Best Tube Bender for Copper Pipe (2026)
Three tube benders for copper pipe compared by size range, bend angle and dies, from a 180-degree ratchet kit to forward-reverse kits.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best 180 DegreeSuper Stars 15648499.6/10View on Amazon - 2
Best KitVEVOR Copper Pipe Bender9.6/10View on Amazon - 3
Best ValueVEVOR CT-S999RF9.6/10View on Amazon
For shop tubing work, the best tube bender for copper pipe is the one matched to the tube sizes you run and the bend angle the job needs. These three ratcheting kits all state 7 dies from 1/4 to 7/8 inch, and they differ on angle, weight and included extras.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best 180 Degree Super Stars 1564849: Ratchet bender, 7 dies 1/4 to 7/8 inch, 90 to 180 deg bends, copper and stainless stated. Check price on Amazon
- Best Kit VEVOR Copper Pipe Bender: 7 color dies 1/4 to 7/8 inch, forward and reverse 90 deg, cutter and deburrer included. Check price on Amazon
- Best Value VEVOR CT-S999RF: 7 dies 1/4 to 7/8 inch, forward and reverse ratchet, one-hand operation, cast iron build. Check price on Amazon
The machines
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | Super Stars Tubing Bender Kit 1/4in-7/8in Ratchet | 9.6/10 | Buy on Amazon |
| 2 | VEVOR Copper Pipe Bender | 9.6/10 | Buy on Amazon |
| 3 | VEVOR Tubing Bender Kit, 1/4 to 7/8 Inch | 9.6/10 | Buy on Amazon |

Super Stars Tubing Bender Kit 1/4in-7/8in Ratchet
Ratchet tube bender kit with 7 dies from 1/4 to 7/8 inch, 90 to 180 degree bends, copper and stainless stated.
Pros
- 90 to 180 degree bends stated
- 7 dies from 1/4 to 7/8 inch stated
- Copper, stainless, steel and titanium stated
- One-hand ratcheting with ergonomic handle stated
Cons
- No warranty term stated
- 10.89 lb, the heaviest here
- No stated extras like a cutter
- No reverse bending stated

VEVOR Copper Pipe Bender
Ratcheting copper pipe bender with 7 color dies from 1/4 to 7/8 inch, forward and reverse 90 degrees, cutter and deburrer included.
Pros
- Forward and reverse 90-degree bending stated
- Cutter, deburrer and carrying box included
- 7 color-coded dies stated
- Corrosion-proof aluminum alloy stated
Cons
- No warranty term stated
- Copper and aluminum stated, no brass
- 10 lb stated
- No 180-degree bending stated

VEVOR Tubing Bender Kit, 1/4 to 7/8 Inch
Ratcheting tubing bender kit with 7 aluminum dies from 1/4 to 7/8 inch, forward and reverse, one-hand operation.
Pros
- Forward and reverse bending stated
- 7 aluminum alloy dies stated
- One-hand ratchet operation stated
- Cast iron, steel and aluminum build stated
Cons
- No warranty term stated
- No stated extras
- 9.83 lb stated
- Copper and aluminum stated, no brass
Other welders and gear to compare
3-in-1 Tubing BenderCheck price on Amazon
OEMTOOLS 25440 Tube Bender Pliers & Brake Line Bender forCheck price on Amazon
DURATECH 90 Degree Tubing BenderCheck price on Amazon
K&S Precision Metals Tube Bender Set 321Check price on Amazon
iCrimp 3/4" OD 180 Degree Roller Tubing BenderCheck price on Amazon
Spec sheet comparison
| Tube bender | Sizes | Bend angle | Weight | Dies |
|---|---|---|---|---|
| Super Stars 1564849 | 1/4-7/8 in (7) | 90-180 deg | 10.89 lb | 7 |
| VEVOR Copper Pipe Bender | 1/4-7/8 in (6-22 mm) | 90 deg fwd/rev | 10 lb | 7 |
| VEVOR CT-S999RF | 1/4-7/8 in (6-22 mm) | fwd/rev | 9.83 lb | 7 |
20 October 2026
How to pick the best tube bender for copper pipe
Start with the size range. All three state 1/4 to 7/8 inch with 7 dies: the Super Stars states the same seven dies from 1/4 through 5/16, 3/8, 1/2, 5/8, 3/4 to 7/8 inch, and both VEVOR kits state 1/4 to 7/8 inch (6 to 22 millimeters) with 7 dies. For full coverage across the stated range, any of the three fits.
Then check the bend angle. The Super Stars states a 2-stage design for 90 to 180 degrees without crossing handles. Both VEVOR kits state forward and reverse bending to 90 degrees, which the listings position for tight angles out of a wall. For return bends, the Super Stars is the stated pick.
Mechanism and weight decide the work feel. The Super Stars states a ratcheting mechanism with one-hand operation and an ergonomic handle at 10.89 pounds. The VEVOR kits state manual ratchet handles with ergonomic grips at 10 and 9.83 pounds. No warranty term is stated on any of the three.
Size in the hand matters when the work moves around the shop. The Super Stars package measures 16.65 by 13.35 by 3.66 inches at 10.89 pounds. The VEVOR B0CL6BLP8G lists 12.2 by 5.7 by 5.5 inches at 10 pounds, and the VEVOR CT-S999RF lists 14.96 by 10.24 by 3.54 inches at 9.83 pounds. The smaller stated package suits a crowded bench, while the heavier stated kit suits a fixed bench spot.
One-hand operation matters in confined spaces. The Super Stars states one-hand operation with an ergonomic handle and a release lever. The VEVOR B0CL6BLP8G states an ergonomic handle and a compact design for bending in confined spaces. The VEVOR CT-S999RF states one-hand operation even in tight spaces. For work out of a wall, the stated one-hand format is the feature to check.
Materials are stated on all three. The Super Stars states copper, stainless steel, steel and titanium. The VEVOR kits state copper and aluminum. The VEVOR B0CL6BLP8G adds the most stated extras: a carrying box, deburrer, cutter and two fixed supports.
FAQ for welders
What sizes do these tube benders cover?
All three state 1/4 to 7/8 inch with 7 dies. The VEVOR kits state the range as 6 to 22 millimeters as well. The listings state no larger sizes.
Can these benders do 180-degree bends?
The Super Stars states 90 to 180 degrees with a 2-stage design. The VEVOR kits state forward and reverse bending to 90 degrees.
What is the difference between the two VEVOR kits?
The VEVOR B0CL6BLP8G states color-coded dies plus a cutter, deburrer, carrying box and two fixed supports. The VEVOR CT-S999RF states a cast iron, steel and aluminum alloy build with no stated extras.
Which tube bender states stainless and titanium?
The Super Stars states copper, stainless steel, steel and titanium. The VEVOR kits state copper and aluminum only.
Do any kits include a cutter?
The VEVOR B0CL6BLP8G states a cutter, deburrer, carrying box and two fixed supports among its included components. The other two state no cutter.
Which bender weighs the least here?
The VEVOR CT-S999RF at 9.83 pounds, followed by the VEVOR B0CL6BLP8G at 10 pounds and the Super Stars at 10.89 pounds.
Scoring, line by line
Each bender is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. Safety and warranty score zero across the three because the listings state no safety feature and no warranty term.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Super Stars 1564849 | 9.6 | 32 | 21 | 19 | n/a | 0 |
| VEVOR Copper Pipe Bender | 9.6 | 30 | 21 | 19 | n/a | 0 |
| VEVOR CT-S999RF | 9.6 | 30 | 21 | 18 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




