Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Flame Resistant Shirt for Welding (2026)

Five 100% cotton flame resistant shirts compared by fabric weight, NFPA 2112 rating, arc rating and fit, ranked for welding.

Best Flame Resistant Shirt for Welding (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1DPSAFETY 7oz FR ShirtBest OverallDPSAFETY 7oz FR Shirt9.6/10View on Amazon
  2. 2BOCOMAL 6.5oz FR ShirtBest LightweightBOCOMAL 6.5oz FR Shirt9.6/10View on Amazon
  3. 3SKSAFETY 7oz FR ShirtBest 7oz PickSKSAFETY 7oz FR Shirt9.6/10View on Amazon
  4. 4Titicaca 7.5oz FR ShirtBest 7.5oz PickTiticaca 7.5oz FR Shirt9.5/10View on Amazon

Welding throws sparks, spatter and radiant heat at everything you wear, and a regular cotton shirt can catch and keep burning. A flame resistant shirt is built to self-extinguish: it chars instead of igniting, which is the difference between a scare and an injury. Every shirt in this guide is 100% cotton with a stated CAT2 arc rating, so the comparison comes down to fabric weight, certifications and fit. Here is how we picked the best flame resistant shirt for welding.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall DPSAFETY 7oz FR Shirt: 7oz cotton with CAT2 arc rating, UL certification and ATPV 9.3 Cal/cm2. Check price on Amazon
  • Best Lightweight BOCOMAL 6.5oz FR Shirt: 6.5oz cotton, NFPA 2112 CAT2, UL certified and arc rated. Check price on Amazon
  • Best 7oz Pick SKSAFETY 7oz FR Shirt: 7oz cotton, CAT2 arc rated and UL certified in a regular fit. Check price on Amazon
  • Best 7.5oz Pick Titicaca 7.5oz FR Shirt: 7.5oz cotton, NFPA 2112 CAT2 with UL label and pearl snaps. Check price on Amazon

The machines

FR Shirt 7oz Fire Resistant Shirts Men's,CAT2

FR Shirt 7oz Fire Resistant Shirts Men's,CAT2

DPSAFETY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

7 oz 100% cotton FR shirt with CAT2 arc rating, UL certification and a stated ATPV of 9.3 Cal/cm2.

Pros

  • Stated ATPV 9.3 Cal/cm2, the only ATPV figure here
  • CAT2 arc rated and UL certified per the listing
  • 7 oz knit cotton for breathability and durability
  • 2 patch pockets and machine washable

Cons

  • No warranty term is stated
  • Listing states no NFPA 2112 reference
  • No stated water or stain resistance
  • No stated safety certification beyond UL
BOCOMAL FR Shirts for Men Button Down Lightweight

BOCOMAL FR Shirts for Men Button Down Lightweight

BOCOMAL9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

6.5 oz 100% cotton FR shirt with NFPA 2112 CAT2 rating, UL certification and arc rating in a relaxed fit.

Pros

  • Lightest fabric of the five at 6.5 oz
  • NFPA 2112 CAT2 with UL certification
  • Arc rated with water stain resistance stated
  • 2 cargo pockets and relaxed fit

Cons

  • No warranty term is stated
  • No ATPV figure stated
  • Lightest fabric offers less coverage per ounce
  • No stated safety certification beyond UL
SKSAFETY FR Shirts for Men

SKSAFETY FR Shirts for Men

SKSAFETY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

7 oz 100% cotton FR shirt with CAT2 arc rating and UL certification in a regular fit.

Pros

  • CAT2 arc rated and UL certified
  • 7 oz 100% cotton fabric
  • Regular fit with 2 patch pockets
  • Machine washable with no-stretch fabric

Cons

  • No warranty term is stated
  • No NFPA 2112 reference stated
  • No ATPV figure stated
Titicaca FR Shirts for Men 7.5oz Snap Button Work

Titicaca FR Shirts for Men 7.5oz Snap Button Work

Titicaca9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

7.5 oz 100% cotton FR shirt with NFPA 2112 CAT2 rating, UL label and pearl snap buttons.

Pros

  • NFPA 2112 CAT2 with UL label stated
  • Heaviest fabric here at 7.5 oz
  • Pearl snap buttons with adjustable cuffs
  • Utility pocket and pre-washed fabric

Cons

  • No warranty term is stated
  • No ATPV figure stated
  • 7.5 oz fabric is heavier than the 6.5 oz and 7 oz shirts
  • No stated arc rating beyond CAT2
TICOMELA Men’s FR Welding Shirt Button-Down 7.5oz

TICOMELA Men’s FR Welding Shirt Button-Down 7.5oz

TICOMELA9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

7.5 oz 100% cotton FR shirt with NFPA 2112 CAT2 rating, preshrunk and wrinkle-free.

Pros

  • NFPA 2112 CAT2 stated on 7.5 oz cotton
  • Preshrunk and wrinkle-free per the listing
  • Relaxed fit with utility pockets
  • Machine washable, no-stretch fabric

Cons

  • No UL certification stated
  • No warranty term is stated
  • No ATPV figure stated
  • No stated arc rating beyond CAT2

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Fabric Weight Rating Certification
DPSAFETY 7oz FR Shirt 9.6/10 100% cotton 7 oz CAT2, ATPV 9.3 Cal/cm2 UL Certified
BOCOMAL 6.5oz FR Shirt 9.6/10 100% cotton 6.5 oz NFPA 2112 CAT2 UL Certified, arc rated
SKSAFETY 7oz FR Shirt 9.6/10 100% cotton 7 oz CAT2 UL Certified, arc rated
Titicaca 7.5oz FR Shirt 9.5/10 100% cotton 7.5 oz NFPA 2112 CAT2 UL Label
TICOMELA 7.5oz Shirt 9.5/10 100% cotton 7.5 oz NFPA 2112 CAT2 Not stated

21 October 2026

Buying guide: the best flame resistant shirt for welding

Start with the ratings. All five listings state CAT2 arc rating; three of those add NFPA 2112, and the DPSAFETY states an ATPV of 9.3 Cal/cm2. UL certification appears on four listings. Fabric is 100% cotton on all five, in weights from 6.5 oz to 7.5 oz. A welding jacket for MIG welding guide covers the heavier outer layer for overhead work.

Then consider the work. A shirt is the base layer of welding PPE: it covers the torso and arms that a jacket leaves exposed at the collar and cuffs, and it is what you wear when the jacket comes off between welds. Every shirt here is long sleeve, machine washable and non-stretch, so the choice comes down to weight, rating and fit.

NFPA 2112, CAT2 and ATPV

NFPA 2112 is the flame resistant garment standard, stated on the BOCOMAL, Titicaca and TICOMELA listings. CAT2 is the arc rating category, stated on all five. ATPV, the arc thermal performance value, is stated only on the DPSAFETY at 9.3 Cal/cm2. More stated ratings mean more verified protection; the DPSAFETY leads because it states the most.

Fabric weight: 6.5 to 7.5 oz

Weight runs 6.5 oz on the BOCOMAL, 7 oz on the DPSAFETY and SKSAFETY, and 7.5 oz on the Titicaca and TICOMELA. All five are 100% cotton with no stretch. The 6.5 oz BOCOMAL is the lightest weight stated; the 7.5 oz Titicaca and TICOMELA are the heaviest weights stated.

Fit and features

Fit splits relaxed (BOCOMAL, TICOMELA) and regular (DPSAFETY, SKSAFETY, Titicaca). Pockets run from 1 cargo pocket on the TICOMELA to 2 on the others. The Titicaca adds pearl snap buttons, adjustable cuffs and pre-washed fabric. Every listing states machine washable. Buy the fit that lets you move at the bench without loose fabric near the arc.

Warranty

No listing here states a warranty term. Every spec table reads “For warranty information about this product, please click here,” which we do not score as a warranty. Buy on the ratings, not the promise.

UL certification

Four listings state UL certification or a UL label: the DPSAFETY, BOCOMAL and SKSAFETY state UL certified, and the Titicaca states a UL label. The TICOMELA states no UL certification. UL certification means a third party verified the claim, which is why the four certified shirts outrank the one that only states the rating. When two shirts state the same CAT2 rating, buy the one with the certification.

Cotton versus blends

All five listings here are 100% cotton, which is the traditional FR shirting fabric: it chars rather than melting, and every listing states machine washable with no stretch. No blends appear in this lineup, so there is nothing to compare on that axis. If you see polyester blends elsewhere, remember that untreated synthetics melt into skin; the 100% cotton construction here avoids that failure mode entirely.

Sizing and tall sizes

Size ranges are generous: the Titicaca lists Medium through 5X-Large including talls, the BOCOMAL lists Small through 6X-Large including talls, the SKSAFETY lists XL through 6XL, and the TICOMELA lists XL through 5XL. The DPSAFETY listing names Large in the title. Tall sizes matter for welders who reach overhead: a shirt that rides up exposes skin to spatter. Check the size chart in the listing images before ordering, as the DPSAFETY listing advises.

Layering with jackets and aprons

The shirt is one layer of the system. For overhead welding, heavy grinding or plasma cutting, add a welding jacket over the shirt and an apron over that. The shirt protects what the jacket leaves open; the jacket takes the direct spatter. Buy the shirt in your normal size so it layers without binding, and keep the cuffs closed: the Titicaca adjustable cuffs are the most cuff-focused detail here.

Pearl snaps versus buttons

Closure details matter in a hot shop. The Titicaca uses pearl snap buttons, which pop open fast if the shirt catches heat and are easy to work with gloves on. The other four use standard buttons. Snaps are the quicker-release option; buttons are the more traditional one. Either works, but the snap detail is a genuine point in the Titicaca favor for welders who have ever needed a shirt off fast.

Pockets

Pocket counts run from 1 cargo pocket on the TICOMELA to 2 on the BOCOMAL, SKSAFETY and DPSAFETY, with the Titicaca listing a utility pocket. Pockets hold soapstone, a tape measure and earplugs, but keep them closed near grinding: an open pocket collects sparks. The patch and cargo styles here are all chest-mounted and out of the direct spatter zone.

Pre-washed and preshrunk

The Titicaca listing states pre-washed fabric and the TICOMELA states preshrunk and wrinkle-free. Cotton shrinks, and a shirt that shrinks after the first wash can pull the cuffs up the wrist. The preshrunk and pre-washed claims mean the size you order is closer to the size you keep. Wash cold the first time regardless, and check the fit before the tags come off.

FAQ for welders

What does CAT2 mean on a welding shirt?

CAT2 is an arc rating category for flame resistant garments. All five shirts here state CAT2, and the DPSAFETY adds a stated ATPV of 9.3 Cal/cm2. Higher stated ratings mean more verified arc protection.

Is a flame resistant shirt fireproof?

No. The DPSAFETY listing states it plainly: flame-retardant clothing slows burning and is not fireproof clothing. It is for environments with ignition risks but no direct contact with open flames.

What weight FR shirt should I buy?

The listings run 6.5 oz to 7.5 oz. The 6.5 oz BOCOMAL is the lightest weight stated; the 7.5 oz Titicaca and TICOMELA are the heaviest weights stated. The 7 oz shirts sit between those stated weights.

Can I wash FR shirts normally?

Every listing states machine wash. Follow the care label: fabric softeners and bleach can degrade flame resistance on some FR fabrics, so check the specific instructions on arrival.

Do I need a welding jacket too?

For overhead welding and heavy spatter, yes: a shirt is the base layer, not the whole system. See the welding jacket for MIG welding guide, and pair either with welding gloves for beginners.

Should the shirt fit loose or snug?

Relaxed enough to move, close enough that nothing dangles near the arc. The BOCOMAL and TICOMELA list relaxed fits; the others list regular fits. Tall sizes help overhead welders keep coverage when reaching up.

Also see our best welding apron for MIG welding. Also see our best welding gloves for fabrication.

Scoring, line by line

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
DPSAFETY 7oz FR Shirt 9.6 29 21 20 8 0
BOCOMAL 6.5oz FR Shirt 9.6 28 21 20 8 0
SKSAFETY 7oz FR Shirt 9.6 28 21 20 7 0
Titicaca 7.5oz FR Shirt 9.5 28 20 20 7 0
TICOMELA 7.5oz Shirt 9.5 28 20 20 7 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides