Corded vs Cordless Angle Grinder: Which One Should You Buy?
Corded grinders state 11,000 RPM for sustained work; cordless grinders trade some speed for battery freedom. Four 4-1/2 inch grinders compared.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
DEWALT Angle Grinder Tool, 4-1/2-Inch, 11-Amp9.2/10View on Amazon - 2
Makita 9557NB 4-1/2" Angle Grinder9.2/10View on Amazon - 3
AOBEN 21V Cordless Angle Grinder 4-1/2 Inch9.2/10View on Amazon - 4
NANWEI Cordless Angle Grinder 4-1/2 Inch9.2/10View on Amazon
Verdict. Pick corded for sustained power: the Makita 9557NB states 11,000 RPM from a 7.5-amp motor with zig-zag varnish protection, and the DEWALT DWE4214 states 11 amps at 11,000 RPM with a dust ejection system and a stated 3-year limited warranty. Pick cordless for freedom of movement: the AOBEN 21V states up to 9500 RPM on a brushless motor with two 4.0Ah batteries, and the NANWEI states 9800 RPM with two 4.0Ah batteries at a stated 3.1 pounds.
Corded vs cordless angle grinder is a power-versus-portability question. Corded grinders run at full power as long as the outlet holds; cordless grinders go anywhere the battery goes. This comparison uses two corded and two cordless 4-1/2 inch grinders as concrete examples, ranked by our scores.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Corded vs cordless angle grinder: the picks

DEWALT Angle Grinder Tool, 4-1/2-Inch, 11-Amp
A corded 4-1/2 inch angle grinder with a stated 11-amp motor at 11,000 RPM, dust ejection system, and a stated 3-year limited warranty.
Pros
- 11 amps at 11,000 RPM stated
- 3-year limited warranty stated
- Dust ejection system stated
- One-touch 360-degree guard rotation
Cons
- Heaviest here at 6.2 pounds
- No safety certification stated
- Corded only, no portability

Makita 9557NB 4-1/2" Angle Grinder
A corded 4-1/2 inch angle grinder with a stated 7.5-amp motor at 11,000 RPM, dust-sealed armature and gears, and an AC/DC switch.
Pros
- 11,000 RPM from a 7.5-amp motor
- Zig-zag varnish seals the armature
- Labyrinth construction seals gears and bearings
- AC/DC switch for alternative power
Cons
- Warranty text has no stated terms
- No safety certification stated
- No accessories stated in the box
- Corded only, no portability

AOBEN 21V Cordless Angle Grinder 4-1/2 Inch
A 21V cordless 4-1/2 inch angle grinder kit with a brushless motor at a stated 9500 RPM, two 4.0Ah batteries, charger and a full accessory set.
Pros
- 9500 RPM brushless motor stated
- Two 4.0Ah batteries with fast charger
- Full kit: discs, guard, handle, case
- Battery level indicator stated
Cons
- 6-speed title against 3-speed gearbox text
- No stated weight
- Other brands' batteries not compatible
- No stated warranty term

NANWEI Cordless Angle Grinder 4-1/2 Inch
A cordless 4-1/2 inch angle grinder with a brushless motor at a stated 9800 RPM, three speed modes, two 4.0Ah batteries and a stated 3.1-pound weight.
Pros
- 9800 RPM with three speed modes
- Brushless motor for runtime stated
- Two 4.0Ah batteries with charger
- 3.1 pounds stated in the bullets
Cons
- Voltage stated as 20V only in the spec table
- No stated warranty term
- No safety certification stated
Other welders and gear to compare
CRAFTSMAN Angle GrinderCheck price on Amazon
Makita GA4570-R 7.5 Amp 4-1/2 in. Corded X-LOCK Angle GrinderCheck price on Amazon
SKIL 6 Amp 4-1/2-Inch Corded Angle GrinderCheck price on Amazon
SKIL 8 Amp 5-Inch Corded Angle Grinder- AG242001Check price on Amazon
DEWALT Die GrinderCheck price on Amazon
Side by side
| Factor | Makita 9557NB (corded) | DEWALT DWE4214 (corded) | AOBEN 21V (cordless) | NANWEI (cordless) |
|---|---|---|---|---|
| Speed (stated) | 11,000 RPM | 11,000 RPM | 9500 RPM | 9800 RPM |
| Power | 7.5 amp, 840 W | 11 amp | 21V, brushless | 20V stated, brushless |
| Weight (stated) | 4.5 lb (bullets) / 2 kg (table) | 6.2 lb | Not stated | 3.1 lb (bullets) / 4.2 lb (table) |
| Batteries | Not applicable | Not applicable | 2 x 4.0Ah | 2 x 4.0Ah |
| Warranty | Not stated | 3-year limited | Not stated | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (20 October 2026). “Not stated” means the listing does not give the figure.
Power and speed
The corded side states the higher RPM: 11,000 RPM on both the Makita (7.5 amp, 840 watts) and the DEWALT (11 amp). The cordless side states 9500 RPM on the AOBEN’s brushless motor and 9800 RPM on the NANWEI’s brushless motor. The DEWALT states an 11-amp AC/DC motor for faster material removal with higher overload protection; the Makita states a 7.5-amp motor with protective zig-zag varnish sealing the armature and labyrinth construction sealing the gears and bearings. The AOBEN states a 3-speed gearbox for different materials alongside its stated 6-speed control, an internal contradiction this guide flags rather than resolves. The NANWEI states three adjustable speed modes. For sustained grinding, the corded listings state the higher speed; for field work, the cordless listings trade some RPM for portability.
Batteries and runtime
The cordless side is a two-battery story on both listings: the AOBEN ships with two 4.0Ah batteries and a fast charger with a battery level indicator, and the NANWEI ships with two 4000mAh batteries and a charger. The AOBEN notes that other brands’ battery packs are not compatible. The NANWEI adds that its spec table marks compatibility with Makita batteries. Neither cordless listing states a runtime figure, so runtime is unclaimed on both. The corded side has no runtime limit by design: the Makita states an AC/DC switch for alternative power sources, and the DEWALT states a lock-on slide switch for extended use.
Weight and handling
The NANWEI states 3.1 pounds in the bullets against 4.2 pounds in the spec table; this guide uses both figures as stated and flags the conflict. The Makita states 4.5 pounds in the bullets, 2 kg in the spec table; the two agree. The DEWALT states 6.2 pounds with a low-profile gear case for tight spaces, a 2-position side handle, and a one-touch guard with 360-degree rotation. The AOBEN states no weight but includes an auxiliary side handle, wheel guard, 6 cutting wheels, a grinding wheel, a flap disc, a polisher pad, 10 P100 sandpapers and a carrying case. Our brushless vs brushed angle grinder comparison covers motor types, and circular saw vs angle grinder for metal covers the cutting choice.
Warranties and certifications
The DEWALT states a 3-year limited warranty, the only concrete warranty term here. The Makita states “1 Year Parts and Labor” with no terms, which this guide does not treat as a concrete term. The AOBEN and NANWEI state no warranty term; their “professional after-sale service” and “excellent after-sales service” language is not a stated term. No listing states a safety certification. The DEWALT also states a dust ejection system that ejects dust and debris through the air intake vents, and quick-change wheel release for tool-free wheel removal.
Choose corded if
- You grind for long sessions: full power with no battery to swap.
- You want the stated 11,000 RPM of the Makita or DEWALT.
- You want the only stated warranty: 3 years limited on the DEWALT.
- You value the Makita’s stated dust sealing and the DEWALT’s dust ejection.
Choose cordless if
- You work away from outlets: 21V (AOBEN) or 20V (NANWEI) battery power.
- You want the brushless motors stated on both the AOBEN and NANWEI.
- You want the stated 9800 RPM of the NANWEI or 9500 RPM of the AOBEN.
- You want two batteries and a charger in the box, stated on both.
FAQ for welders
Which is more powerful?
By stated RPM, the corded side: 11,000 RPM on both the Makita and the DEWALT, against 9500 on the AOBEN and 9800 on the NANWEI.
How many batteries come with the cordless ones?
Two 4.0Ah batteries with a charger, stated on both the AOBEN and the NANWEI.
Which have a stated warranty?
The DEWALT states a 3-year limited warranty. The others state no concrete warranty term.
Which is lightest?
The NANWEI states 3.1 pounds in its bullets (4.2 pounds in its spec table). The Makita states 4.5 pounds in its bullets, 2 kg in its spec table; the two agree. The DEWALT states 6.2 pounds; the AOBEN states no weight.
Do the cordless ones accept other brands’ batteries?
The AOBEN states other brands’ packs are not compatible. The NANWEI spec table marks compatibility with Makita batteries.
Related: brushless vs brushed angle grinder, best angle grinder for cutting rebar, and cut off tool vs angle grinder.
Scoring, line by line
Each grinder is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DEWALT DWE4214 11-Amp Angle Grinder | 9.2 | 10 | 11 | 11 | 0 | 3 |
| Makita 9557NB 4-1/2 in Angle Grinder | 9.2 | 10 | 11 | 10 | 0 | 0 |
| AOBEN 21V Cordless Angle Grinder Kit | 9.2 | 9 | 10 | 10 | 0 | 0 |
| NANWEI Cordless Angle Grinder Kit | 9.2 | 9 | 10 | 9 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




