Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

What Is Tapping? How Taps Cut Threads

Tapping cuts internal threads in a drilled hole, and this guide explains how taps and dies work, which set fits your shop, and what to check before you cut threads.

What Is Tapping? How Taps Cut Threads
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1toolant 127-Piece Metric & SAE Ratcheting Taptoolant 127-Piece Metric & SAE Ratcheting Tap9.7/10View on Amazon
  2. 2GEARWRENCH 114 Piece Ratcheting Tap and Die SetGEARWRENCH 114 Piece Ratcheting Tap and Die Set9.7/10View on Amazon
  3. 3OMT Tap and Die Set, SAE and Metric Thread RepairOMT Tap and Die Set, SAE and Metric Thread Repair9.6/10View on Amazon
  4. 460-Pc Master Tap and Die Set60-Pc Master Tap and Die Set9.5/10View on Amazon

A bolt hole with stripped threads stops a repair cold, and a bracket with no hole needs one drilled and threaded before a bolt will hold. What is tapping? Tapping is the job of cutting internal threads inside a drilled hole with a tool called a tap, so a bolt can thread straight into the metal. A die does the matching job on the outside of a rod, cutting external threads. This guide explains how taps and dies work, how to pick the right size, and which tap and die set fits a home shop.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

toolant 127-Piece Metric & SAE Ratcheting Tap

toolant 127-Piece Metric & SAE Ratcheting Tap

toolant9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 127-piece SAE and metric set with ratcheting T handles, matching drill bits for each tap, and a one year warranty on the main tool body.

Pros

  • 127 pieces, the largest set here
  • Ratcheting T handles with a 5 degree swing arc
  • Drill bits matched to each tap size
  • One year warranty on the main tool body, 180 days on accessories

Cons

  • Tap size range is not stated, so confirm the sizes cover your work
  • Accessory warranty is 180 days, not the one year of the main body
  • No screw extractors in the box, unlike the GEARWRENCH set
  • No thread pitch gauges are stated in the box, unlike the OMT and EFFICERE sets
GEARWRENCH 114 Piece Ratcheting Tap and Die Set

GEARWRENCH 114 Piece Ratcheting Tap and Die Set

GEARWRENCH9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 114-piece ratcheting set with taps and dies from 4-40 to 3/4 inch and 3 mm to 18 mm, plus 5 screw extractors.

Pros

  • Widest size range here: 4-40 to 3/4 inch SAE and 3 mm to 18 mm metric
  • Ratcheting T handles with a 5 degree swing arc
  • Twist lock guide system keeps dies centered while cutting
  • Includes 5 screw extractors and adapters for 3/8 inch drive

Cons

  • No warranty term is stated; the listing reads no warranty, consumable
  • No drill bits in the box, unlike the toolant set
  • A 114-piece count includes handles, adapters and extractors, not 114 taps and dies
  • Ratcheting handles still need swing room, so tight spots need the extension adapters
OMT Tap and Die Set, SAE and Metric Thread Repair

OMT Tap and Die Set, SAE and Metric Thread Repair

Orion Motor Tech9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 80-piece SAE and metric set with 68 taps and dies in 34 sizes from #4 to 1/2 inch and M3 to M12, with a one year warranty.

Pros

  • 34 sizes, #4 to 1/2 inch and M3 to M12, coarse and fine
  • High-carbon chromium bearing steel
  • Thread pitch gauges, gloves, long and T-handle wrenches and screwdrivers
  • One year warranty

Cons

  • No ratcheting handles; the set uses standard and metric wrenches
  • Taps and dies top out at 1/2 inch and M12, below the GEARWRENCH range
  • No drill bits in the box, unlike the toolant set
  • Two separate blow-molded cases to keep track of instead of one
60-Pc Master Tap and Die Set

60-Pc Master Tap and Die Set

EFFICERE9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 60-piece SAE and metric set in GCr15 bearing steel, heat treated to 60 HRC, with coarse, fine and NPT threads.

Pros

  • GCr15 bearing steel, heat treated to 60 HRC
  • 2 NPT pipe taps and dies at 1/8-27 NPT, the only pipe threads here
  • Tapered teeth start threading more easily
  • Coarse and fine threads from #4 to 1/2 inch and M3 to M12

Cons

  • No warranty term is stated
  • Hand use only; the maker says not to use power tools with these taps and dies
  • Smallest set here at 60 pieces
  • No ratcheting handles; it uses an adjustable tap handle and a T-type handle

What is tapping?

Tapping cuts threads inside a hole. You drill a hole to the tap drill size, then turn a tap into it with a tap wrench. The tap’s cutting teeth carve the thread as it turns, and you back it off to clear chips as you go. A die works the same way on the outside of a rod: the die stock holds the die, and turning it cuts external threads. Tap and die sets hold both tools in SAE and metric sizes, so one box covers the sizes listed for that set.

Threads come in coarse and fine pitches, and the OMT and EFFICERE sets list both. The OMT and EFFICERE sets run from #4 to 1/2 inch SAE and M3 to M12 metric, while the GEARWRENCH set runs wider and the toolant set does not state a range. Match the tap to the bolt size and pitch, and check it with a thread pitch gauge before you cut.

The hole comes first

A tapped hole starts as a drilled hole, and the drill size decides whether the thread cuts clean or binds. A tap drill chart gives the drill for each tap size; the tapping drill chart explains how to read one and pick the right drill. Drill the hole straight, then deburr the edge so the tap starts square.

Cutting fluid helps the tap cut and helps chips move out of the hole. The best tapping fluid guide covers five picks for clean threads, and the best cutting fluid for steel guide covers fluids for drilling, tapping and sawing. A little fluid on the tap helps the teeth run smooth and helps keep them from grabbing.

How a tap cuts threads

Start the tap square to the hole and turn it in with the tap wrench. On the EFFICERE set, tapered teeth help start the thread, then the full teeth follow and cut it to size. Back the tap off to clear chips, then turn forward again. The OMT set’s maker gives the same advice: if the tap jams, reverse to clear chips instead of forcing it.

The EFFICERE set states hand use only, and its maker says power tools can over-torque the tap and damage the threads. Keep the work clamped, wear eye protection, and keep gloves away from anything turning. A tap that snaps in a hole is hard to remove, so a steady hand beats force every time.

The four sets side by side

Set Pieces Size range Handles Warranty Gear Score
toolant 127-Piece Tap and Die Set 127 SAE and metric Ratcheting T handles 1 year, main body 9.7/10
GEARWRENCH 114-Piece Ratcheting Tap and Die Set 114 4-40 to 3/4 in, 3 mm to 18 mm Ratcheting T handles No warranty, consumable 9.7/10
OMT 80-Piece Tap and Die Set 80 #4 to 1/2 in, M3 to M12 Standard wrenches 1 year 9.6/10
EFFICERE 60-Piece Tap and Die Set 60 #4 to 1/2 in, M3 to M12 Adjustable tap handle Not stated 9.5/10

Piece counts run from 60 to 127, and size ranges run from #4 to 1/2 inch SAE and M3 to M12 metric on three sets, with the GEARWRENCH set reaching 3/4 inch and 18 mm. Two sets carry ratcheting T handles, and two carry a stated one year warranty on the main tool. Match the handles and the warranty to the sizes you cut most.

Tap and die sets for your shop

Tapping needs a tap in the size you cut and a wrench to turn it, and the sets below hold taps with handles in one box.

Shop safety for tapping. Clamp the work before you turn a tap, wear eye protection against chips, and keep gloves away from rotating parts. A tap that binds should be backed out and cleared, never forced. See the OSHA machine guarding overview.

FAQ for welders

What is the difference between a tap and a die?

A tap cuts internal threads inside a drilled hole, and a die cuts external threads on the outside of a rod. Tap and die sets hold both, so one box covers threaded holes and threaded rod. Use the tap for the hole and the die for the rod, and match both to the same size.

What size drill bit do I need before tapping a hole?

Each tap size needs a matching tap drill, and the size comes from a tap drill chart rather than the tap itself. The tapping drill chart shows how to read the chart and pick the right drill. Drill the hole straight and deburr the edge before the tap goes in.

Can I use a tap and die set with power tools?

The EFFICERE set states hand use only because its maker says power tools can over-torque the tap and damage the threads. Turn taps and dies with the handles in the box, and reverse to clear chips instead of forcing a jammed tap. A tap wrench gives the control a power tool cannot.

What does coarse and fine thread mean?

Coarse and fine describe the thread pitch, or how far apart the threads sit. The OMT and EFFICERE sets carry coarse and fine threads in SAE and metric sizes, so you can match the pitch of the bolt or nut you are threading. A thread pitch gauge in the box confirms the pitch before you cut.

Do I need cutting fluid when tapping?

Cutting fluid helps the tap cut clean threads and keeps chips moving out of the hole. The best tapping fluid guide covers picks made for threading. A little fluid on each cut helps the tap run smooth, so it is worth the step.

Related: best tap wrench, best tapping fluid, large size tap and die set, and the metal fab tools hub. Also see the tapping drill chart.

More buying guides