Cordless vs Corded Rivet Gun: Which One Should You Buy?
Cordless and corded rivet guns set the same blind rivets, but differ on mobility, run time and power source, and this guide compares both sides plus four cordless examples.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Makita XBP03Z 18V LXT Lithium-Ion Cordless Compact Band Saw9.7/10View on Amazon - 2
Heavy Duty Hand RiveterView on Amazon - 3
Dorman 743-100 Hand Rivet GunView on Amazon - 4
Proster Pneumatic Rivet Gun Air Riveters 3924LBF 5 NozzlesView on Amazon - 5
Rivet Gun Set with 3 Sizes Nylon Blind RivetsView on Amazon - 6
Pneumatic Rivet Gun 1/4"View on Amazon - 7
Pneumatic Rivet Gun with 3/32"-1/4" Rivet Heads 4000LBF HeavyView on Amazon
A rivet gun sets blind rivets where a hammer and bucking bar cannot reach, and the choice in cordless vs corded rivet gun comes down to power source. Cordless runs on a battery pack and goes anywhere the work goes, while corded runs on outlet power and never waits on a charge. Where the work moves around the shop or the field, cordless wins on freedom of movement, and where the work stays beside an outlet all day, corded wins on continuous running.
Other welders and gear to compare
Heavy Duty Hand RiveterCheck price on Amazon
Dorman 743-100 Hand Rivet GunCheck price on Amazon
Proster Pneumatic Rivet Gun Air Riveters 3924LBF 5 NozzlesCheck price on Amazon
Rivet Gun Set with 3 Sizes Nylon Blind RivetsCheck price on Amazon
Pneumatic Rivet Gun 1/4"Check price on Amazon
Pneumatic Rivet Gun with 3/32"-1/4" Rivet Heads 4000LBF HeavyCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The difference, briefly
A blind rivet pulls its mandrel until the rivet body expands and the mandrel snaps, so the tool only needs pulling force and a nosepiece that matches the rivet size. A cordless gun carries its power in a battery pack, with a motor, a pulling mechanism and a nosepiece set. A corded gun draws power from an outlet through a cord, so it runs as long as it stays plugged in and never needs a battery swap. The rivet does not care which source pulls it; the difference is mobility, run time and what the shop already owns.
Side by side
| Feature | Cordless | Corded | What it means on the job |
|---|---|---|---|
| Power source | Battery pack | Wall outlet | Cordless needs a charged pack; corded needs an outlet nearby |
| Movement | Free of cords | Tied to the outlet | Cordless suits field, overhead and tight spots |
| Run time | Ends when the pack runs down | Runs while plugged in | Corded suits long bench sessions |
| Rivet sizes in the examples | 1/8, 5/32 and 3/16 inch | Not stated | Every example listing in this guide is cordless |
| Battery platform | DeWalt 20V and Milwaukee 18V in the examples | Not stated | Match the gun to packs already in the shop |
All four example listings in this guide are cordless guns, so the corded column states what a corded gun offers in general terms, with no corded listing to quote. Check the manual of any corded gun for its own pulling force and rivet sizes before buying.
When cordless is the better choice
- Work away from outlets. Field repairs, fence and trailer work, and jobs on a vehicle or a roof, where dragging a cord costs time. One listing names auto repair, metalworking, construction, DIY and home maintenance as its uses.
- Overhead and tight spots. A cordless gun suits overhead tasks and hard to reach areas, where a cord snags.
- A battery platform already in the shop. The examples run on DeWalt 20V and 60V MAX packs or Milwaukee 18V packs, so a shop that owns those packs buys the tool only.
- Long runs on one charge. One listing states up to 2,224 rivets from a single 4.0Ah battery, which the listing presents as power for extended jobs.
When corded is the better choice
- Bench work beside an outlet all day. No battery swaps, no charging breaks, no watching a charge gauge during a long production run.
- Continuous running. A corded gun runs while plugged in, which suits a fixed station near an outlet.
- Shops without battery packs. Every cordless example in this guide is tool only, with no battery or charger included, so a shop without packs faces that extra purchase.
- Simple setup. Plug in and pull rivets, with no packs to charge, store or replace as they age.
Cordless vs corded rivet gun: the cordless examples
The four examples below are all cordless, ordered by warranty term and kit contents as stated on their listings, with pulling force noted for each. They all cover the same three rivet sizes, so the choice comes down to platform, weight and what ships in the box.
Mayoki cordless rivet gun (DeWalt 20V and 60V MAX). The listing states a brushless motor with up to 2248 lbf of pulling force and a 0.79 inch stroke length, and claims up to 2,224 rivets from a single 4.0Ah battery. It works with aluminum and stainless steel rivets in 1/8, 5/32 and 3/16 inch sizes, with quick-change nosepieces swapped using the included wrench, automatic riveting and reverse functions, an LED light and low-voltage protection for the battery. The listing states a 5-year warranty, the longest term among the examples, and lists the tool at 4.02 pounds.
Decwls cordless rivet gun (DeWalt 20V Max). The listing states a brushless motor with pulling force of 2248 lbf to 2698 lbf, the highest force range in this set, and an intelligent self-protection function that shuts the tool down if it overheats. It ships as a kit with 150 rivets, 75 aluminum and 75 stainless, plus 3 tool-free rivet heads in 3.2, 4.0 and 4.8 mm, a wrench, a manual and a rugged case. Automatic ejection on trigger release, a reverse switch, an LED light and an ergonomic grip round out the listing, which states a 2-year warranty and lists the tool at 6.63 pounds, the heaviest example here.
BDJHMP cordless rivet gun (DeWalt 20V MAX). The listing states a brushless motor delivering up to 2000 lbs of pulling force, tool-free nosepiece changes across 1/8, 5/32 and 3/16 inch sizes, and support for alloy, copper, stainless steel, carbon steel, iron and aluminum rivets. One-button forward and reverse switching completes riveting, nail breaking and nail retraction, and a centered switch locks the tool against accidental operation. Note a contradiction in this listing: the bullets state a weight of 3.2 lbs, while the spec table lists 2.38 kg, so treat the weight as uncertain until confirmed. The listing states a 1-year warranty.
Labfintom cordless rivet gun (Milwaukee 18V). The listing states a brushless motor delivering up to 2000 lbs of pulling force, compatibility with Milwaukee 18V batteries, and 3/16, 5/32 and 1/8 inch stainless steel, steel and aluminum rivets, with a maker claim of 3 seconds of fast riveting. Automatic nail pulling and withdrawal run from a single button, with reverse for complete nail withdrawal, plus an LED work light and a heat dissipation system for stable performance. The listing names RV repair, downpipes, construction, telecom work and HVAC among its uses, lists the tool at 5.5 pounds, and states no warranty term.
Rivet mandrels and metal chips. Snapped mandrels and chips can fly when a rivet sets, so wear eye protection and keep the work area clear of loose material. See the safety disclaimer on this site.
FAQ for welders
Do cordless rivet guns pull stainless steel rivets?
Yes, on these listings. The Mayoki listing states aluminum and stainless steel rivets, the Decwls kit includes 75 stainless rivets, the BDJHMP listing names stainless steel among its supported materials, and the Labfintom listing covers stainless steel, steel and aluminum rivets.
Do these cordless rivet guns come with a battery?
No. All four example listings are tool only, with no battery or charger included. Match the gun to a pack already in the shop: DeWalt 20V or 60V MAX for three of the examples, and Milwaukee 18V for the Labfintom gun.
What rivet sizes do the example guns cover?
All four cover 1/8, 5/32 and 3/16 inch rivets, each with three nosepieces or heads for those sizes. That shared range means platform, weight and kit contents decide between them, not rivet size.
Is a corded rivet gun stronger than a cordless one?
No corded listing appears in this guide, so no corded pulling force figure can be quoted here. Pulling force depends on the individual gun, not on the power source alone, and the cordless examples here range from 2000 lbs to 2698 lbf. Check the listing of any gun, corded or cordless, for its own force figure.
How long does a cordless rivet gun run on one charge?
Only one listing states a figure: the Mayoki gun claims up to 2,224 rivets from a single 4.0Ah battery. The other three listings state no rivets per charge, so run time varies with the pack size and the rivet size in use.
Related: best rivet gun kit, and best heavy duty rivet gun.




