Rivet Gun Parts and What Each Does
The nosepiece, jaws, handle and mandrel each do one job on a rivet gun, and the kits here cover the common sizes for shop and home work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Hand Rivet Gun Kit with 100 Blind Rivets9.7/10View on Amazon - 2
WETOLS 3 in 1 Rivet Gun with 5 Rivet Heads9.7/10View on Amazon - 3
UistMek Pop Rivet Gun Kit9.7/10View on Amazon - 4
Pop Rivet Gun Tool Kit with 100 Pcs Blind Rivets9.5/10View on Amazon
A sheet metal patch needs a rivet, and the gun in the hand will not set it. The nose is wrong for the rivet, the jaws will not grip the mandrel, or the handle will not close with enough pull. Each of those failures traces back to rivet gun parts: the nosepiece, the jaws, the handle and the mandrel, and how they match the rivet in the hole. This guide names each part, says what it does, and shows kits that cover the common sizes for shop and home work.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Hand Rivet Gun Kit with 100 Blind Rivets
A hand rivet gun with a 90 degree head for tight spots, 4 interchangeable heads, 100 blind rivets and a 2 year manufacturer warranty.
Pros
- 90 degree head reaches behind dashboards, under fenders and inside electrical panels
- 4 interchangeable heads in 3/32, 1/8, 5/32 and 3/16 inch, with 25 rivets per size
- Aluminum alloy body with a heat-treated carbon steel handle
- Handles aluminum, steel and stainless steel rivets
Cons
- No mandrels or rivet nuts, so threaded inserts need a separate tool
- Grip range is not stated
- Handle length is not stated
- 100 rivets in the box, fewer than the 180 in the UistMek kit

WETOLS 3 in 1 Rivet Gun with 5 Rivet Heads
One tool that works as a rivet gun, a rivet nut tool and a reamer, with 5 rivet heads, 6 mandrels, 60 rivet nuts, 50 rivets and a blow molded case.
Pros
- Three tools in one: rivet gun, rivet nut tool and reamer
- 6 mandrels in M5, M6, M8, 10-24, 1/4-20 and 5/16-18
- 5 rivet heads from 3/32 to 1/4 inch, stored on the handle and sleeve
- 60 rivet nuts and 50 rivets in a blow molded case
Cons
- 6.4 mm head is not recommended for steel or stainless steel rivets
- No warranty term is stated
- 50 rivets in the box, fewer than the other kits here
- No drill bits in the box

UistMek Pop Rivet Gun Kit
A heavy duty hand riveter with 180 aluminum blind rivets, 4 nosepieces, 4 drill bits, spare jaws and a storage case, on a 10.5 inch handle.
Pros
- 180 aluminum blind rivets in 8 sizes, with 4 matching drill bits
- Spare jaws and spring included, plus a straight-through jaw channel that releases broken mandrels
- 10.5 inch handle gives more leverage on thicker material
- Tool also handles steel and stainless steel rivets
Cons
- No warranty is included
- 2.2 lb weight, heavier than the 0.95 lb HOLAPUZZLE kit
- Aluminum rivets only in the box; steel rivets need a separate buy
- Grip lengths run 1/4 to 5/8 inch, so longer grips need other rivets

Pop Rivet Gun Tool Kit with 100 Pcs Blind Rivets
A hand riveter with 100 aluminum rivets in 4 sizes, 4 nosepieces, a 0.5-3 mm grip range and a handle lock, with 1 year of product support.
Pros
- 100 aluminum rivets, 25 in each of 4 sizes
- Grip range of 0.5-3 mm stated in the listing
- Handle lock, wrench and manual in the box
- Simple operation design for users with minimal experience
Cons
- Works with aluminum body rivets only, not stainless steel rivets
- No storage case in the box
- No drill bits included
- Grip range tops out at 3 mm, so thicker material needs other rivets
Rivet Gun Parts and What Each Does
The nosepiece is the cone at the front of the gun, and its bore matches the rivet diameter. Every kit here carries heads for 3/32, 1/8, 5/32 and 3/16 inch rivets, and the WETOLS kit (on Amazon) adds a 1/4 inch head. A head that is too large lets the rivet wobble, and a head that is too small will not let the rivet through, so the head and the rivet must match.
Behind the nosepiece sit the jaws. They grip the mandrel, the stem that runs through the rivet, and pull it until the rivet body swells and the mandrel snaps. The UistMek kit (on Amazon) states an aligned nosepiece and a straight-through jaw channel that releases the broken mandrel after each pull, with spare jaws and a spring in the box.
The handle sets the leverage. The UistMek handle runs 10.5 inches, which multiplies pull on thicker material, and its textured grips stay put in the hand. The HOLAPUZZLE kit (on Amazon) adds a 90 degree head for work behind dashboards, under fenders and inside electrical panels, where a straight gun cannot reach.
A rivet nut tool swaps the nosepiece for a mandrel that threads into a rivet nut, which then anchors in sheet too thin for a tapped hole. The WETOLS kit ships 6 mandrels in M5, M6, M8, 10-24, 1/4-20 and 5/16-18, with 60 rivet nuts in the case. The same kit carries a reamer, which cleans and sizes a drilled hole before the rivet goes in.
Match the Part to the Rivet
Rivet material decides which kit fits. The HOLAPUZZLE and UistMek tools handle aluminum, steel and stainless steel rivets, while the OSTAGAR kit (on Amazon) works with aluminum body rivets only and is not intended for stainless steel rivets. The WETOLS maker notes the 6.4 mm head is not recommended for steel or stainless steel rivets. See our steel vs aluminum blind rivets guide for how each material behaves.
Grip range is the thickness the rivet can clamp. The OSTAGAR kit states a grip range of 0.5-3 mm (0.02-0.12 in), and the maker says thicker material calls for rivets of the right size. The UistMek kit states grip lengths from 1/4 to 5/8 inch across its 8 sizes. Match the rivet length to the metal stack, not to the gun.
The Kits Side by Side
| Gear Score | Nosepieces | Rivets in the Box | Grip Range | |
|---|---|---|---|---|
| HOLAPUZZLE Hand Rivet Gun | 9.7/10 | 4 | 100 | Not stated |
| WETOLS 3-in-1 WE-890 | 9.7/10 | 5 | 50 rivets, 60 rivet nuts | Not stated |
| UistMek Pop Rivet Gun UM-RV-2026 | 9.7/10 | 4 | 180 | 1/4 to 5/8 in |
| OSTAGAR Pop Rivet Gun RG01 | 9.5/10 | 4 | 100 | 0.5-3 mm |
The table above lines up the kits on heads, rivets in the box and grip range. The WETOLS kit is the only one that sets rivet nuts, the HOLAPUZZLE kit is the only one with a 90 degree head, and the UistMek kit is the only one that ships drill bits. Pick by the part you need, not by the rivet count alone.
Rivet Gun Parts in the Kits
The kits below cover the parts the guide names above, from the nosepiece that sizes the rivet to the mandrel that sets a rivet nut.
What to Check When the Kit Arrives
Count the heads first. The WETOLS kit should hold 5 rivet heads and 6 mandrels, and the other kits hold 4 nosepieces each. Then count the rivets: 50 in the WETOLS case with 60 rivet nuts, 100 in the HOLAPUZZLE and OSTAGAR kits, and 180 in the UistMek case with 4 drill bits.
Work the handle and check the lock on the OSTAGAR kit, then fit a head and confirm it seats without tools on the WETOLS kit. The OSTAGAR maker revised the manual and offers a digital version on request, which covers mandrel grip failure and mandrel jam issues. Keep the manual with the case so the sizes stay with the tool.
FAQ for welders
What does each part of a rivet gun do?
The nosepiece sizes the rivet and guides it into the hole, the jaws grip the mandrel and pull it until the rivet swells, and the handle supplies the leverage. On a rivet nut tool, the mandrel threads into the nut and pulls it tight in the sheet. The reamer in the WETOLS kit cleans and sizes the hole before the rivet goes in.
Which nosepiece fits a 1/8 inch rivet?
Use the 1/8 inch head. Every kit here carries heads for 3/32, 1/8, 5/32 and 3/16 inch rivets, so the 1/8 inch head is in each box. The WETOLS kit adds a 1/4 inch head for larger rivets.
Can a hand rivet gun set steel rivets?
It depends on the tool. The HOLAPUZZLE and UistMek tools handle steel and stainless steel rivets, while the OSTAGAR kit works with aluminum body rivets only. The WETOLS maker notes the 6.4 mm head is not recommended for steel or stainless steel rivets, so match the head and the rivet material before pulling.
What is the difference between a rivet gun and a rivet nut tool?
A rivet gun sets blind rivets, which clamp sheet from one side and leave the mandrel to snap off. A rivet nut tool threads a mandrel into a rivet nut and pulls it tight, leaving a threaded hole in thin sheet. The WETOLS kit does both, with 6 mandrels in M5, M6, M8, 10-24, 1/4-20 and 5/16-18. See our types of rivet nuts guide for the common nut styles.
Related: rivet gun uses, how to use a rivet nut tool, best heavy duty rivet gun under 100, and the metal fab tools hub.




