Metric vs Sae Tap and Die Set: Which One Should You Buy?
The OMT metric set covers M3 to M12, the EilxMag metric set covers M3 to M16, and the VEVOR SAE set covers 1/4 inch to 1 inch, so the right side is the one that matches the fasteners in the shop.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
VEVOR Tap and Die Set, 51-Piece SAE Sizes 1/4 inch9.6/10View on Amazon - 2
EilxMag 110PCS Tap and Die Set9.6/10View on Amazon - 3
OMT Metric Tap and Die Set9.6/10View on Amazon - 4
Anfrere 40pcs SAE Tap and Die Set9.6/10View on Amazon
Verdict. Pick the metric side if the fasteners in the shop are metric, and pick the SAE side if they are inch sizes. The VEVOR SAE set brings the widest stated SAE range, and the EilxMag metric set brings the most pieces.
A stripped thread on a bracket or a bolt that will not start can stall a repair, and the fix is a tap and die set that matches the fastener. This comparison looks at the metric vs sae tap and die set choice through four sets: two metric sets and two SAE sets. The thread standard matters more than the brand, since a metric tap cannot cut an SAE thread and an SAE die cannot chase a metric one.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The four sets
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | VEVOR Tap and Die Set, 51-Piece SAE Sizes 1/4 inch | 9.6/10 | Buy on Amazon |
| 2 | EilxMag 110PCS Tap and Die Set | 9.6/10 | Buy on Amazon |
| 3 | OMT Metric Tap and Die Set | 9.6/10 | Buy on Amazon |
| 4 | Anfrere 40pcs SAE Tap and Die Set | 9.6/10 | Buy on Amazon |

VEVOR Tap and Die Set, 51-Piece SAE Sizes 1/4 inch
A 51-piece SAE tap and die set in sizes from 1/4 inch to 1 inch, with coarse and fine threads, bearing steel heat treated at 1472℉ / 800℃, and a PE storage case.
Pros
- 51 pieces covering SAE sizes from 1/4 inch to 1 inch
- Coarse and fine thread taps and dies in the set
- Bearing steel heat treated at 1472℉ / 800℃
- Includes an adjustable wrench, T-handle tap wrench, die stock, extractor, center punch and screwdriver
Cons
- 13.49 lb, so it stays on the bench rather than riding along
- Sizes stop at 1 inch, so larger SAE threads need another set
- SAE sizes only, so metric fasteners need a metric set
- No thread pitch gauge in the box

EilxMag 110PCS Tap and Die Set
A 110-piece metric tap and die set with taper taps, plug taps and dies from M3 to M16, in hardened alloy steel with a blow-molded carrying case.
Pros
- 110 pieces with taper taps, plug taps and dies
- Sizes from M3 to M16 with coarse and fine pitches
- 35 taper taps, 35 plug taps and 35 dies
- Tapered teeth start threads easily and help prevent overthreading
Cons
- No warranty term is stated
- Steel is named only as hardened alloy steel, with no grade or hardness figure
- No weight is stated, so carrying weight is unclear
- Metric sizes only, so SAE fasteners need an SAE set

OMT Metric Tap and Die Set
A 40-piece metric tap and die set with 34 taps and dies in sizes M3 to M12, in GCr15 bearing steel, with a long-handled tap wrench, two T-handle wrenches, an adjustable die wrench, a screwdriver and a thread pitch gauge.
Pros
- GCr15 bearing steel with heat treatment
- 34 taps and dies covering M3 to M12
- Thread pitch gauge and 1/8 inch screwdriver in the box
- Blow-molded case for storage and portability
Cons
- Sizes stop at M12, so larger metric threads need another set
- Metric sizes only, so SAE fasteners need an SAE set
- No hardness figure is stated
- Tap types are not named as taper or plug

Anfrere 40pcs SAE Tap and Die Set
A 40-piece SAE tap and die set with 17 taps and 17 dies, coarse and fine threads, in GCr15 bearing steel heat treated to 60 HRC, with a carrying case.
Pros
- 60 HRC hardness, the only stated hardness figure here
- 17 SAE taps and 17 SAE dies with coarse and fine threads
- GCr15 bearing steel, CNC machined and heat treated
- Includes a thread gauge, tap handle, die handle, small tap chuck and carrying case
Cons
- No warranty term is stated
- No SAE size range is stated, so the sizes in the box are unclear
- SAE sizes only, so metric fasteners need a metric set
- No heat treatment temperature is stated
Side by side
| VEVOR 51-Piece SAE Set | EilxMag 110-Piece Metric Set | OMT Metric Tap and Die Set | Anfrere 40-Piece SAE Set | |
|---|---|---|---|---|
| Gear Score | 60 | 59 | 58 | 57 |
| Side | SAE | Metric | Metric | SAE |
| Set size | 51 pieces | 110 pieces | 40 pieces | 40 pieces |
| Size range | 1/4 in to 1 in | M3 to M16 | M3 to M12 | Not stated |
| Steel | Bearing steel | Hardened alloy steel | GCr15 bearing steel | GCr15 bearing steel |
| Hardness / heat treatment | Heat treated at 1472℉ / 800℃ | Not stated | Heat treated | 60 HRC |
| Weight | 13.49 lb | Not stated | 3.37 lb | 2.87 lb |
| Case | PE storage case | Blow-molded carrying case | Blow-molded case | Carrying case |
| Warranty | Not stated | Not stated | Not stated | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 November 2026. No listing states a warranty term, and none states a CSA, UL or ETL listing.
metric vs sae tap and die set: sizes and ranges
The metric side covers M3 to M12 in the OMT set and M3 to M16 in the EilxMag set, while the SAE side covers 1/4 inch to 1 inch in the VEVOR set. The Anfrere set does not state its SAE size range, so its sizes are unclear from the listing. A tap and die set is only useful if it holds the sizes the shop actually uses, so match the set to the fasteners on the bench before looking at anything else. The EilxMag size list in the bullets runs from M2 to M18, against the M3 to M16 range in its title, so check the size list before ordering.
Steel and hardness
All four sets name their steel, but the detail differs. The OMT and Anfrere sets are GCr15 bearing steel, and the VEVOR set is bearing steel heat treated at 1472℉ / 800℃. The EilxMag set names only hardened alloy steel, with no grade. Only the Anfrere set states a hardness figure, at 60 HRC, with CNC machined teeth. The EilxMag and VEVOR listings name stainless steel among the metals they work with.
Weight, case and what is in the box
The VEVOR set weighs 13.49 lb, the OMT set weighs 3.37 lb, and the Anfrere set weighs 2.87 lb, while the EilxMag set states no weight. The VEVOR case is a PE storage case with organized compartments, the EilxMag case is a heavy-duty plastic blow-molded carrying case, the OMT case is a blow-molded case, and the Anfrere set comes with a carrying case. The OMT set includes a thread pitch gauge and a 1/8 inch screwdriver, the Anfrere set includes a thread gauge and a small tap chuck, and the VEVOR set includes an extractor, a center punch and a screwdriver.
Choose the metric side if
- The fasteners in the shop are metric.
- You want taper and plug taps in one set, as the EilxMag set provides.
- You want a thread pitch gauge in the box, as the OMT set provides.
- You work on threads from M3 to M16.
Choose the SAE side if
- The fasteners in the shop are inch sizes.
- You want SAE sizes from 1/4 inch to 1 inch, as the VEVOR set provides.
- You want a stated hardness figure, as the Anfrere set provides at 60 HRC.
- You want an extractor and center punch in the box, as the VEVOR set provides.
How the sets were scored
Each set is scored on performance, build, value, safety listing and warranty, with the weights the site publishes on its How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 51-Piece SAE Set | 9.6 | 30 | 21 | 21 | n/a | 0 |
| EilxMag 110-Piece Metric Set | 9.6 | 30 | 20 | 21 | n/a | 0 |
| OMT Metric Tap and Die Set | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Anfrere 40-Piece SAE Set | 9.6 | 28 | 21 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.
Before you strike an arc. Wear eye protection, clamp the work so it cannot turn, and keep gloves away from rotating parts. Check each tap and die for damage on arrival, and confirm the size and pitch match the fastener before cutting. See the OSHA machine guarding page.
FAQ for welders
Should I buy a metric or SAE tap and die set?
Buy the side that matches the fasteners in the shop. Metric sets cut metric threads, and SAE sets cut inch threads, and one cannot substitute for the other. If the shop has both kinds of fasteners, it needs one set of each.
What sizes do the metric sets cover?
The OMT set covers M3 to M12, and the EilxMag set covers M3 to M16. The EilxMag bullet list runs from M2 to M18, so check the size list before ordering.
What sizes does the VEVOR SAE set cover?
The VEVOR set covers SAE sizes from 1/4 inch to 1 inch, with coarse and fine threads. The Anfrere SAE set does not state its size range.
What steel are these tap and die sets made from?
The OMT and Anfrere sets are GCr15 bearing steel, the VEVOR set is bearing steel, and the EilxMag set is hardened alloy steel. Only the Anfrere set states a hardness figure, at 60 HRC.
Do any of these sets state a warranty?
No. None of the four listings states a warranty term. The compare table shows the warranty as not stated for each set.
Related: tapping vs thread milling, tapping types, what is tapping, thread repair kit, best tapping fluid, and the Metal Fab Tools hub.




