Best Flame Resistant Hoodie for Welding (2026)
Five flame resistant hoodies for welding compared on fabric weight, NFPA 2112 rating, fit, pockets and cuffs, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBOCOMAL 10.5 oz Fleece9.6/10View on Amazon - 2
Best Quarter-ZipVANLENS 10.5 oz Quarter-Zip9.6/10View on Amazon - 3
Best for WeldingVANDISI 10.5 oz Welding9.5/10View on Amazon - 4
Best LightweightBOCOMAL 7.5 oz Terry9.5/10View on Amazon
Spatter lands on your sleeve before you notice it, and a plain cotton hoodie will not hold up to that all day. For shop work, the best flame resistant hoodie for welding is an FR pullover with a stated NFPA 2112 rating, and this guide compares five on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall BOCOMAL 10.5 oz Fleece: 10.5 oz fleece, NFPA 2112 UL Certified CAT 2, rib-knit cuffs. Check price on Amazon
- Best Quarter-Zip VANLENS 10.5 oz Quarter-Zip: 10.5 oz heavyweight, NFPA 2112 UL Certified CAT 2, zip neck for venting. Check price on Amazon
- Best for Welding VANDISI 10.5 oz Welding: 10.5 oz fleece, NFPA 2112 CAT 2, welding in the title, inner pocket. Check price on Amazon
- Best Lightweight BOCOMAL 7.5 oz Terry: 7.5 oz terry, NFPA 2112 CAT 2, sleeve lengths stated by size. Check price on Amazon
The machines

BOCOMAL FR Hoodies Pullover 10.5oz Fleece Flame
A 10.5 oz fleece FR hoodie in 100% cotton with NFPA 2112 UL Certified CAT 2, a kangaroo pocket and rib-knit cuffs.
Pros
- NFPA 2112 UL Certified CAT 2 stated
- 10.5 oz fleece, midweight
- Rib-knit cuffs
- Kangaroo pocket, classic style
Cons
- No sleeve lengths stated
- No warranty term is stated
- No zip neck for venting
- Heavier than the 7.5 oz hoodies here

FR Hoodies For Men 10.5oz Heavyweight Flame
A 10.5 oz heavyweight FR hoodie in 100% cotton with a quarter-zip neck, NFPA 2112 UL Certified CAT 2 and a kangaroo pocket.
Pros
- NFPA 2112 UL Certified CAT 2 stated
- Quarter-zip neck for venting
- 10.5 oz heavyweight fabric
- Rib-knit cuffs
Cons
- No sleeve lengths stated
- No warranty term is stated
- Letter print, the only printed pattern here

FR Hoodie for Men 10.5oz Flame Resistant Welding
A 10.5 oz fleece FR hoodie in 100% cotton with NFPA 2112 CAT 2, a kangaroo and inner pocket, rib knit cuffs and contrast stitching.
Pros
- Welding named in the title
- 10.5 oz fleece, heavyweight
- Kangaroo and inner pocket
- Rib knit cuffs and contrast stitching
Cons
- No UL certification stated
- States water repellent but no stain resistance
- No sleeve lengths stated
- No warranty term is stated

BOCOMAL FR Hoodie Pullover 7.5oz Lightweight Flame
A 7.5 oz lightweight FR hoodie in 100% cotton terry with NFPA 2112 CAT 2, a kangaroo pocket and sleeve lengths stated by size.
Pros
- 7.5 oz lightweight terry for summer
- Sleeve lengths stated, 25.2 to 28 in
- NFPA 2112 CAT 2 stated
- Kangaroo pocket, water repellent and stain resistant
Cons
- No UL certification stated
- No fleece lining
- No rib-knit cuffs stated
- No warranty term is stated

FR Hoodies Pullover 7.5oz Flame Resistant Hooded
A 7.5 oz lightweight FR hoodie in 100% cotton with NFPA 2112 CAT 2, double kangaroo pockets and moisture wicking.
Pros
- Double kangaroo pockets
- Breathable and moisture wicking stated
- 7.5 oz lightweight fabric
- NFPA 2112 CAT 2 stated
Cons
- No UL certification stated
- No rib-knit cuffs stated
- No sleeve lengths stated
- No warranty term is stated
Spec sheet comparison
| Model | Gear Score | Weight | Rating | Fabric | Fit | Pockets | Warranty |
|---|---|---|---|---|---|---|---|
| BOCOMAL 10.5 oz Fleece | 9.6/10 | 10.5 oz | NFPA 2112 UL Certified CAT 2 | 100% cotton | Relaxed | Kangaroo | Not stated |
| VANLENS 10.5 oz Quarter-Zip | 9.6/10 | 10.5 oz | NFPA 2112 UL Certified CAT 2 | 100% cotton | Loose | Kangaroo | Not stated |
| VANDISI 10.5 oz Welding | 9.5/10 | 10.5 oz | NFPA 2112 CAT 2 | 100% cotton | Regular | Kangaroo, inner | Not stated |
| BOCOMAL 7.5 oz Terry | 9.5/10 | 7.5 oz | NFPA 2112 CAT 2 | 100% cotton | Relaxed | Kangaroo | Not stated |
| VANDISI 7.5 oz Pullover | 9.5/10 | 7.5 oz | NFPA 2112 CAT 2 | 100% cotton | Loose | Double kangaroo | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 October 2026.
Buying guide: the best flame resistant hoodie for welding
Fabric weight
Weights here are 7.5 oz and 10.5 oz. The 7.5 oz hoodies are lightweight terry for summer work, per the BOCOMAL listing, while the 10.5 oz hoodies are fleece or heavyweight for cooler shops. Heavier fabric lasts longer against spatter, but it runs hotter, so match the weight to your shop.
NFPA 2112 and CAT 2
All five hoodies state NFPA 2112 and CAT 2. Two of them add UL certification: the BOCOMAL 10.5 oz fleece and the VANLENS quarter-zip. A stated rating is what separates an FR hoodie from a plain cotton one, so check the rating line before you buy, and never trust a listing that leaves it out.
Fit and sizing
Fits here run relaxed, loose and regular, with sizes to 5X-Large on all five listings. The BOCOMAL 7.5 oz hoodie states sleeve lengths from 25.2 to 28 inches by size, the only listing to give them. A relaxed or loose fit layers over a shirt, while a regular fit stays closer to the body under a welding jacket.
Pockets and cuffs
Every hoodie here has a kangaroo pocket, and the VANDISI 7.5 oz adds a second one. The BOCOMAL 10.5 oz fleece and the VANDISI 10.5 oz welding hoodie add rib-knit cuffs, which keep sleeves out of the work. The VANLENS quarter-zip is the only one with a zip neck, which vents heat between beads.
Water repellent and stain resistant
Four of the five listings state water repellent and stain resistant finishes: both BOCOMAL hoodies, the VANLENS and the VANDISI 7.5 oz. The VANDISI 10.5 oz welding hoodie states water repellent but no stain resistance. A repellent finish keeps spatter and shop grime off the cotton, but it does not replace the FR rating.
Use as directed. An FR hoodie is one layer of protection, not a full welding outfit. Wear it under a welding jacket for heavy spatter, keep the hood down and the cuffs closed near the arc, and check the garment for wear before each use. See our Safety Disclaimer.
Before You Strike an Arc
- Check the rating on arrival: all five state NFPA 2112 CAT 2, and two add UL certification.
- Try the fit over a shirt: fits here are relaxed, loose and regular, with sizes to 5X-Large.
- Check the cuffs and pockets: rib-knit cuffs keep sleeves out of the work, and the VANDISI 7.5 oz has double kangaroo pockets.
- Machine wash per the listing: every hoodie here lists machine wash care.
FAQ for welders
What makes a hoodie flame resistant?
The fabric and the rating. All five hoodies here are 100% cotton with an NFPA 2112 CAT 2 rating, and two add UL certification. A plain cotton hoodie has no such rating, so check the rating line on the listing before you buy.
Is a 7.5 oz or 10.5 oz hoodie better for welding?
It depends on the shop. The 7.5 oz hoodies are lightweight terry for summer work, per the BOCOMAL listing, while the 10.5 oz hoodies are fleece or heavyweight for cooler shops. Heavier fabric stands up longer to spatter, but it runs hotter, so match the weight to your day.
Can I wear an FR hoodie instead of a welding jacket?
For light work, an FR hoodie is a common shop layer, but it is not a welding jacket. For heavy spatter or overhead work, wear the hoodie under a welding jacket and keep the hood down and the cuffs closed near the arc.
How do I wash a flame resistant hoodie?
Every listing here says machine wash. Follow the care line on the listing you buy.
What size FR hoodie should I buy?
Sizes here run to 5X-Large, with relaxed, loose and regular fits. The BOCOMAL 7.5 oz hoodie states sleeve lengths from 25.2 to 28 inches by size, the only listing to give them. If you layer over a shirt, size up from your usual fit.
Related: best welding jacket, best flame resistant shirt for welding, flame resistant shirt vs cotton shirt, best flame resistant welding pants and the welding safety gear hub.
Scoring, line by line
Each hoodie is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. The safety score follows the stated NFPA 2112 rating: the two UL Certified listings score higher than the three that state the rating without UL certification. No listing here states a warranty term, so every hoodie scores zero on warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BOCOMAL 10.5 oz Fleece | 9.6 | 30 | 21 | 21 | 7 | 0 |
| VANLENS 10.5 oz Quarter-Zip | 9.6 | 29 | 21 | 20 | 7 | 0 |
| VANDISI 10.5 oz Welding | 9.5 | 29 | 20 | 20 | 5 | 0 |
| BOCOMAL 7.5 oz Terry | 9.5 | 28 | 20 | 20 | 5 | 0 |
| VANDISI 7.5 oz Pullover | 9.5 | 28 | 20 | 19 | 5 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.





