Best Angle Grinder for Cutting Rebar (2026)
One brushless grinder and three disc sets for cutting rebar, compared by stated RPM, disc type, arbor and safety features.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Top PickMilwaukee M18 Grinder9.5/10View on Amazon - 2
Longest-Life DiscONEGOTOOL Diamond Disc9.4/10View on Amazon - 3
Biggest SetPRETEC 26-Pc Disc Set9.4/10View on Amazon - 4
Multi-MaterialFOXBC Diamond Disc 3Pk9.4/10View on Amazon
The footer forms are up and the rebar needs cutting to length before the pour. The best angle grinder for cutting rebar is really two purchases: a grinder with the guts to spin all day and a disc that eats steel without shattering. This guide ranks one brushless grinder and three disc sets by what their listings state: RPM, disc type, arbor, safety features and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Top Pick Milwaukee M18 Grinder: Brushless 18V grinder at 11,000 RPM with electronic clutch and overload protection. Check price on Amazon
- Longest-Life Disc ONEGOTOOL Diamond Disc: Diamond-edged 4.5 in discs rated 12,200 RPM; maker claims 5000+ steel bar cuts. Check price on Amazon
- Biggest Set PRETEC 26-Pc Disc Set: 26 pieces: twenty cut-off wheels plus flap and grinding discs in one box. Check price on Amazon
- Multi-Material FOXBC Diamond Disc 3Pk: Diamond-rimmed discs with 5/8 in bushing for metal through tile. Check price on Amazon
The machines

Milwaukee Electric - M18TRADE BRUSHLESS 4-1/2 / 5
An 18V brushless 4-1/2 / 5 in cut-off grinder at 11,000 RPM with paddle switch, electronic clutch and overload protection.
Pros
- Brushless, 11,000 RPM
- Electronic clutch plus overload protection
- Paddle switch, tool-free guard adjustment
- Takes 4-1/2 or 5 in discs
Cons
- Table lists 3.75 ounces, nonsense for a grinder
- No battery or charger in the box per the listing
- No warranty term stated
- Thin listing, few details

4-1/2 inch Indestructible Cutting Discs for Angle
A 3-pack of 4.5 in diamond-edged cutting discs with 7/8 in arbor, rated 12,200 RPM max.
Pros
- Diamond edge on manganese steel
- Maker claims 5000+ steel bar cuts
- 12,200 RPM max rating
- 3-pack, serrated for smooth cuts
Cons
- No warranty term stated
- Life claims are the maker's own
- Also targets marble, tile and plastic, not rebar alone
- Single disc type, no variety

26 Packs Angle Grinder Cutting Flap Grinding Disc
A 26-piece set: twenty 4.5 in cut-off wheels, three 60-grit flap discs and three grinding wheels.
Pros
- 26 pieces across three disc types
- Cut-off wheels rated 13,000 RPM max
- Flap and grinding discs included
- Storage box in the set
Cons
- No warranty term stated
- Consumables, not long-life discs
- Heaviest box at 2.8 lb

FOXBC 4-1/2 Inch Indestructible Multi-Material Cut
A 3-pack of 4.5 in diamond-rimmed cut-off discs with 7/8 in arbor and 5/8 in bushing.
Pros
- Diamond rim on a solid steel body
- 5/8 in bushing included
- Open slot design for dust and heat
- 3-pack of 4.5 in diamond discs
Cons
- No max RPM stated
- 100X life claim is the maker's own
- No warranty term stated
- Thinnest listing of the four
Other welders and gear to compare
Ryobi 5133001903 R18AG-0 One+ Cordless Angle Grinder AngledCheck price on Amazon
Makita 9557PBX1 4-1/2" Paddle Switch Cut-Off/Angle GrinderCheck price on Amazon
The picks at a glance
| Model | Gear Score | Type | Disc size | Max RPM | Arbor | Warranty |
|---|---|---|---|---|---|---|
| Milwaukee M18 Grinder | 9.5/10 | Cut-off grinder | 4-1/2 / 5 in | 11,000 | Not stated | Not stated |
| ONEGOTOOL Diamond Disc | 9.4/10 | Diamond cut-off | 4.5 in | 12,200 | 7/8 in | Not stated |
| PRETEC 26-Pc Disc Set | 9.4/10 | Bonded/flap/grinding | 4.5 in | 13,000 | 7/8 in | Not stated |
| FOXBC Diamond Disc 3Pk | 9.4/10 | Diamond cut-off | 4.5 in | Not stated | 7/8 in (+5/8 bushing) | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (19 October 2026). Where a listing contradicts itself, both figures are shown.
Best angle grinder for cutting rebar: what the listings tell you
One listing sells the grinder; three sell the discs. The Milwaukee grinder states 11,000 RPM, brushless, with a paddle switch, electronic clutch and overload protection. Disc ratings run 12,200 and 13,000 RPM max, both above the grinder’s speed. Arbors are 7/8 in across the discs, with a 5/8 in bushing in the FOXBC box. Two listings contradict themselves: the PRETEC bullets say 1/25 in thin against the title and table’s 1/4 in, and the Milwaukee table lists 3.75 ounces for a grinder. No listing states a warranty term or a safety listing.
Buying guide: rebar cutting setup
The grinder
One pick here is the tool itself: the Milwaukee M18 brushless cut-off grinder at 11,000 RPM, taking 4-1/2 or 5 in discs. The listing names a paddle switch, tool-free guard adjustment, overload protection and an electronic clutch. The box contents name the grinder only, with no battery or charger stated. For rebar, the clutch and the guard matter more than raw RPM.
Cut-off wheels vs diamond blades
The PRETEC set brings twenty bonded 4.5 in cut-off wheels plus flap and grinding discs: consumables you burn through. The ONEGOTOOL and FOXBC are diamond-edged steel discs the makers claim last far longer. ONEGOTOOL claims 5000+ steel bar cuts and longer life than 100 resin wheels; FOXBC claims up to 100X the life of a bonded disc. Those are the makers’ claims, not measured figures. Bonded wheels cut fast and die young; diamond costs more up front.
Match the RPM
A disc must be rated at or above the grinder’s RPM. The Milwaukee spins 11,000 RPM; the PRETEC discs are rated 13,000 and the ONEGOTOOL 12,200, so both clear it. The FOXBC listing states no max RPM, which is a gap worth noting before it meets an 11,000 RPM spindle.
Disc wear and replacement
Bonded wheels wear down as they cut, which is why the PRETEC box holds twenty of them. The ONEGOTOOL listing says its diamond blade’s outer diameter does not wear down during cutting and produces little dust; the FOXBC listing credits its open slot design with less dust and heat. Swap a bonded wheel when cuts slow down or the wheel looks thin. A fresh wheel is cheaper than a stalled cut, and a worn wheel is the one most likely to fail.
Arbor and fit
All three disc sets are 4.5 in with a 7/8 in arbor. The FOXBC adds a 5/8 in bushing in the box. The Milwaukee takes 4-1/2 or 5 in discs per its title. Do not put a larger disc on a smaller grinder.
Around the sparks. Cutting rebar throws sparks and sharp cutoff ends. Keep the guard on the grinder, wear eye and face protection, and keep flammables clear of the spark stream. Let the disc do the work; forcing it is what breaks bonded wheels.
FAQ for welders
Can I cut rebar with an angle grinder?
Yes, with a cut-off disc rated for the grinder’s RPM. The ONEGOTOOL listing names steel bars and rebar explicitly, and the PRETEC set is built around metal and stainless cut-off wheels. Use the guard and let the disc cut.
Cut-off wheel or diamond blade for rebar?
Bonded cut-off wheels are cheap and fast; the PRETEC box holds twenty. Diamond blades cost more per disc but the makers claim far longer life: 5000+ cuts per ONEGOTOOL, 100X a bonded disc per FOXBC. Those are maker claims. For a few cuts, bonded; for a whole foundation, diamond starts to make sense.
What size disc do I need?
All three disc sets here are 4-1/2 in with a 7/8 in arbor, matching the Milwaukee’s 4-1/2 / 5 in capacity. Do not put a larger disc on a smaller grinder.
How long does a disc last?
The ONEGOTOOL listing claims 5000+ steel bar cuts per blade and longer life than 100 resin wheels; the FOXBC claims up to 100X a standard bonded disc. The PRETEC set sidesteps the question with twenty cut-off wheels in the box. Treat all three as maker claims.
Does the Milwaukee come with a battery?
The listing’s box contents name the grinder only, with no battery or charger stated. It is an 18V M18 tool, so bring your own pack.
Related: best angle grinder for cutting metal, best angle grinder for beginners, best angle grinder.
Scoring, line by line
Each pick is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None of the four listings states a safety listing or a concrete warranty term, so all score zero on safety and warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Milwaukee M18 Grinder | 9.5 | 30 | 21 | 20 | 0 | 0 |
| ONEGOTOOL Diamond Disc | 9.4 | 28 | 20 | 20 | 0 | 0 |
| PRETEC 26-Pc Disc Set | 9.4 | 27 | 20 | 20 | 0 | 0 |
| FOXBC Diamond Disc 3Pk | 9.4 | 27 | 20 | 19 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




