Best Tube Bender for Aluminum Tubing (2026)
Best tube bender for aluminum tubing: five benders compared on die sizes, bend angles and weight, for clean 180-degree bends without kinking.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR 3/8 to 1 Inch Tube Bender9.7/10View on Amazon - 2
Best Pro PickImperial 370FH Triple Bender9.6/10View on Amazon - 3
Best for Soft AluminumAntstone 3-in-1 Tubing Bender9.6/10View on Amazon - 4
Best LightweightDURATECH 3-in-1 Tubing Bender9.5/10View on Amazon
The best tube bender for aluminum tubing is the one that fits your tube’s outside diameter and wall thickness without kinking it. Aluminum kinks fast in the wrong bender, so match the die or head to the tube you actually run. This guide compares five listings on the stated figures, die sizes, bend angles and weight, ranked by our scores.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall VEVOR 3/8 to 1 Inch Tube Bender: 7 dies cover 3/8 to 1 inch with 0 to 180 degree bends. Check price on Amazon
- Best Pro Pick Imperial 370FH Triple Bender: Triple-head 180-degree bender with Roto-Lok indexing. Check price on Amazon
- Best for Soft Aluminum Antstone 3-in-1 Tubing Bender: 3-in-1 for soft copper and aluminum with stated radii. Check price on Amazon
- Best Lightweight DURATECH 3-in-1 Tubing Bender: 1.01 lb aluminum bender for 1/4 to 3/8 inch tubing. Check price on Amazon
The machines

VEVOR Pipe Tube Bender, 3/8" to 1" OD Manual Pipe
Manual tube bender with 7 dies for 3/8 to 1 inch tubing and 0 to 180 degree bends.
Pros
- 7 stated dies
- 3/8 to 1 inch stated range
- 0 to 2 mm walls stated
- Carbon steel stated
Cons
- 49.4 lb stated weight
- Round pipes only stated
- No warranty term stated
- No stated certifications

Imperial Tool 370FH Triple Head 180 Degree Tube
Triple-head 180-degree tube bender for 3/16 to 1/2 inch soft copper, aluminum and steel.
Pros
- Triple head stated
- Roto-Lok lever stated
- Calibrated markings stated
- Cushion grips stated
Cons
- Max 1/2 inch OD stated
- No warranty term stated
- No stated weight
- No stated certifications

Antstone 1/4” 3/8” 1/2” O.D. Tubing Bender 3 in 1
3-in-1 bender for 1/4 to 1/2 inch soft copper and aluminum with stated bend radii.
Pros
- Soft aluminum stated
- Stated bend radii
- 2.75 lb stated weight
- 0 to 180 degrees stated
Cons
- Soft metals only stated
- Max 1/2 inch OD stated
- No warranty term stated
- No stated certifications

DURATECH 180 Degree Tubing Bender
Lightweight 3-in-1 bender for 1/4 to 3/8 inch thin-wall aluminum and copper tubing.
Pros
- 1.01 lb stated weight
- Calibrated markings stated
- Powder coating stated
- Anti-slip handles stated
Cons
- Max 3/8 inch OD stated
- Thin-wall only stated
- No warranty term stated
- No stated certifications
Other welders and gear to compare
OEMTOOLS 25440 Tube Bender Pliers & Brake Line Bender forCheck price on Amazon
Tnisesm Spring Tube Bender Set 1/4''Check price on Amazon
K&S Precision Metals Tube Bender Set 321Check price on Amazon
3-in-1 Tubing BenderCheck price on Amazon
DURATECH 90 Degree Tubing BenderCheck price on Amazon
Spec sheet comparison
| Model | Shop Score | Sizes | Max OD | Weight | Warranty |
|---|---|---|---|---|---|
| VEVOR 3/8 to 1 Inch Tube Bender | 9.7/10 | 7 dies | 1 in | 49.4 lb | Not stated |
| Imperial 370FH Triple Bender | 9.6/10 | 3 heads | 1/2 in | Not stated | Not stated |
| Antstone 3-in-1 Tubing Bender | 9.6/10 | 3-in-1 | 1/2 in | 2.75 lb | Not stated |
| DURATECH 3-in-1 Tubing Bender | 9.5/10 | 3-in-1 | 3/8 in | 1.01 lb | Not stated |
| Eoppen Spring Tubing Bender Kit | 9.4/10 | 5 springs | 3/4 in | 1.11 kg | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (21 October 2026). No listing states a warranty term, so warranty scores are zero across the board.
Buying guide: the best tube bender for aluminum tubing
Die or head count decides how many tube sizes one tool covers. The VEVOR states 7 bending dies for 3/8, 1/2, 9/16, 5/8, 3/4, 7/8 and 1 inch outside diameters, with a stated 0 to 2 mm wall thickness range and bending radii from 50 to 113 mm. The Imperial 370FH is a triple-head bender for 3/16, 1/4, 3/8 and 1/2 inch tubing with a stated Roto-Lok indexing lever and calibrated markings for left-hand, right-hand and offset bends. The Antstone is a 3-in-1 for 1/4, 3/8 and 1/2 inch soft copper and aluminum with stated bending radii of 0.82, 1.14 and 1.43 inches. The DURATECH is a 3-in-1 for 1/4, 5/16 and 3/8 inch thin-wall tubing with calibrated markings to 180 degrees. The Eoppen is a 5-piece spring kit for 1/4 through 3/4 inch thin-walled tubes.
Wall thickness is the other half of the fit. The Antstone states a wall range of 0.027 to 0.059 inches and warns that walls under 0.059 inches may be damaged. The VEVOR states 0 to 2 mm walls. The DURATECH states thin-wall tubing only, and the Eoppen states thin-walled tubes bent without collapsing. For aluminum, softness is the selling point and the risk: the Antstone is stated for soft copper and aluminum only, while the Imperial and VEVOR state copper, aluminum, brass and steel. All five state 180-degree bends, so angle is not the differentiator; size range and wall range are.
Weight and build round out the choice. The VEVOR states 49.4 lb in carbon steel, a shop-grade machine. The Imperial states die-cast aluminum with cushion grips. The Antstone states an alloy aluminum body at 2.75 lb with a soft rubber handle. The DURATECH states aluminum at 1.01 lb with blue powder coating. The Eoppen states spring steel at 1.11 kg. Heavy wins on rigidity for frequent use; light wins for carrying to the job.
FAQ for welders
Which bender fits the most tube sizes?
The VEVOR, with 7 stated dies covering 3/8 to 1 inch outside diameters. The Eoppen spring kit covers 5 sizes from 1/4 to 3/4 inch.
Which are stated for soft aluminum?
The Antstone is stated for soft copper and aluminum only. The Imperial, VEVOR, DURATECH and Eoppen all state aluminum among their materials.
Which is the lightest?
The DURATECH at a stated 1.01 lb. The Eoppen states 1.11 kg, the Antstone 2.75 lb, and the VEVOR 49.4 lb.
Do all five bend to 180 degrees?
Yes. All five listings state 180-degree bends: the Imperial, VEVOR, Antstone and DURATECH as lever benders, the Eoppen as a spring kit up to 180 degrees.
Do any of these state a warranty?
No. None of the five listings states a warranty term.
Related: the best tube bender for copper pipe, tube bender for brake lines, pipe bender vs tube bender and how to use a tube bender guides.
More guides: tube bender for stainless steel and rotary draw vs mandrel tube bender.
Scoring, line by line
The five benders are scored on performance, build, value, safety and warranty, using only what each listing publishes. The VEVOR earns performance points for its 7 stated dies; the Eoppen spring kit is the thinnest-walled option. No listing states a warranty term, so the ranking comes from the other four criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 3/8 to 1 Inch Tube Bender | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Imperial 370FH Triple Bender | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Antstone 3-in-1 Tubing Bender | 9.6 | 27 | 20 | 21 | n/a | 0 |
| DURATECH 3-in-1 Tubing Bender | 9.5 | 24 | 19 | 21 | n/a | 0 |
| Eoppen Spring Tubing Bender Kit | 9.4 | 23 | 18 | 21 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.






