Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Remove Rivet Nut: A Step-by-Step Guide

A spinning rivet nut will not come out with a wrench alone: hold it still, drill the flange off, push the body through, and fit the replacement with the matching mandrel.

How to Remove Rivet Nut: A Step-by-Step Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VLOXO Rivet Nut Drill Adapter for Electric DrillVLOXO Rivet Nut Drill Adapter for Electric Drill9.5/10View on Amazon
  2. 2ASKWAY SAE Rivet Nut Tool 420pcs Imperial CarbonASKWAY SAE Rivet Nut Tool 420pcs Imperial Carbon9.5/10View on Amazon
  3. 3Carbon Steel Rivet Nut Tool KitCarbon Steel Rivet Nut Tool Kit9.4/10View on Amazon
  4. 4Rivet Nut Tool Kit,72 Pcs Rivet Nut Kit with 6Rivet Nut Tool Kit,72 Pcs Rivet Nut Kit with 69.4/10View on Amazon

A rivet nut that spins in its hole will not come out with a wrench alone, and drilling it out blind risks the panel around it. How to remove rivet nut comes down to holding the nut still, taking the flange off, and pushing the body through, and the right order depends on whether the nut still grips or spins free.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

VLOXO Rivet Nut Drill Adapter for Electric Drill

VLOXO Rivet Nut Drill Adapter for Electric Drill

VLOXO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A drill adapter kit with 13 heads and 245 rivets that turns an electric drill into a rivet nut tool, and whose mandrels thread into a stuck nut to hold it for removal.

Pros

  • 13 heads cover metric and SAE sizes from M3 to M10 and 6-32 to 3/8-16
  • 245 rivets included, 20 per size except M8, M10 and 3/8-16 with 15 each
  • Works with an 18V to 24V drill or a ratchet wrench
  • Handles aluminum, steel and stainless steel rivets

Cons

  • Drill needs a torque limiter clutch
  • The 5-6mm nut is not recommended for steel and stainless steel riveting
  • No drill is included
  • No case dimensions are stated
ASKWAY SAE Rivet Nut Tool 420pcs Imperial Carbon

ASKWAY SAE Rivet Nut Tool 420pcs Imperial Carbon

AskWay9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A manual SAE kit with 420 galvanized rivet nuts in 5 imperial sizes, whose tool threads into a stuck nut to hold it while the flange is drilled off.

Pros

  • 420 rivet nuts in 5 SAE sizes: 6-32, 8-32, 10-24, 1/4-20 and 5/16-18
  • Galvanized nuts will not rust in long-term storage, per the listing
  • Manual tool made of high-quality steel, sturdy and durable, per the listing
  • Storage box with clear labels and instructions

Cons

  • Bullets mention metric rivet nuts though the kit is imperial
  • No warranty term is stated
  • Manual use only, no drill adapter is included
  • Only imperial sizes; no metric sizes
Carbon Steel Rivet Nut Tool Kit

Carbon Steel Rivet Nut Tool Kit

Generic9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 84-piece metric kit with 7 mandrels from M3 to M12 and 70 rivet nuts, for manual or drill use on sheet metal and thin panels.

Pros

  • 7 mandrels cover M3, M4, M5, M6, M8, M10 and M12
  • 70 carbon steel rivet nuts, 10 per size
  • Manual long-arm use or drill use
  • Rugged carrying case for storage

Cons

  • No warranty term is stated
  • No SAE sizes are included
  • No drill is included
Rivet Nut Tool Kit,72 Pcs Rivet Nut Kit with 6

Rivet Nut Tool Kit,72 Pcs Rivet Nut Kit with 6

stray poet9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 72-piece kit with 6 heads and 60 rivet nuts from M3 to M10, for manual or drill use in tight spaces and overhead work.

Pros

  • 6 heads cover M3 to M10, with matched drill bits
  • 60 rivet nuts, 10 per size
  • Compact attachment fits confined workspaces and overhead work
  • Manual and electric drill dual use

Cons

  • No warranty term is stated
  • Listing describes a second M3-M12 7-piece set the title does not name
  • No SAE sizes are included

How to Remove Rivet Nut: Hold It, Drill It, Push It Through

Start by finding out whether the nut grips or spins. Thread a bolt into the nut by hand: if the nut turns with the bolt, it spins free and must be held before anything else. If the nut holds firm, the flange is what stands between you and the hole, and the drill is the tool for it.

To take the flange off, drill it away with a bit wider than the threaded hole, and stop as soon as the flange separates from the body. A bit that is too wide opens up the hole in the panel. Once the flange is off, push the body through the panel from the front, or tap it out from behind if you can reach it.

A spinning nut needs a grip first. If a bolt is still in the nut, locking pliers on the flange hold the nut while the bolt turns out. With the bolt out, a mandrel threaded into the nut holds it while the flange is drilled off, with less damage to the flange than pliers. If the flange is already chewed up, grind the flange off and push the body through. A drill adapter holds the nut the same way, through its mandrel, and sets the replacement faster; see our best rivet gun adapter picks. Wear safety glasses, and keep gloves and loose sleeves clear of the drill.

Side by side

VLOXO Drill Adapter AskWay SAE 420-Pc Kit Generic M3-M12 Kit Stray Poet M3-M10 Kit
Thread sizes 13 heads, metric and SAE 5 SAE sizes 7 metric sizes, M3 to M12 6 metric sizes, M3 to M10
Rivet nuts included 245 rivets 420 rivet nuts 70 rivet nuts 60 rivet nuts
Drive Drill adapter or ratchet Manual tool Manual or drill Manual or drill
Warranty Not stated Not stated Not stated Not stated
Heads 13 heads 1 tool, 5 sizes 7 mandrels 6 heads

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 10 November 2026.

The Gear for the Job

The kits below cover the holding and refitting steps above: their mandrels thread into the old nut to hold it still, and set the replacement in the same size.

After the old nut is out

Clean the hole and check its size before fitting the replacement: the new nut must suit the hole as it is now, not as it was. Match the mandrel to the thread, imperial or metric, and set the nut with the tool. The VLOXO adapter (on Amazon) pairs with an 18V to 24V drill with a torque limiter clutch, per its listing, or a ratchet wrench. The AskWay kit (on Amazon) works by hand, while the Generic and Stray Poet kits work by hand or on a drill. If the hole has grown past the sizes the kit covers, the panel needs a repair before a new nut goes in. See our best rivet gun kit picks for setting tools.

FAQ for welders

Can I remove a rivet nut without a special tool?

Yes, with a drill and locking pliers: hold the flange, drill it off with a bit wider than the threaded hole, and push the body through. A rivet nut tool makes the holding step easier, since its mandrel threads into the nut, but the drill does the removal.

What if the rivet nut spins?

Hold the flange with locking pliers while the bolt turns out, or thread a mandrel into the nut to hold it. If the flange is chewed up, grind the flange off and push the body through. A nut that spins freely will not come out by turning alone.

What size drill bit do I use to remove a rivet nut?

One wider than the threaded hole, so it takes the flange off without opening up the panel hole. Stop as soon as the flange separates, and push the body through.

Can I reuse a rivet nut after removing it?

No. Removing a rivet nut means drilling the flange off, which destroys the nut. Fit a new nut in the same thread size, with the mandrel that matches it.

Do I need a rivet nut tool to fit the replacement?

A tool sets the nut straight and square, which matters on thin panels. The kits in this guide include mandrels for each size they cover, so match the mandrel to the thread of the replacement nut.

Related: the metal fab tools hub, the best rivet gun kit picks and the best heavy duty rivet gun picks. Also see our best blind rivets for stainless steel.

More buying guides

Metal Fab Tools ·

How to Use a Rivet Nut Tool

A rivet nut puts a thread into sheet too thin to tap: drill the hole, thread the insert onto the tool, squeeze to fold…

Metal Fab Tools ·

How to Remove Blind Rivets

Drill out the head, match the bit to the rivet size, and punch out the rest: a step-by-step guide to removing blind rivets without…