Types of Rivet Guns: Which One Should You Buy?
Types of rivet guns compared: hand, cordless, pneumatic and hydraulic, with the sizes each pulls and which type fits shop and farm work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
1001Pcs Rivet Gun Kit Packed in Portable Toolbox 3-Types9.5/10View on Amazon - 2
STANLEY Heavy Duty Contractor Grade Blind Rivet Gun9.8/10View on Amazon - 3
WETOLS Pop Rivet Gun Kit with 200 Blind Rivets9.7/10View on Amazon
A trailer floor needs new rivets, a gate frame has a loose panel, and a toolbox lid wobbles on its hinge. Each job calls for a blind rivet, and a rivet gun is the tool that sets it. Types of rivet guns come down to how the tool pulls the rivet stem: by hand, by battery, by shop air, or by hydraulics. This guide walks through each type, what it handles, and which one fits the work on your bench.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
How a rivet gun sets a blind rivet
A blind rivet has a hollow body and a long stem called a mandrel. You drill a hole through the sheets, push the rivet in, and the gun grips the stem and pulls. The pull swells the body on the far side, where you cannot reach, and clamps the sheets together. The stem then snaps off and drops out, or into a catcher on the back of the gun.
Side by side
| Hand | Cordless | Pneumatic | Hydraulic | |
|---|---|---|---|---|
| Power | Your hands | Battery | Shop air | Hand lever or shop air, through hydraulics |
| Rivet sizes | Not stated | 3/32 to 3/16 inch | 3/32 to 3/16 inch | Large rivets |
| Pull force | Hand strength | 2, 000 lbs | Not stated | Not stated |
| Capacity | Not stated | 450 1/8 inch steel rivets per charge | Continuous on shop air | Not stated |
| Materials | Aluminum and steel | Aluminum, steel, stainless steel | Aluminum, copper, and softer materials | Aluminum and steel |
| Nose pieces | Not stated | Not stated | Four nose pieces included | Not stated |
| Best for | Occasional rivets | Long runs with no air hose | Shop work with air on tap | Large rivets and heavy use |
Swap the nose piece to match the rivet size. The SAKAI pneumatic gun (on Amazon) ships with four nose pieces, one for each size from 3/32 to 3/16 inch, and the Milwaukee cordless kit pulls the same four sizes. A gun that pulls 3/16 inch rivets needs the right nose piece for a smaller rivet, so check what comes in the box before you order.
Hand rivet guns
A hand rivet gun works on squeeze power alone. You grip the handles, the jaw takes hold of the stem, and your grip does the pulling. No battery, no hose, no compressor, so it lives in a toolbox and goes anywhere. That makes it the right pick for a few rivets on a repair, a gate latch, or a patch panel. The trade is effort: a long run of rivets wears out a hand fast, and large steel rivets ask more of your grip than a small aluminum rivet. Long-arm lazy tong riveters give more leverage for the same squeeze, and they fold down for storage.
Our blind rivet pliers vs rivet gun guide compares the plier style with a full rivet gun.
Cordless rivet guns
A cordless rivet gun swaps your grip for a battery and a motor. Milwaukee lists its M12BPRT-0 pop rivet tool at 12 volts, and the 2550-22 kit pulls 3/32, 1/8, 5/32 and 3/16 inch rivets in aluminum, steel and stainless steel. The kit states 2, 000 lbs of pull force, a 0.8 inch stroke, and 450 1/8 inch steel rivets per charge. The kit lists 7.61 pounds. That combination fits long runs away from an air hose: trailer floors, fence panels, and duct work where a hose would drag. The battery is the limit: when the charge runs out, the gun stops, so a spare battery earns its keep on a big job.
Our best heavy duty rivet gun under 100 roundup covers cordless and pneumatic picks.
Pneumatic rivet guns
A pneumatic rivet gun runs on shop air. The SAKAI air hydraulic gun takes air through a 1/4-inch NPT inlet that turns 360 degrees, which helps keep the hose from bending at the fitting. It ships with four nose pieces: 3/16 inch (4.8 mm), 5/32 inch (4 mm), 1/8 inch (3.2 mm) and 3/32 inch (2.4 mm). A rivet catcher sits at the back, with a rotating cup that pours the spent stems out. The trigger action takes little effort, and the gun suits fast work on a bench with air on tap. The maker lists it for rivets in aluminum, copper, and other softer materials, so match the gun to the rivet material before you buy. It needs a compressor and a hose, which keeps it in the shop.
Hydraulic rivet guns
A hydraulic rivet gun uses a hydraulic cylinder to pull the stem. On manual models a hand lever drives the cylinder; air-hydraulic models drive the same cylinder with shop air, like the SAKAI gun in the pneumatic section. The cylinder gives a long, steady pull for large rivets where a hand gun runs out of leverage, and a manual model works with no battery and no air line. The trade is speed and weight: each pull takes longer, and the tool is heavier than a hand gun. That makes it a pick for large rivets and heavy use, not for a quick patch on a toolbox lid.
Rivet nut tools are a different tool
A rivet nut tool looks like a rivet gun, but it sets a threaded insert instead of a blind rivet. The insert stays in the hole and takes a bolt, which suits panels you remove again and again. Do not buy one when the job calls for blind rivets. Our types of rivet nuts guide covers the inserts, and how to use a rivet nut tool shows the setup.
Types of rivet guns: which one should you buy
Match the gun to the job, not the other way around. A hand gun covers a few rivets on a repair and lives in the toolbox. A cordless gun fits long runs away from air, where a hose would drag. A pneumatic gun fits bench work with a compressor already running. A hydraulic gun fits large rivets where a hand gun runs out of leverage. Check the rivet sizes and materials the maker states before you order, and check the nose pieces in the box. Our cordless vs corded rivet gun guide compares the powered types head to head.
Rivet gun safety. A spent stem snaps off with force and can fly, so wear safety glasses when you pull rivets, and point the gun away from people. Clamp the work so it cannot shift, and keep fingers clear of the jaws. Shut off the air supply before you change a nose piece on a pneumatic gun, and keep the hose clear of sharp edges.
FAQ for welders
What size rivet gun do I need?
Match the gun to the rivet size. The Milwaukee cordless kit and the SAKAI pneumatic gun both pull 3/32, 1/8, 5/32 and 3/16 inch rivets, so either covers the common sizes. Check the nose pieces in the box: the SAKAI ships with four, one for each size. A gun that only pulls small rivets will not close a large one.
Can a rivet gun set steel rivets?
Some can. The Milwaukee 2550-22 kit (on Amazon) pulls aluminum, steel and stainless steel rivets. The SAKAI pneumatic gun is listed for aluminum, copper, and other softer materials, so it is not the pick for steel rivets. Match the gun to the rivet material before you buy.
Do I need an air compressor for a pneumatic rivet gun?
Yes. A pneumatic gun takes shop air through a 1/4-inch NPT inlet, so it needs a compressor and a hose. With no air on tap, a cordless gun or a hand gun fits the job better. The SAKAI inlet turns 360 degrees, which helps keep the hose from bending at the fitting.
What is the difference between a rivet gun and a rivet nut tool?
A rivet gun sets a blind rivet that clamps sheets together and leaves no thread behind. A rivet nut tool sets a threaded insert that stays in the hole and takes a bolt. Buy the rivet gun for blind rivets, and see the rivet nut guide for inserts.
How many rivets can a cordless rivet gun set on a charge?
It depends on the gun and the rivet size. The Milwaukee 2550-22 kit states 450 1/8 inch steel rivets per charge. Larger rivets take more pull force, so the count drops as the rivet size grows. Carry a spare battery for a big run.
Related: rivet gun tips, rivet gun parts, blind rivet sizes, how to remove blind rivets, and the metal fab tools hub.




