1506 with UL classification.
What is the difference between ANSI Type O and Type R hi-vis?
Type O and Type R are the two types stated here. The two BOCOMAL jackets carry Type O Class 1, while the Ergodyne 8390 carries Type R Class 3 and the Pioneer carries Class 3 Type P and R.
Do FR jackets stay flame resistant after washing?
The two BOCOMAL jackets state FR protection stays effective for up to 100 washes. Wash FR garments as the maker directs, and check the garment tag for care instructions before you wear them.
Can I wear a non-FR hi-vis jacket for welding?
For work near arc flash, wear a jacket that states an FR rating. The JKSafety jacket states plainly that it is not an FR standard, and the Pioneer and Ergodyne jackets state no FR rating.
How cold can these jackets handle?
The Ergodyne 8390 is rated to -55°F, and the Pioneer is rated 1°F to 48°F per ASTM F2732-23. The other three jackets state no temperature rating.
Related: knife casting hub, FR workwear hub, best welding jacket, best flame resistant hoodie for welding, and best FR shirts for summer.
Scoring, line by line
Each jacket is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No jacket here states a warranty term, so warranty scores zero across the guide. Safety scores come from the standards each maker states, and the JKSafety jacket states no safety standard, so it scores zero on safety. The ranking comes from the other criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BOCOMAL CAT4 FR Jacket | 9.7 | 32 | 22 | 21 | 9 | 0 |
| Ergodyne 8390 | 9.7 | 30 | 22 | 21 | 9 | 0 |
| Pioneer Hi Vis Bomber | 9.6 | 29 | 21 | 21 | 9 | 0 |
| BOCOMAL FR Hoodie | 9.6 | 27 | 20 | 21 | 8 | 0 |
| JKSafety JK118 | 9.4 | 26 | 20 | 20 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




