Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Rivet Nuts and Which to Use

Flat head, knurled, metric and SAE rivet nuts compared by size range, material and kit contents, and how to pick the type a job needs.

Types of Rivet Nuts and Which to Use
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1INCLY 1200PCS Pop Rivets & Trifold Rivets Assortment Kit withINCLY 1200PCS Pop Rivets & Trifold Rivets Assortment Kit with9.7/10View on Amazon
  2. 2smseace 1500Pcs Aluminum Pop Rivets Kit with Washers insmseace 1500Pcs Aluminum Pop Rivets Kit with Washers in9.6/10View on Amazon
  3. 3Pop Rivets Assortment KitPop Rivets Assortment Kit9.5/10View on Amazon

A bolt needs threads to bite into, and thin sheet metal has none to give. A nut on the back side works until the panel closes up, the frame turns into a tube, or a hand cannot reach behind the work at all. That is the job types of rivet nuts are made for: a threaded insert that sets from the front only and leaves a fixed thread in sheet metal, tubing and thin panels, ready for a bolt whenever the part comes off again.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Types of rivet nuts in one paragraph

A rivet nut, also called a nutsert or threaded insert, is a hollow fastener with threads inside and a flange at the head. The setting tool pulls the body tight against the back of the panel while the flange holds the front, and the threads stay put for a bolt. Types split by head shape, body grip, thread system and material. The kits in this guide cover flat head nuts in carbon steel with a zinc plated or galvanized finish, in metric sizes M3 to M12 and SAE sizes 6-32 to 1/2-13, with knurled bodies on some nuts to resist turning in the hole.

Side by side

Metric kits SAE kits Combo kits Tool kits
Thread sizes M3 to M12 6-32 to 1/2-13 M3 to M12 and 6-32 to 3/8-16 M3 to M12 and 6-32 to 1/2-13
Nuts in the box 460 metric nuts 830 SAE nuts 920 nuts 230 nuts
Head style Flat head Flat head Flat head Not stated
Material Carbon steel, zinc plated Galvanized carbon steel Carbon steel, zinc plated Not stated
Setting tool No tool in the box No tool in the box No tool in the box Hand tool in the box
Best for Metric-only jobs SAE-only jobs Mixed metric and SAE work Setting nuts with a hand tool

A nuts-only kit suits a shop that already owns a setting tool, while a tool kit suits a first buy.

When metric sizes are the better choice

  • Metric hardware through the job. When the bolts and brackets on the job are metric, a metric kit keeps every thread in the same system. The Vifmy kit (on Amazon) with 920 pieces holds 460 metric nuts in sizes M3, M4, M5, M6, M8 and M10, beside 460 SAE nuts for mixed work.
  • Small threads in thin panels. M3 and M4 nuts fit fine work where a larger thread would crowd the panel. The Vifmy kit (on Amazon) with 420 pieces covers metric sizes M3 to M12.
  • Tool kits with metric mandrels. The WETOLS tool (on Amazon) covers metric sizes M3 to M12 with 11 mandrels, and the WOBANK 16″ tool covers the same metric range with 12 mandrels.

Drilling the hole comes first: the best twist drill bit set guide covers bits for thin metal.

When SAE sizes are the better choice

  • SAE hardware through the job. When the bolts and brackets on the job are SAE, an SAE kit keeps every thread in the same system. The AskWay kit with 430 pieces holds SAE sizes 6-32, 8-32, 10-24, 1/4-20 and 5/16-18.
  • Deep stock of small sizes. The Trivd kit with 830 pieces spans SAE sizes 6-32 to 1/2-13, with the smallest sizes in the largest counts.
  • SAE mandrels in the tool kit. The WOBANK 16″ tool carries SAE mandrels in 10-24, 1/4-20, 5/16-18, 3/8-16 and 1/2-13 beside metric sizes, and the VEVOR 16″ tool carries SAE sizes 8-32 to 1/2-13 with 13 mandrels.

SAE kits suit repair work on US-built machines, trailers and farm gear.

How to tell what a kit covers

The sizes a kit names, the mandrels in the box and the nut count tell the story of a kit. Check them before ordering, because a wide size range can mean few nuts in each size.

  • Sizes in the kit. The Vifmy kit with 920 pieces names metric sizes M3 to M10 and SAE sizes 6-32 to 3/8-16, while the Trivd kit with 830 pieces names SAE sizes 6-32 to 1/2-13.
  • Mandrels match the nuts. A tool is only as useful as the mandrels in its box: WETOLS packs 11 mandrels, WOBANK packs 12 and VEVOR packs 13, each covering metric and SAE sizes. The IYNRAFW mandrel sets cover metric sizes M3 to M10 with 6 mandrels in the smaller set and M3 to M12 with 7 mandrels in the larger set.
  • Nut counts. The Vifmy kit with 920 pieces holds 460 metric nuts and 460 SAE nuts; the Vifmy kit with 420 pieces holds 226 metric nuts and 194 SAE nuts. A high count suits a shop that sets nuts often; a low count suits occasional use.
  • Tool length. The WETOLS 17″ tool, the WOBANK 16″ tool and the VEVOR 16″ tool give long handles for leverage, while the WOBANK 8″ tool works one handed in tight spaces and carries 160 nuts and a step drill.

Which tool sets a rivet nut

A rivet nut needs a tool that pulls the mandrel while the nosepiece holds the flange. Hand tools do it with long handles; mandrel sets do it with a wrench or a drill.

  • Long-handle hand tools. The WETOLS 17″ tool carries 11 mandrels; the WOBANK 16″ tool carries 12 mandrels and 230 nuts; the VEVOR 16″ tool carries 13 mandrels and 186 nuts.
  • Tight-space tool. The WOBANK 8″ tool works one handed in narrow gaps and overhead, with 8 mandrels, 160 nuts, a step drill, a wrench and gloves in the box.
  • Drill-driven mandrels. The IYNRAFW mandrel sets fit a manual wrench or an electric power drill, with GCR15 steel bodies and a 12.9-grade alloy mandrel.
  • Auto release. The WOBANK 16″ tool releases the nut on its own after squeezing, and the VEVOR tool (on Amazon) releases with a twist of the knob.

For the hole itself, see the best drill bit set for metal guide.

Can one kit cover both systems?

Yes. Combo kits hold metric and SAE nuts in the same box: the Vifmy kit with 920 pieces holds 460 metric nuts and 460 SAE nuts, and the Vifmy kit with 420 pieces holds 226 metric nuts and 194 SAE nuts. The same holds for tool kits: WETOLS packs 11 mandrels, WOBANK packs 12 and VEVOR packs 13, each spanning metric and SAE sizes. A rivet gun sets a different fastener; the rivet gun vs rivet nut tool guide spells out the difference.

Setting a rivet nut safely. Drilling the hole comes first: wear eye protection, clamp the work, keep gloves away from rotating parts, and keep cords clear of the bit. Set the nut with the tool square to the panel so the threads stay straight. OSHA machine guarding rules cover drill work in the shop.

FAQ for welders

What is a rivet nut?

A rivet nut is a threaded insert that sets into thin material from the front and leaves a fixed thread for a bolt. The flange holds the front of the panel while the setting tool pulls the body tight behind it. It suits sheet metal, tubing and thin panels where a tapped hole would strip.

What sizes do rivet nut kits cover?

Metric kits cover sizes M3 to M12, and SAE kits cover sizes 6-32 to 1/2-13. Combo kits cover both systems in the same box, such as the Vifmy kit with 920 pieces at 460 metric nuts and 460 SAE nuts. Check the sizes a kit names before ordering, because kits vary in which sizes they hold.

Do I need a special tool to set a rivet nut?

Yes, a rivet nut needs a setting tool or a mandrel set. Hand tools such as the WETOLS 17″ tool and the WOBANK 16″ tool pull the nut with long handles, while IYNRAFW mandrel sets fit a manual wrench or an electric power drill.

Can a rivet nut be removed?

Yes, though it takes more work than fitting one. The how to remove a rivet nut guide walks through the options for a nut that spins, strips or sits in the wrong hole. Plan the hole and the size before setting the nut.

Are rivet nuts strong enough for sheet metal?

For the thin panels they are made for, yes: the flange spreads the load across the front of the panel, and a knurled body resists turning in the hole. Zinc plated carbon steel suits shop and farm work, and galvanized nuts resist rust in damp places. Size the nut to the bolt and to the thickness of the panel.

Related: rivet gun vs rivet nut tool, how to remove a rivet nut, best drill for metal, and the metal fab tools hub.

More buying guides