Best Heavy Duty Rivet Gun (2026): 5 Picks Compared
Five heavy duty rivet guns, manual and pneumatic, compared on pulling force, rivet sizes and kit contents and ranked by the Gear Score.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCampbell Hausfeld TL0539009.7/10View on Amazon - 2
Most PowerfulFICHFOYE Pneumatic9.7/10View on Amazon - 3
Biggest KitWOBANK Rivet Kit9.6/10View on Amazon - 4
Best for StainlessLIBRATON Heavy-Duty9.6/10View on Amazon - 5
Best One-HandedLIBRATON One-Handed9.6/10View on Amazon
The bracket cracked at the weld and you need it back on the trailer before dark. A rivet gun sets blind rivets fast where a welder cannot reach or the metal is too thin to take heat. The best heavy duty rivet gun for your shop comes down to power source and kit: manual guns for occasional repairs, pneumatic guns for volume. We compared five manual and pneumatic rivet guns on pulling force, rivet sizes, kit contents and warranty, and ranked them with the Gear Score. The five here span both kinds, so you can match the tool to the work.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Campbell Hausfeld TL053900: 2,000 pounds of pull with the only stated warranty here, 1 year limited. Check price on Amazon
- Most Powerful FICHFOYE Pneumatic: 4000 LBF stated pulling force with 5 heads to 1/4 inch and a mandrel bottle. Check price on Amazon
- Biggest Kit WOBANK Rivet Kit: 430 rivets, 4 bits, gloves and a case with chromoly jaws at HRC52-63. Check price on Amazon
- Best for Stainless LIBRATON Heavy-Duty: Stainless rivets to 5/32 inch with a modular, detachable design. Check price on Amazon
- Best One-Handed LIBRATON One-Handed: One-hand operation with 200 rivets and 4 tool-free heads in a case. Check price on Amazon
The machines

Campbell Hausfeld TL053900 Pneumatic Pop Rivet
Pneumatic pop rivet gun with a stated 2,000 pounds of pulling force, 4 nose pieces and a 1 year limited warranty.
Pros
- 2,000 pounds of pulling force stated
- Sets steel rivets up to 3/16 inch
- 1 Year Limited Warranty stated, the only warranty here
- Uses only 0.2 CFM at 90 PSI in continuous operation
Cons
- Needs a 2-gallon or larger compressor, hose and fittings
- Four nose pieces only, no 1/4 inch size
- Spec table lists only the gun under included components
- Rivets are not included

Pneumatic Rivet Gun with 3/32"-1/4" Rivet Heads
Pneumatic rivet gun with a stated 4000 LBF pulling force, 5 rivet heads to 1/4 inch and a mandrel bottle.
Pros
- 4000 LBF (1814 KGF) pulling pressure stated
- 5 rivet heads from 3/32 inch to 1/4 inch
- Compatible with aluminum, steel, stainless steel and iron rivets
- Spare jaws, wrenches and mandrel collection bottle included
Cons
- No warranty term is stated
- Case, compressor, hose, rivets and oil are not included
- Stated weight of 4.6 pounds, the heaviest here
- Jaw life is an estimate of 30,000 to 50,000 rivets, not a guarantee

Rivet Gun with 430 PCS Rivets
Manual rivet gun kit with 430 aluminum rivets, 4 drill bits, gloves and a blow-molded case.
Pros
- 430 aluminum rivets included, the most here
- SCM435 chromoly alloy steel jaws at HRC52-63 stated
- 4 color-coded nosepieces for 3/32 to 3/16 inch rivets
- Gloves and blow-molded case with rivet boxes included
Cons
- No warranty term is stated
- Stated weight of 4.38 pounds with the full kit
- Manual operation only, no pneumatic option
- No stainless or steel rivet compatibility stated

LIBRATON Heavy-Duty Rivet Gun, Pop Rivet Gun Set
Manual heavy-duty rivet gun with 160 aluminum rivets, 4 drill bits and a modular detachable design.
Pros
- Stainless steel rivets to 5/32 inch stated compatible
- Modular, detachable design stated to reduce jamming
- 160 aluminum rivets and 4 drill bits in a storage case
- 4 tool-free interchangeable nozzles
Cons
- No warranty term is stated
- 160 rivets is fewer than the other manual kits here
- Manual operation only, no pneumatic option
- Retightening the nosepiece is on you after repeated use

LIBRATON One-Handed Rivet Gun, Pop Rivet Gun Set
One-handed manual rivet gun with 200 aluminum rivets, 4 drill bits and a removal nozzle in a blow molding box.
Pros
- One-handed operation with a TPR covered handle
- 200 aluminum rivets, 50 per size, plus 4 drill bits
- Removal nozzle included for pulling rivets
- Safety lock and blow molding box for storage
Cons
- No warranty term is stated
- Manual operation only, no pneumatic option
- Aluminum rivets only in the kit
- Retightening the nosepiece is on you after repeated use
Other welders and gear to compare
Heavy Duty Hand RiveterCheck price on Amazon
Dorman 743-100 Hand Rivet GunCheck price on Amazon
Rivet Gun Set with 3 Sizes Nylon Blind RivetsCheck price on Amazon
Proster Pneumatic Rivet Gun Air Riveters 3924LBF 5 NozzlesCheck price on Amazon
Heavy Duty Pneumatic Rivet Gun 3097LBF Air Rivet Gun Set 4Check price on Amazon
Spec sheet comparison
| Rivet gun | Gear Score | Type | Pulling force | Rivet sizes | Kit includes |
|---|---|---|---|---|---|
| Campbell Hausfeld TL053900 | 9.7/10 | Pneumatic | 2,000 pounds | 3/32 to 3/16 in | 4 nose pieces |
| FICHFOYE Pneumatic | 9.7/10 | Pneumatic | 4000 LBF | 3/32 to 1/4 in | 5 heads, wrenches, jaws, bottle |
| WOBANK Rivet Kit | 9.6/10 | Manual | Not stated | 3/32 to 3/16 in | 430 rivets, bits, gloves, case |
| LIBRATON Heavy-Duty | 9.6/10 | Manual | Not stated | 3/32 to 3/16 in | 160 rivets, bits, case |
| LIBRATON One-Handed | 9.6/10 | Manual | Not stated | 3/32 to 3/16 in | 200 rivets, bits, case |
All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026.
Buying guide: the best heavy duty rivet gun
Manual vs pneumatic
Three of the five are manual: both LIBRATON guns and the WOBANK. They need no compressor and suit occasional repairs and field fixes. The FICHFOYE and Campbell Hausfeld are pneumatic, built for volume and repetitive work, but they need shop air. Campbell states a 2-gallon or larger compressor with clean, dry air at 90 PSI through a 1/4-inch hose; FICHFOYE notes the compressor, hose, rivets and pneumatic oil are not included. One-handed manual designs like the LIBRATON and WOBANK let your other hand hold the work, which matters on ladders and under panels.
Pulling force
Only the pneumatic guns state pulling force. FICHFOYE states 4000 LBF (1814 KGF) of pulling pressure, and Campbell Hausfeld states 2,000 pounds of pulling force with hardened-steel jaws. The manual guns state no force figure, so judge them on construction and kit instead. The FICHFOYE listing also gives its figure as 1814 KGF, the only metric equivalent stated here.
Rivet sizes and materials
Four of the five cover 3/32 inch to 3/16 inch rivets; the FICHFOYE adds a 1/4 inch head. For steel rivets, Campbell states its gun sets steel rivets up to 3/16 inch, FICHFOYE lists compatibility with steel and iron rivets, and the LIBRATON heavy-duty listing covers stainless steel rivets up to 5/32 inch. Match the gun to the thickest rivet you plan to set. All five cover the middle sizes, so the choice is really about the extremes: 1/4 inch on the top end, or the smallest kit that covers your work.
Kit contents
The manual kits bundle the consumables: 200 aluminum rivets with the LIBRATON one-handed gun, 160 with the heavy-duty, and 430 with the WOBANK, plus drill bits and cases in all three, and gloves with the WOBANK. The pneumatic guns include nosepieces and, on the FICHFOYE, wrenches, spare jaws and a mandrel bottle, but no rivets. Count what you still need to buy before you pick. If you already own drill bits, the bit counts matter less; if not, the WOBANK pairs its four matched bits with its four nosepieces.
Aluminum vs steel rivets
Most of the rivets in these kits are aluminum: 200 with the LIBRATON one-handed gun, 160 with the heavy-duty, and 430 with the WOBANK. Aluminum suits sheet metal and general repairs where corrosion resistance matters more than sheer strength. For steel, the Campbell gun sets steel rivets up to 3/16 inch, and the FICHFOYE lists steel and iron among its compatible rivet materials. The LIBRATON heavy-duty listing covers stainless steel rivets up to 5/32 inch. Pick the rivet metal for the job first, then check the gun covers it.
Use as directed. Wear eye protection when setting rivets; mandrels snap off with force. Keep fingers clear of the nosepiece, retighten the nosepiece after repeated use as the LIBRATON listings advise, and follow the manual for jaw care on pneumatic guns. Never exceed the rivet sizes the listing states.
FAQ for welders
How do you use a rivet gun?
Drill a hole with the matching bit, fit the right nosepiece for the rivet size, push the rivet through the work, and squeeze the handles or pull the trigger until the mandrel snaps. The manual kits here include drill bits and four nosepieces, so the common sizes are covered out of the case. Keep the gun square to the work so the rivet sets flush. A rivet that sets crooked will not clamp the sheets evenly, so check the fit before you move on.
Can a rivet gun remove rivets?
Setting is its job, not removal. The LIBRATON one-handed kit includes a removal nozzle per its listing. Otherwise, drill the old rivet out with a bit close to the rivet body size and punch out the remains. Go slow so the drill does not wallow out the hole, since an oversized hole weakens the next rivet.
How do I choose between manual and pneumatic?
Pick manual for occasional repairs: no compressor, no hose, and the kits here include rivets. Pick pneumatic for volume work where hand squeezing gets old fast. Just budget shop air too: the Campbell listing wants a 2-gallon or larger compressor at 90 PSI. If you already run air tools, the pneumatic gun slots right into the setup. Pneumatic guns also set each rivet in seconds per the FICHFOYE listing, which adds up on long runs.
How do you clean a rivet gun?
Clear spent mandrels from the nosepiece and wipe the jaws clean after a session. The FICHFOYE includes spare jaws and a mandrel collection bottle, and its listing points to the manual for care and replacement. On the LIBRATON guns, retighten the nosepiece after repeated use, since a loose one can damage the threads. A drop of pneumatic oil now and then keeps air guns running smooth, per the FICHFOYE listing’s maintenance note.
Do I need an air compressor for a pneumatic rivet gun?
Yes. The Campbell Hausfeld listing calls for a 2-gallon or larger compressor with clean, dry air at 90 PSI and a 1/4-inch hose and NPT connection, using only 0.2 CFM in continuous operation. The FICHFOYE listing states the compressor, hose, rivets and pneumatic oil are not included, so plan for those. Manual guns skip all of that and work anywhere.
Related: metal fab tools, rivet guns for steel rivets, heavy duty bench vises and bench vises for metal work.
Scoring, line by line
Each rivet gun is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Rivet guns carry no electrical safety listing, so every gun here scores zero on that criterion; the ranking comes from the other four. Only the Campbell Hausfeld states a warranty term, 1 year limited.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Campbell Hausfeld TL053900 | 9.7 | 30 | 21 | 20 | n/a | 3 |
| FICHFOYE Pneumatic | 9.7 | 34 | 22 | 21 | n/a | 0 |
| WOBANK Rivet Kit | 9.6 | 29 | 21 | 22 | n/a | 0 |
| LIBRATON Heavy-Duty | 9.6 | 29 | 20 | 21 | n/a | 0 |
| LIBRATON One-Handed | 9.6 | 28 | 20 | 21 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




