Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Brushless vs Brushed Angle Grinder: Which One Should You Buy?

Brushless vs brushed angle grinders explained for welders, with four brushless cordless grinders ranked.

Brushless vs Brushed Angle Grinder: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1DEWALT Angle Grinder ToolDEWALT Angle Grinder Tool9.7/10View on Amazon
  2. 2DCA Cordless Angle Grinder 4-1/2 inchDCA Cordless Angle Grinder 4-1/2 inch9.7/10View on Amazon
  3. 3DEWALT Angle Grinder ToolDEWALT Angle Grinder Tool9.7/10View on Amazon
  4. 4Milwaukee ElectricMilwaukee ElectricView on Amazon
  5. 5Makita XAG09Z 18V LXT Lithium-Ion Brushless CordlessMakita XAG09Z 18V LXT Lithium-Ion Brushless CordlessView on Amazon

Brushless vs brushed angle grinder is the motor question behind every cordless grinder. A brushless motor skips the carbon brushes, so more battery goes to the disc and there are no brushes to wear out; a brushed motor costs less up front and suits occasional use. All four grinders below are brushless, so this guide explains both sides and ranks the brushless examples by what each listing states.

Other welders and gear to compare

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The difference in one paragraph

A brushed motor feeds current through carbon brushes that press on the spinning commutator; the brushes wear and waste energy as heat. A brushless motor drops the brushes and commutates electronically, which the listings describe as higher efficiency, longer service life and less battery damage. That is why every pick here is brushless: for a grinder that earns its keep on welds, the motor type matters.

Side by side

Brushless Brushed Verdict
Motor No carbon brushes Carbon brushes that wear Brushless
Runtime per charge Longer, less energy lost as heat Shorter Brushless
Maintenance No brush changes Brushes need replacing Brushless
Upfront cost Higher Lower Brushed
Best for Daily grinding, long sessions Occasional use, tight budget Depends on use

Every listing below is brushless, so compare them on RPM, battery, kit contents and warranty.

When brushless is the better choice

  • Daily grinding. Bevels, weld cleanup and cutting disc work, day after day. The AOBEN listing describes overload and overheating protection, and the DCA listing describes vents that protect the motor from overheating damage, for long sessions.
  • Battery life. The listings describe brushless as more efficient, so the charge lasts longer on the same amp-hours.
  • No brush maintenance. Nothing to inspect or replace.

When brushed is the better choice

  • Tight budget. Brushed grinders cost less up front.
  • Occasional use. A few cuts a month will not wear brushes out fast enough to matter.
  • Corded shop work. On a cord, the efficiency gap matters less than on battery.

Brushless vs brushed angle grinder: four brushless picks, ranked

1. DCA 20V Brushless

The DCA is a 20V brushless 4-1/2 in grinder at 8500 RPM and 630W, with a 4.0Ah battery, a 2A charger with 2-hour fast charging and a battery display. It lists a tool-free guard, a 2-position shock-absorbing handle, 6 discs, a carrying bag and a 7/8 in arbor with an M14 spindle, at 5.5 lb. The listing states a 2 year warranty. Who it suits: a welder who wants the full kit with a stated warranty.

2. AOBEN 21V Brushless Kit

The AOBEN is a 21V brushless 4-1/2 in grinder at 9500 RPM with 2 x 4.0Ah batteries, a fast charger, a lock-on switch and a battery level indicator. The kit ships 19 discs, guards, a handle, a wrench and a tool case, with overload and overheat protection stated. The title says 6-speed while the bullets say a 3-speed gearbox; trust the title and confirm. No warranty term is stated. Who it suits: the biggest kit here for cutting, grinding and polishing.

3. Milwaukee M18 Brushless 2686-20

The Milwaukee is an 18V brushless 4-1/2 / 5 in cut-off grinder at 11000 RPM with a paddle switch, tool-free guard adjustment, overload protection and an electronic clutch. The table lists 12.87 x 10.71 x 4.29 in and a weight of 3.75 ounces, which reads as a listing error for a grinder this size. The warranty field says Manufacturer Warranty with no term. Who it suits: Milwaukee M18 owners who want the fastest RPM here.

4. VERVEWAVE 20V Brushless, Tool Only

The VERVEWAVE is a brushless 4-1/2 in grinder compatible with DEWALT 20V batteries, at 8500 RPM with 6 speeds from 3000 to 8500 RPM. It lists a lock switch, soft start, power failure protection, a 3-position handle and 11 cutting and grinding wheels. The battery and charger are not included. No warranty term is stated. Who it suits: DEWALT 20V owners who want a spare grinder body.

What to check before you buy

Match the battery platform: the DCA and AOBEN ship batteries and chargers, the VERVEWAVE is tool only for DEWALT 20V, and the Milwaukee listing names the tool without a battery. Check the RPM against your discs: 9500 on the AOBEN, 11000 on the Milwaukee, 8500 on the DCA and VERVEWAVE. Only the DCA states a warranty term, 2 year. And whatever grinder you run, wear a face shield and gloves, keep the guard on and the disc rated above the grinder’s RPM.

Grinder sparks and discs. Cutting and grinding throw sparks and can shatter a damaged disc. Wear a face shield over safety glasses, keep bystanders clear, clamp the work, and never remove the guard. See the OSHA welding overview.

Switches, guards and clutches

The small hardware changes how the grinder feels in use. The Milwaukee 2686-20 states a paddle switch design, tool-free guard adjustment, overload protection and an electronic clutch, at 11,000 RPM. A paddle switch sits under the hand and drops the motor when released; tool-free guard adjustment means no wrench hunt when the cut direction changes. The VERVEWAVE stores its wrench inside the side handle, a small detail that keeps the wrench with the tool. The AOBEN ships an auxiliary side handle and a wheel guard in the kit. Read the switch type and guard setup before you buy: they are the parts your hands touch every cut.

Kit or tool only: the full box

Two of these ship as full kits and two do not. The AOBEN 21V kit lists two 4.0Ah batteries, a charger, a side handle, a wheel guard, cutting wheels, a grinding wheel, a flap disc, a polishing pad, sandpapers and a carrying case: cutting, grinding, sanding and polishing out of the box. The DCA ships one 4000mAh battery with 2H fast charging at 8500 RPM. The VERVEWAVE is tool only, with no battery or charger, and states compatibility with DEWALT 20V lithium-ion batteries from the DCB200 through the DCB240 series: it suits a reader who already owns that platform. The Milwaukee listing names the tool without a battery. Match the box to the battery shelf: a kit costs more but a tool only costs you a dead grinder if no pack fits it.

FAQ for welders

Is brushless worth it on an angle grinder?

For regular use, yes: the listings describe longer runtime, longer motor life and no brush changes. For occasional cuts, a brushed grinder costs less and does the job.

Which of these state a warranty?

Only the DCA, a 2 year term. The other three listings state no warranty term.

Which is the fastest here?

The Milwaukee at 11000 RPM, then the AOBEN at 9500 RPM. The DCA and VERVEWAVE list 8500 RPM.

Do any of these ship batteries?

The DCA ships one 4.0Ah battery and a charger; the AOBEN ships two 4.0Ah batteries and a charger. The VERVEWAVE is tool only, and the Milwaukee listing names the tool without a battery.

Related: the best angle grinder for beginners, our cut off tool vs angle grinder comparison and our die grinder vs angle grinder guide.

More buying guides