Steel vs Aluminum Blind Rivets: Which One Should You Buy?
Steel and aluminum blind rivets differ on strength, weight and corrosion, and the listings here show stainless steel kits and single-size packs to match the joint.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Benchmark Abrasives 4.5" Aluminum Oxide Type 1 Cut Off Wheels9.7/10View on Amazon - 2
9.7/10View on Amazon - 3
Wensilon9.7/10View on Amazon - 4
WensilonView on Amazon - 5
ALLCLEAN 100 Pcs 3/16"x1/2" Stainless Steel Blind Pro RivetsView on Amazon - 6
ALLCLEAN 50 Pcs 1/4" x 1/2" Stainless Steel Blind Pro RivetsView on Amazon - 7
ALLCLEAN 240 Pcs 1/8"x1/2" Stainless Steel Blind Pro RivetsView on Amazon - 8
ALLCLEAN 100 Pcs 3/16"x3/8" Stainless Steel Blind Pro RivetsView on Amazon - 9
ALLCLEAN 250 Pcs 1/8"x3/8" Stainless Steel Blind Pro RivetsView on Amazon
Steel vs aluminum blind rivets comes down to strength against weight. Steel holds a heavier joint, while aluminum keeps the finished part lighter and still resists corrosion. Pick steel where the joint carries load, and aluminum where weight matters more than strength. This guide compares the materials side by side and shows what the listings here actually offer, since every listing in this guide states stainless steel.
Other welders and gear to compare
WensilonCheck price on Amazon
ALLCLEAN 100 Pcs 3/16"x1/2" Stainless Steel Blind Pro RivetsCheck price on Amazon
ALLCLEAN 50 Pcs 1/4" x 1/2" Stainless Steel Blind Pro RivetsCheck price on Amazon
ALLCLEAN 240 Pcs 1/8"x1/2" Stainless Steel Blind Pro RivetsCheck price on Amazon
ALLCLEAN 100 Pcs 3/16"x3/8" Stainless Steel Blind Pro RivetsCheck price on Amazon
ALLCLEAN 250 Pcs 1/8"x3/8" Stainless Steel Blind Pro RivetsCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The difference in one paragraph
A blind rivet joins sheet and plate from a single side of the work, which is why it suits closed sections and spots a gun can reach from the front only. The mandrel pulls through the rivet body, the body swells against the back of the stack, and the mandrel snaps off at its break point. Steel and aluminum versions share that setting method; they differ in what the set rivet can carry, how much it weighs, and how it handles weather and mixed metals.
Side by side
| Topic | Steel blind rivets | Aluminum blind rivets | Listing note |
|---|---|---|---|
| Strength | Stronger for the same rivet size | Softer and easier to set | No strength figures are stated in these listings |
| Weight | Heavier on the finished part | Lighter on the finished part | Weight is not stated in these listings |
| Corrosion | Resists rust and acid, per the listings | Resists corrosion without rust | Listings state corrosion and acid resistance |
| Best use | Heavy joints, outdoor and auto work | Light panels where weight matters | Listings name auto, aviation, ductwork and furniture |
| Grip range | Match the grip to the material stack | Match the grip to the material stack | ALLCLEAN states a grip range of 6.0-8.0mm |
| Watch out | Harder to pull | Lower strength than steel at the same size | INCLY washers back oversized holes |
| Mixed metals | Aluminum part can corrode against a steel rivet | Aluminum rivet can corrode against a steel part | Not stated in these listings |
Grip range is the span of material thickness a rivet can grip, so match it to the stack before ordering. A rivet that is too short for the stack may not set properly, and a rivet with too much grip length can leave a loose joint. Check the size line on the listing, not just the pack count.
When steel is the better choice
- Load-bearing joints. Steel carries more load than aluminum at the same rivet size, which suits brackets, frames and repairs that take force.
- Outdoor and auto work. The listings here name indoor and outdoor use, plus automotive, aviation, ductwork and furniture work, and state corrosion and acid resistance for their stainless steel.
- Repeat work in one size. Single-size packs suit a run of the same joint: one listing offers 150 pieces in 1/4 inch by 1/2 inch, and another offers 100 pieces in 3/16 inch by 1/2 inch.
- Long service with a stated warranty. One listing offers a 24-month warranty, which is the only warranty term stated among the four listings.
Steel rivets need a gun that can pull them; see the best rivet gun for steel rivets for guns suited to steel.
When aluminum is the better choice
- Light panels. Aluminum keeps panels and trim light, which suits work where extra weight counts against the design.
- Weight-sensitive assemblies. On parts that move, hang or travel, the lighter rivet leaves more margin for the rest of the assembly.
- Softer setting. Aluminum pulls with less force, so smaller hand guns can set it where a steel rivet would strain the tool.
- Corrosion without rust. Aluminum resists corrosion and never rusts, which suits damp spots where a plain steel rivet would stain.
For guns suited to softer rivets, see the best rivet gun for aluminum rivets.
What the listings here offer
Every listing in this guide states stainless steel, so the four listings below are presented as stainless steel, with the ZQZ contradiction noted below. Ranked from the widest kit to the simplest single-size pack, the listings offer:
INCLY 720-piece kit. The widest range here: 8 sizes, 360 rivets plus 360 washers in a storage case, with washers that back oversized holes and reduce pull-through on thin or soft material. It suits a shop that faces mixed sizes and irregular holes.
ZQZ 680-piece kit. A kit of 340 rivets plus 340 washers in a storage case, described in the title as 3 sizes and 8 lengths. Read this listing with care: one bullet calls the rivets aluminum while the title and another bullet call them 304 stainless steel, so treat it as stainless and confirm before ordering.
Wensilon 150-piece pack. A single size, 1/4 inch by 1/2 inch, in stainless steel with a stainless steel mandrel, backed by a 24-month warranty. It suits repeat work in that size.
ALLCLEAN 100-piece pack. A single size, 3/16 inch by 1/2 inch, with a stated grip range of 6.0-8.0mm, a flange diameter of 3/8 inch, and a stainless steel grip and mandrel. It suits a buyer who wants the grip range spelled out.
Steel vs aluminum blind rivets: how to decide
Start from the joint, not the pack. If the joint carries load, sits outdoors, or joins steel, steel is the safer material. If the joint is light, moves, or hangs, and the load is modest, aluminum saves weight and still resists corrosion. When the two materials meet, keep the rivet metal matched to the part metal where possible, since mixed metals can corrode at the joint. For any listing, check the material line, the diameter and grip length, and the grip range where the listing states one.
Rivet setting safety. A snapping mandrel can throw a sharp stem, so wear eye protection and keep hands clear of the gun nose while setting. Work with ventilation when drilling old paint or coated metal, and clear flammable material from the area before drilling or grinding.
FAQ for welders
Can aluminum rivets hold a heavy steel joint?
Aluminum is softer than steel, so a heavy joint that takes force belongs on steel rivets. Use aluminum where the load is light and weight matters more than strength.
Do stainless steel rivets rust?
The listings here state corrosion and acid resistance, and name indoor and outdoor use for their stainless steel. Mixed metals at the joint can still corrode, so match the rivet metal to the part metal where possible.
What grip range should a buyer check?
Grip range is the span of material thickness the rivet can grip, so it must cover the stack being joined. The ALLCLEAN listing states a grip range of 6.0-8.0mm, which shows the kind of line to look for on any listing.
Why does one listing mention both aluminum and stainless steel?
The ZQZ listing calls its rivets aluminum in one bullet and 304 stainless steel in the title and another bullet, so the listing contradicts itself. Treat it as stainless steel and confirm the material before ordering, rather than counting it as an aluminum rivet.
Can a blind rivet be set with access from a single side?
Yes, that is the point of a blind rivet, and the ZQZ listing states single-sided installation. The gun pulls the mandrel from the front while the rivet body grips from behind.
Related: best blind rivets for stainless steel, best heavy duty rivet gun under 100, blind rivet pliers vs rivet gun, cordless vs corded rivet gun, and the metal fab tools hub.




