Best Blind Rivets for Stainless Steel (2026): 5 Picks, Scored
Five stainless steel blind rivet packs compared on stated size, head style, pack count, washers and warranty, for sheet metal, trailer and shop repair work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallWensilon 250 Piece9.7/10View on Amazon - 2
Most Rivetssmseace 700 Piece Kit9.6/10View on Amazon - 3
Best Large FlangeALLCLEAN Large Flange9.6/10View on Amazon
A trailer corner starts bleeding rust around the rivets, not the panel. The panel is fine. The fasteners came from the bottom of the drawer, and every one now wears an orange halo that makes a good repair look cheap. That is the failure stainless blind rivets exist to prevent. This guide covers the best blind rivets for stainless steel, five packs compared on what each listing states: sizes, head styles, pack counts, washers and warranty.
All five are stainless steel per their listings, three of them explicitly 304. They suit sheet metal, trailers, gutters, HVAC ducts, cabinets, automotive panels and shop repairs where aluminum rivets would corrode out. The ranking below comes from the Gear Score on each card: stated specs, honest counts, useful head styles and a warranty in writing move a pack up.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Wensilon 250 Piece: The only stated warranty here, 24 months, plus 250 pieces of 3/16 by 1/2 inch rivets with stated corrosion and acid resistance for indoor and outdoor work. Check price on Amazon
- Most Rivets smseace 700 Piece Kit: A 700-piece 304 stainless assortment in 9 sizes per the bullets, with 3 sizes of stainless washers in a labeled box for soft or oversized holes. Check price on Amazon
- Best Large Flange ALLCLEAN Large Flange: A large flange head for a wider bearing surface, with a stated grip range of 6.0 to 8.0 mm and a 5/8 inch flange diameter. Check price on Amazon
The machines

Wensilon (250Pcs) 3/16"x1/2" stainless steel blind
A 250-piece pack of 3/16 by 1/2 inch stainless rivets with the only stated warranty in this guide, 24 months, and stated corrosion and acid resistance.
Pros
- 24-month warranty stated in the listing, the only one here
- 250 pieces of one size, enough for a repair run
- States corrosion and acid resistance, indoor and outdoor use
- Self-plugging open end design, smooth surface, stated easy install
Cons
- Single size, 3/16 by 1/2 inch, no assortment
- Grip range not stated, only rivet length
- No washers included
- Sloppy title wording, though the material is stated as stainless steel

700Pcs 304 Stainless Steel Pop Rivets Kit
A 700-piece 304 stainless assortment in a labeled box, with 3 sizes of stainless washers for soft or oversized holes.
Pros
- 700 pieces with washers, the largest count here
- 9 sizes covering 1/8, 5/32 and 3/16 inch diameters per the bullets
- Includes 3 sizes of 304 stainless washers for a larger bearing surface
- Stated rust resistance suited to saltwater environments, as the maker claims
Cons
- No warranty term stated
- Truss head style may not suit every repair

100pcs All Stainless Steel Large Flange Blind
A 100-piece pack of large flange 3/16 by 1/2 inch stainless rivets, with a stated grip range of 6.0 to 8.0 mm.
Pros
- Large flange head spreads the load over a wider area
- States grip diameter, grip length and a 6.0 to 8.0 mm grip range
- 5/8 inch flange diameter stated for soft materials
- Stated for indoor, outdoor and harsh environments
Cons
- 100 pieces, the smallest count here
- Single size only
- No warranty term stated
- No washers included

110pcs Steel Rivets 7-Sizes 304 Stainless Steel
A 110-piece 304 stainless kit with exact counts across 7 sizes, from 1/8 by 1/4 inch up to 3/16 by 5/8 inch.
Pros
- Exact per-size counts printed in the listing, from 20 down to 10 pieces
- 7 sizes spanning three diameters and five lengths
- Labeled plastic box for the shop drawer
- Smooth, burr-free surface with stated smooth core-pulling
Cons
- Only 10 pieces of each 3/16 inch length, the smallest sub-counts here
- No warranty term stated
- No washers included
- Dome head only, no flange or washer options

1/8 x 3/8 304 Stainless Blind Rivets 100 Pack
A 100-pack of single-size 1/8 by 3/8 inch 304 stainless rivets with a dome head and clear install notes in the listing.
Pros
- 304 stainless with stated better corrosion resistance than aluminum rivets
- Clear listing: check the size chart, match diameter, length, hole size and thickness
- Dome head leaves a clean, low-profile finish
- Install tips cover pull force, nosepiece fit and backup washers
Cons
- Single size, 1/8 by 3/8 inch only
- 100 pieces, the smallest count here
- No warranty term stated
- No washers included
Other welders and gear to compare
100pcs 3/16" x1/2" Stainless Blind RivetsCheck price on Amazon
Pop RivetsCheck price on Amazon
BCP Fasteners Stainless Steel Pop RivetsCheck price on Amazon
WensilonCheck price on Amazon
MywishCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Size | Material | Pack | Head | Extras | Warranty |
|---|---|---|---|---|---|---|---|
| Wensilon 250 Piece | 9.7/10 | 3/16 x 1/2 in | Stainless steel | 250 | Dome | None | 24 months |
| smseace 700 Piece Kit | 9.6/10 | 1/8 to 3/16 in | 304 stainless steel | 700 | Truss | 3 washer sizes | None stated |
| ALLCLEAN Large Flange | 9.6/10 | 3/16 x 1/2 in | Stainless steel | 100 | Large flange | Grip range 6.0-8.0 mm | None stated |
| Seept 110 Piece Kit | 9.5/10 | 1/8 to 3/16 in | 304 stainless steel | 110 | Domed | 7 sizes, counts listed | None stated |
| YaaYii 1/8 Inch | 9.5/10 | 1/8 x 3/8 in | 304 stainless steel | 100 | Dome | Install notes | None stated |
Ratings in this table are the makers’ own claims taken from each product page (22 October 2026).
How to pick the best blind rivets for stainless steel
Diameter and grip length
Diameter is the hole you drill, and grip is the thickness the rivet can clamp. The listings here span three diameters, 1/8, 5/32 and 3/16 inch, with body lengths from 1/4 inch up to 5/8 inch in the Seept kit. The ALLCLEAN listing gives the most sizing detail: a grip diameter of 3/16 inch, a grip length of 1/2 inch, a grip range of 6.0 to 8.0 mm and a 5/8 inch flange diameter. The YaaYii listing is blunt about it: check the size chart and match rivet diameter, body length, hole size and material thickness before ordering. A rivet that is too short never expands on the blind side, and one that is too long bends instead of swelling.
Head style
Four head styles show up here. The YaaYii, Wensilon and Seept packs use a dome head, the low-profile open-end shape that sits flush on the panel. The smseace kit uses a truss head, a wider low head that spreads load on the front side. The ALLCLEAN pack is the only large flange pick: the maker claims the oversized head distributes force more evenly, which suits soft or thin material where a standard dome would sink or pull through. There is no wrong choice between them, only the wrong one for the material in front of you.
Washers and soft material
Washers are the fix for thin, soft or oversized holes, and two listings address them. The smseace kit includes 3 sizes of 304 stainless washers in the box, which the maker says prevent pull-out and add bearing surface. The YaaYii listing gives the same advice for its single-size pack: for thin, soft or oversized holes, use backup washers when needed. The other three packs include no washers, so if you are riveting sheet that is thin enough to dent with a thumb, plan on buying washers separately. Our best rivet gun kit guide covers the tools that pair with these packs.
Packs and assortments
Buy to the job, not to the drawer. The single-size packs are 100 pieces from YaaYii and ALLCLEAN, and 250 pieces from Wensilon, for repair runs where one size does the whole job. The assortments are 110 pieces across 7 sizes from Seept, with every sub-count printed in the listing, and the smseace 700-piece kit with washers. An assortment earns its place when the next job is always a different hole, but watch the sub-counts: the Seept kit only carries 10 pieces of each 3/16 inch length, so a big run of one size still calls for a single-size pack. The Wensilon 250-piece pack sits between the two: enough of one size for a full repair without the leftovers of an assortment you will never open.
Stainless grade and corrosion claims
Three of the five packs name 304 stainless steel in the listing, and the other two state stainless steel. The Wensilon listing goes further with stated corrosion and acid resistance for indoor and outdoor use, naming DIY, automotive, aviation, ductwork and furniture as its uses. The smseace maker claims rust resistance suited to saltwater environments. Read those as the maker’s claims, not measured figures: no listing here publishes a salt-spray result or an exposure rating. For a trailer or gutter repair that lives outside year round, the 304 claim plus a head style that does not trap water is the combination to favor.
Pull force and the right gun
Stainless steel rivets need more pulling force than aluminum rivets, and two listings say so outright. Use the correct rivet gun nosepiece and a properly drilled hole, and do not expect a light-duty hand tool to enjoy a full box of stainless. If you are setting these all day, compare pneumatic vs electric rivet gun options, and see our best rivet gun for steel rivets and best heavy duty rivet gun picks for guns that handle the harder pull.
Before You Strike an Arc
- Match the rivet diameter to the hole before you set: the listings here span 1/8, 5/32 and 3/16 inch, and a sloppy hole is where pull-through starts.
- Stainless needs more pull than aluminum per the listings, so use a gun that handles steel rivets with the right nosepiece fitted.
- For thin, soft or oversized holes, add the backup washers the listings mention instead of pulling a dome head through the sheet.
- Check the grip range against the stack thickness before you set: the large-flange listing states 6.0 to 8.0 mm, and the assortment kits cover several lengths.
- Drill clean holes and keep the nosepiece square to the work; a crooked pull snaps the mandrel early and leaves a loose joint.
FAQ for welders
What is a blind rivet?
A blind rivet is a fastener that sets from one side of the work, for joints where the back of the panel cannot be reached. The dome head leaves a clean, low-profile finish while the body expands on the blind side, per the YaaYii listing. They suit sheet metal, trailers, gutters, HVAC ducts and general shop repairs.
How does a blind rivet work?
You push the rivet through a drilled hole, then the rivet gun pulls the mandrel until the body swells against the back of the joint and the mandrel snaps off. The Seept listing notes smooth core-pulling that does not jam. The YaaYii listing adds that stainless rivets need more pulling force than aluminum, so use the correct nosepiece and a properly drilled hole. See our best rivet gun adapter guide for nosepiece options.
How many blind rivets per box?
The single-size packs here hold 100 pieces, the Seept kit holds 110 across 7 sizes, the Wensilon holds 250 of one size, and the smseace assortment holds 700 pieces with washers. Buy one size for a repair run, and an assortment for the shop drawer. Check the sub-counts in an assortment before you commit, since the long sizes may only carry 10 pieces each.
How strong are blind rivets?
The listings publish no shear or pull-out figures, so judge by fit instead: the right diameter, full expansion on the blind side, and washers in thin or oversized holes. The 304 stainless listings claim stronger fastening than aluminum rivets and better corrosion resistance, as the maker’s claim. Rivets usually need special tools to set, so a proper gun matters more than a bigger pack.
Related: metal fab tools, best rivet gun kit, best rivet gun for steel rivets, best heavy duty rivet gun, rivet gun vs rivet nut tool, best rivet gun for aluminum rivets, and our guide to TIG vs stick for stainless steel when the joint calls for a weld instead.
Scoring, line by line
Each pack is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Blind rivets carry no electrical safety listing to state, so every pack here scores zero on that criterion, and the ranking comes from the other four. No total is written in the prose; the cards and tables show it.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Wensilon 250 Piece | 9.7 | 29 | 21 | 20 | n/a | 3 |
| smseace 700 Piece Kit | 9.6 | 28 | 21 | 21 | n/a | 0 |
| ALLCLEAN Large Flange | 9.6 | 28 | 21 | 19 | n/a | 0 |
| Seept 110 Piece Kit | 9.5 | 27 | 20 | 20 | n/a | 0 |
| YaaYii 1/8 Inch | 9.5 | 26 | 20 | 18 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




