Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Rivet Gun vs Rivet Nut Tool: Which One Should You Buy?

A pneumatic rivet gun, a 14 in hand rivet nut tool and a 430 pc rivet nut kit compared by power source, fastener sizes, noise and what is in the box.

Rivet Gun vs Rivet Nut Tool: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Pneumatic Rivet Nut Gun with Self-locking Head GunPneumatic Rivet Nut Gun with Self-locking Head Gun9.6/10View on Amazon
  2. 2AOBEN 14" Rivet Nut ToolAOBEN 14" Rivet Nut Tool9.6/10View on Amazon
  3. 3Pressure Rivet Nut Tool KitPressure Rivet Nut Tool Kit9.5/10View on Amazon

Verdict. The KIARUO pneumatic gun is the speed pick: air power, adjustable speed and a ≤65 dB muffler for shops that set lots of rivet nuts, but it needs a compressor and cannot set stainless steel rivet nuts. The AOBEN hand tool is the control pick: 14 in compound-hinge arms, 6 mandrels and 90 rivet nuts in a case, no air needed. The AskWay kit is the assortment pick: 430 rivet nuts in 5 metric sizes with a basic manual tool.

The rivet gun vs rivet nut tool decision starts with a thin sheet-metal bracket that needs threaded holes, but the panel is too thin to tap and there is no access to the back side. That is the job rivet nuts were made for: air-powered speed against hand-tool control. This comparison puts a pneumatic rivet gun, a 14 in hand rivet nut tool and a 430 pc rivet nut kit against each other on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.

The three tools

Pneumatic Rivet Nut Gun with Self-locking Head Gun

Pneumatic Rivet Nut Gun with Self-locking Head Gun

KIARUO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An air-powered rivet gun with self-locking heads for 1/4, 5/16 and 3/8 mandrels, adjustable speed, a ≤65 dB muffler, 15 mandrels and 3 heads in the box.

Pros

  • Air-powered setting with adjustable speed
  • Self-locking heads for 1/4, 5/16 and 3/8 mandrels
  • ≤65 dB with an embedded muffler
  • 15 mandrels, 3 bearings and 3 heads included

Cons

  • No warranty term stated
  • Needs a compressor; not a standalone tool
  • Cannot set stainless steel rivet nuts
  • Mandrel must be lubricated before use
AOBEN 14" Rivet Nut Tool

AOBEN 14" Rivet Nut Tool

AOBEN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 14 in hand rivet nut tool with compound-hinge steel arms, 6 interchangeable mandrels, 90 rivet nuts and 2 mandrel lock pins in a rugged case.

Pros

  • 14 in compound-hinge arms for leverage
  • 6 interchangeable mandrels, metric and SAE
  • 90 rivet nuts and 2 mandrel lock pins included
  • Quick-change head with spring-loaded mandrel

Cons

  • No warranty term stated
  • Hand power only; slower than air
  • Weighs 2.32 kg
  • No pull-force figure stated
Pressure Rivet Nut Tool Kit

Pressure Rivet Nut Tool Kit

AskWay9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A manual pressure rivet nut tool kit with 430 zinc-plated carbon steel rivet nuts in 5 metric sizes, M3 through M8, in a labeled storage box.

Pros

  • 430 rivet nuts in 5 metric sizes
  • Knurled flat-head design resists slipping
  • Zinc-plated carbon steel, rust-resistant
  • Labeled transparent storage box

Cons

  • No warranty term stated
  • Manual pressure tool; slowest of the three
  • No mandrel-change details stated
  • Kit only; the tool is basic

Other welders and gear to compare

Side by side

KIARUO Pneumatic Rivet Gun AOBEN 14 in Hand Rivet Tool AskWay 430 pc Rivet Nut Kit
Gear Score 59 58 55
Side Rivet gun Rivet nut tool Rivet nut tool
Power Air powered Hand Hand
Fastener sizes 1/4, 5/16, 3/8 M6, M8, M10; 1/4-20, 5/16-18, 3/8-16 M3, M4, M5, M6, M8
Rivet nuts included Not stated 90 pcs 430 pcs
Mandrels 3 heads, 15 mandrels 6 interchangeable Not stated
Noise ≤65 dB Not stated Not stated
Weight 4.18 lb 2.32 kg 4.2 lb
Warranty Not stated Not stated Not stated

All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026. No listing states a safety certification or a warranty term.

What each tool sets

All three set rivet nuts, threaded inserts that give thin material a machine thread for screws and bolts. The KIARUO sets them with air power through self-locking heads. The AOBEN sets them by hand through compound-hinge leverage. The AskWay kit centers on the fasteners: 430 rivet nuts with a basic manual installer to set them.

Power source

The KIARUO is air powered: it needs a compressor and rewards you with speed. The AOBEN and the AskWay kit are hand tools: slower and usable anywhere. The KIARUO listing does not state air consumption, so size the compressor from its manual, not from the listing.

Fastener sizes

The KIARUO covers 1/4, 5/16 and 3/8 with 3 self-locking heads. The AOBEN covers M6, M8 and M10 plus 1/4-20, 5/16-18 and 3/8-16 with 6 interchangeable mandrels. The AskWay kit covers M3, M4, M5, M6 and M8 with 160, 110, 70, 70 and 20 pieces respectively. The right coverage is the one your jobs need.

Speed and noise

The KIARUO is the only powered pick: adjustable speed, 500 RPM, and an embedded muffler holding working noise to ≤65 dB. The hand tools state no noise figures. The listing positions the air gun for speed and the hand tools for control; match the tool to the volume of your jobs.

Weight and build

The KIARUO gun weighs 4.18 lb with an impact-resistant S2 steel connecting rod and an alloy steel rotor. The AOBEN tool weighs 2.32 kg with thick heat-treated steel arms. The AskWay kit weighs 4.2 lb in its box. None of the three lists a third-party safety standard.

What is in the box

The KIARUO box holds the gun, 15 mandrels, 3 bearings, 3 rivet nut heads, a US air inlet and a manual: everything to set with, but no rivet nuts are listed. The AOBEN box holds the tool, 6 mandrels, 90 rivet nuts and 2 mandrel lock pins in a rugged case. The AskWay box holds the installer and 430 rivet nuts in a labeled transparent box. Count the fasteners before you choose: the kits include them, the gun does not.

Limits

The KIARUO listing is blunt about its limits: lubricate the mandrel before use, or it may wear the rivnut’s inner wall and jam the screw; and it cannot set stainless steel rivet nuts, only aluminum and galvanized. The AOBEN’s limit is your arms: hand tools trade speed for control. The AskWay kit’s limit is its tool: a basic manual installer with no stated mandrel-change system.

Rivet gun vs rivet nut tool: the short version

Air power against hand power, that is the whole of rivet gun vs rivet nut tool. The gun sets faster and needs a compressor; the hand tools go anywhere and need only your arms. Pick the side that matches where and how often you set rivet nuts, then pick the listing on that side with the sizes you need.

Choose the rivet gun if

  • You have a compressor and set rivet nuts often.
  • You want adjustable speed and quick mandrel changes.
  • Working noise at or under 65 dB matters in your shop.
  • Your rivet nuts are aluminum or galvanized, not stainless.

Choose the rivet nut tool if

  • You have no compressor or work away from the shop.
  • You want mandrels, rivet nuts and a case in one box.
  • You need metric sizes from M3 to M8 on hand.
  • You prefer hand-tool control over powered speed.

FAQ for welders

What is the difference between a rivet gun and a rivet nut tool?

In this comparison, the rivet gun is the air-powered KIARUO that sets rivet nuts with compressed air, while the rivet nut tools are the hand-powered AOBEN and AskWay picks that set them by leverage. Both sides install the same kind of threaded insert; they differ in power source and pace.

Can the KIARUO rivet gun set stainless steel rivet nuts?

No. Its listing states it cannot rivet stainless steel rivet nuts and is only for aluminum and galvanized rivet nuts. Lubricate the mandrel before use.

What sizes do these three cover?

The KIARUO covers 1/4, 5/16 and 3/8. The AOBEN covers M6, M8 and M10 plus 1/4-20, 5/16-18 and 3/8-16. The AskWay kit covers M3, M4, M5, M6 and M8.

Do I need an air compressor for the KIARUO?

Yes. It is air powered and ships with a US air inlet; the listing does not state air consumption, so check the manual for the compressor it needs.

Do any of these include rivet nuts?

The AOBEN includes 90 rivet nuts and the AskWay includes 430. The KIARUO lists mandrels, heads and bearings but no rivet nuts.

Related: the best heavy duty rivet gun, the best rivet gun for metal and our best hand seamer for sheet metal.

Scoring, line by line

All three tools are scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Performance weighs what each tool sets and how; build covers materials and construction; value balances the box contents against the class. No listing states a safety certification or a warranty term, so safety and warranty score zero across the board.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
KIARUO Pneumatic Rivet Gun 9.6 30 21 20 n/a 0
AOBEN 14 in Hand Rivet Tool 9.6 28 21 21 n/a 0
AskWay 430 pc Rivet Nut Kit 9.5 27 19 21 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

Before you set a rivet nut. Wear eye protection when setting rivet nuts: mandrels and spinning parts throw sharp chips. Disconnect the air supply before changing mandrels on the pneumatic gun, and lubricate the mandrel as the listing directs. Clamp the workpiece so it cannot spin with the tool, and keep fingers clear of the nosepiece. See the OSHA welding overview for shop safety basics.

More buying guides

Metal Fab Tools ·

How to Use a Rivet Nut Tool

A rivet nut puts a thread into sheet too thin to tap: drill the hole, thread the insert onto the tool, squeeze to fold…