Rivet Gun Tips for Cleaner Rivets
Rivet gun tips for cleaner, tighter rivets: match the nose piece to the rivet, keep the gun square to the work, and clear jams with the reverse switch instead of forcing the tool.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Decwls Cordless Rivet Gun Electric Compatible9.6/10View on Amazon - 2
Cordless Rivet Gun Compatible with Dewalt 20V Max9.5/10View on Amazon - 3
DEWALT 20V MAX XR Cordless Rivet Tool, 3/16"9.5/10View on Amazon - 4
Sherman Marson 39000 HP-2 Professional Hand9.4/10View on Amazon
A trailer panel rattles, a bracket works loose on a gate, a patch panel needs fastening where a bolt head would sit proud. A rivet gun sets a blind rivet and leaves a clean head, and rivet gun tips make the difference between a rivet that holds and a rivet that sits crooked. Match the nose piece to the rivet, keep the gun square to the work, and let the tool finish the pull instead of forcing it.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Decwls Cordless Rivet Gun Electric Compatible
A Milwaukee 18V cordless rivet gun with 2248–2698 lbf of pulling force, 150 rivets in the box, and a 2-year warranty.
Pros
- 2248–2698 lbf of pulling force, the strongest stated here
- 150 rivets in the box: 75 stainless steel and 75 aluminum
- 3 nose pieces for 1/8, 5/32 and 3/16 inch rivets, plus a wrench and a carrying case
- One-button forward and reverse switch clears a stuck rivet without manual disassembly
Cons
- Tool only, so a Milwaukee 18V battery and charger must come from the kit already on the bench
- 3.17 lb before the battery, so it gains weight once a battery is fitted
- The 150 included rivets cover stainless steel and aluminum only
- Rivet sizes stop at 3/16 inch, with no 3/32 inch nose piece

Cordless Rivet Gun Compatible with Dewalt 20V Max
A DeWalt 20V MAX cordless rivet gun with 2000 lbs of pulling force, 3 nose pieces, and a brushless motor.
Pros
- 2000 lbs of pulling force from a brushless motor
- 3 nose pieces for 1/8, 5/32 and 3/16 inch rivets, changed without tools
- Lists alloy, copper, stainless steel, carbon steel, iron and aluminum rivets
- Built-in LED and a one-button forward and reverse switch with a center safety lock
Cons
- Tool only, with no battery or charger in the box
- 2000 lbs of pulling force sits below the 2248–2698 lbf the Decwls pick states
- Rivet sizes stop at 3/16 inch, with no 3/32 inch nose piece
- 1 Year warranty is the shortest stated term here

DEWALT 20V MAX XR Cordless Rivet Tool, 3/16"
A DEWALT 20V MAX XR cordless rivet tool with 2,100 lbf of pulling force, 800 rivets per charge, and an on-board mandrel collector.
Pros
- 2,100 lbf of pulling force, with 800 rivets per charge
- Fits 3/32, 1/8, 5/32 and 3/16 inch rivets, the widest size range here
- On-board mandrel collector keeps loose mandrels out of the work area
- Tool-free nose change with on-board nose piece storage
Cons
- Bare tool only, so the battery and charger come from the kit already on the bench
- No warranty term is stated
- 4.156 lb makes it the heaviest cordless pick here
- 12.4 inches long, so it needs more room in the toolbox

Sherman Marson 39000 HP-2 Professional Hand
A hand riveter with a drop forged carbon steel upper handle, an aluminum alloy body, and cushion-molded vinyl grips.
Pros
- Drop forged carbon steel upper handle and high-strength aluminum alloy body
- Cushion-molded vinyl grips for comfort
- 1.0 lb, the lightest pick here, and needs no battery
- Square shoulder fulcrum pin stops pin rotation that can elongate the engaging holes
Cons
- Hand powered, so long runs take arm effort with no motor to help
- No rivet sizes are stated, so the fit must be checked against the rivets on hand
- No LED work light for dim corners
- 1 yr warranty is a short term next to the 2-year term on the Decwls pick
Rivet Gun Tips That Keep Rivets Clean and Tight
Start with the nose piece. The cordless picks here ship with nose pieces for 1/8, 5/32 and 3/16 inch rivets, and the DEWALT pick adds 3/32 inch. A nose piece that matches the rivet lets the mandrel pull straight; a loose fit lets the rivet tilt and the head seat crooked. Swap the nose piece with the tool-free change the BDJHMP and DEWALT picks list, and keep the spares close so the right size is on hand.
Hold the gun square to the work and press the nose piece flat against the material before pulling the trigger. The DEWALT pick states a 0.98 inch stroke length for fastening rivets in one stroke, and the cordless picks pull with a brushless motor, so there is no need to lean on the tool. When the mandrel snaps, the on-board mandrel collector on the DEWALT pick catches it.
The Rivet Guns for These Tips
Each tip above maps to a feature on the cordless gear below: nose piece sizes for the matching step, pulling force for the setting step, and a reverse switch for the jam clearing step.
Side by Side
| Decwls Cordless Rivet Gun | BDJHMP Cordless Rivet Gun | DEWALT DCF403B | Marson HP-2 | |
|---|---|---|---|---|
| Pulling force | 2248–2698 lbf | 2000 lbs | 2,100 lbf | Hand powered |
| Rivet sizes | 1/8, 5/32, 3/16 in | 1/8, 5/32, 3/16 in | 3/32, 1/8, 5/32, 3/16 in | Not stated |
| Power | Milwaukee 18V battery, tool only | DeWalt 20V MAX battery, tool only | DEWALT 20V MAX XR, bare tool only | Hand powered |
| Weight | 3.17 lb, excluding battery | 3.2 lbs | 4.156 lb | 1.0 lb |
| Nose pieces | 3 interchangeable | 3 | Tool-free change, on-board storage | Not stated |
| Rivets in the box | 150: 75 stainless steel, 75 aluminum | Not stated | Not stated | Not stated |
| LED work light | Built-in LED | Built-in LED | Integrated LED | Not stated |
| Warranty | 2-year | 1 Year | Not stated | 1 yr |
The cordless picks run on Milwaukee and DeWalt batteries, and each arrives as a bare tool. The hand riveter needs no battery at all and weighs 1.0 lb, the lightest pick here. Pulling force runs from 2000 lbs on the BDJHMP pick to 2248–2698 lbf on the Decwls pick, with the DEWALT pick at 2,100 lbf.
Match the Nose Piece to the Rivet
Rivet sizes run in small steps, and the nose piece has to match the rivet on the bench. The BDJHMP and Decwls picks cover 1/8, 5/32 and 3/16 inch rivets, while the DEWALT pick covers 3/32, 1/8, 5/32 and 3/16 inch rivets. Check the rivet size before loading it, and change the nose piece when the size changes. The Marson pick does not state which rivet sizes it fits, so check the rivets on hand against the tool before ordering.
Material matters as much as size. The BDJHMP pick lists alloy, copper, stainless steel, carbon steel, iron and aluminum rivets, and the Decwls pick lists stainless steel and aluminum rivets. The DEWALT pick pulls aluminum, steel and stainless steel blind rivets. Pick the rivet material for the job, then check that the gun lists it.
Keep the Gun Square and Let It Pull
A square gun sets a flat head. Hold the nose piece flat on the work, keep the gun in line with the rivet, and let the tool finish the pull. The BDJHMP pick states 2000 lbs of pulling force, the Decwls pick states 2248–2698 lbf, and the DEWALT pick states 2,100 lbf.
Watch the mandrel. The DEWALT pick stores loose mandrels in an on-board collector. The BDJHMP pick runs its cycle with a simple press of the switch, covering riveting, nail breaking and nail retraction, and locks when the switch is centered. The Decwls pick also has a one-button forward and reverse switch, with a center safety lock that stops accidental starts.
Clear a Jam Without Forcing It
A stuck mandrel stops the job, and forcing the tool makes it worse. The BDJHMP and Decwls picks carry a one-button forward and reverse switch: hold the switch in reverse to eject a jammed nail or a stuck rivet, with no manual disassembly. The center position locks the tool, so it cannot start by accident while the jam is cleared. Work under the built-in LED on the cordless picks when the light is poor.
FAQ for welders
What size nose piece fits the rivet?
Match the nose piece to the rivet size on the bench. The BDJHMP and Decwls picks cover 1/8, 5/32 and 3/16 inch rivets, and the DEWALT pick adds 3/32 inch. A nose piece that is too large lets the rivet tilt, and a nose piece that is too small will not seat the rivet.
Can a cordless rivet gun pull stainless steel rivets?
Yes, when the listing states it. The Decwls pick handles stainless steel and aluminum rivets with 2248–2698 lbf of pulling force, and the DEWALT pick pulls aluminum, steel and stainless steel blind rivets at 2,100 lbf. The BDJHMP pick lists stainless steel among the materials it supports.
Do these rivet guns come with a battery?
No. The BDJHMP pick is tool only and takes DeWalt 20V MAX (on Amazon) batteries, with no battery or charger in the box. The Decwls pick is tool only for Milwaukee 18V batteries, and the DEWALT pick is a bare tool only. The Marson pick is a hand riveter, so it needs no battery at all.
What happens when a rivet jams in the gun?
Use the reverse switch instead of forcing the tool. The BDJHMP and Decwls picks clear a jammed nail or stuck rivet by holding the switch in reverse, with no manual disassembly. Set the switch to the center position to lock the tool while the jam is cleared.
How many rivets per charge?
The DEWALT pick states 800 rivets per charge. The BDJHMP and Decwls picks do not state a rivets-per-charge figure, so the count depends on the battery fitted. The Decwls pick ships with 150 rivets in the box, 75 stainless steel and 75 aluminum.
Related: rivet gun uses, best rivet gun for steel rivets, cordless vs corded rivet gun, blind rivet pliers vs rivet gun, and the metal fab tools hub.




