Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bit Set for Metal (2026): 5 Picks for Steel and Stainless

Five 29-piece and 99-piece drill bit sets for metal, compared on point angle, material, shank, size range and case, with scores from the listings.

Best Drill Bit Set for Metal (2026): 5 Picks for Steel and Stainless
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Drill America Cobalt 29-PieceBest OverallDrill America Cobalt 29-Piece9.7/10View on Amazon
  2. 2GMTOOLS M2 29-PieceBest M2 High-Speed Steel SetGMTOOLS M2 29-Piece9.7/10View on Amazon
  3. 3Hi-Spec 99-PieceMost PiecesHi-Spec 99-Piece9.6/10View on Amazon
  4. 4Axelord 4341 29-Piece30-Day Money Back PickAxelord 4341 29-Piece9.6/10View on Amazon

Drilling a clean hole in steel plate starts with the bit, not the drill: a dull or wandering bit leaves an oval hole, a chipped edge and a part that will not fit up square. A set that holds its point, clears chips and stays sharp through stainless and cast iron saves the rework that a worn bit invites. This guide compares the sets on what each listing states, to find the best drill bit set for metal for a home or small shop.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Drill America Cobalt 29-Piece: Cobalt stepped point bits with a 135 degree tip and a 3-flat shank, in a round case, from a maker in business since 1923. Check price on Amazon
  • Best M2 High-Speed Steel Set GMTOOLS M2 29-Piece: M2 high-speed steel with a 135 degree split point, sizes 1/16 to 1/2 inch, an indexed round case and a 30-day money back term. Check price on Amazon
  • Most Pieces Hi-Spec 99-Piece: 99 pieces in 14 sizes from 1/16 to 3/8 inch, titanium nitride coated, in a slimline tray case with a foam insert. Check price on Amazon
  • 30-Day Money Back Pick Axelord 4341 29-Piece: A 29-piece set with a 135 degree tip and a metal indexed case, backed by a 30-day money back term. Check price on Amazon

The machines

GMTOOLS 29PCS Drill Bit Set, M2 HSS, 135°Tip

GMTOOLS 29PCS Drill Bit Set, M2 HSS, 135°Tip

GMTOOLS9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 29-piece M2 high-speed steel set with a 135 degree split point, sizes 1/16 to 1/2 inch, in an indexed round case.

Pros

  • M2 high-speed steel with a 135 degree split point that the maker says centers on its own and cuts with less pressure
  • Full size run from 1/16 to 1/2 inch in 64ths, 29 pieces in an indexed round case
  • Twist design that the maker says clears chips faster
  • 30-day money back term stated in the listing

Cons

  • Title says M2 HSS while the bullets call the material M2 Titanium, so the exact finish is unclear
  • No case dimensions stated
  • Round barrel case has no stated latch or lock detail
  • Shank style not stated, so chuck grip is not described in the listing
Drill America 29 Piece Cobalt Stepped Point Drill

Drill America 29 Piece Cobalt Stepped Point Drill

Drill America9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 29-piece cobalt set with a stepped point, a 135 degree tip and a 3-flat shank, in a round case, from a maker in business since 1923.

Pros

  • Cobalt stepped point bits that the maker says start easier, drill faster, last longer and reduce heat compared with standard bits
  • 135 degree split point tip with a 3-flat shank to prevent spinning
  • Round shank on sizes 11/64 inch and smaller, 3-flat shank on the larger sizes
  • Gold oxide finish and jobber length, in a round storage case

Cons

  • No weight or case dimensions stated in the listing
  • No warranty term stated
  • Cobalt grade is stated in the title and bullets but no grade or percentage is given
  • 29 pieces only, with no larger sizes above 1/2 inch
Axelord 29Pcs Cobalt Drill Bit Set

Axelord 29Pcs Cobalt Drill Bit Set

Axelord9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 29-piece high-speed steel set with a black and gold finish, a 135 degree tip and a metal indexed case.

Pros

  • 135 degree split point that the maker says centers on its own and cuts with less pressure
  • Full size run from 1/16 to 1/2 inch in 64ths, 29 pieces in a metal indexed case
  • Round straight shank with a self-centering design that the maker says prevents walking
  • 30-day money back term stated in the listing

Cons

  • Title says cobalt while the bullets describe high-speed steel, so the material label is unclear
  • No weight stated in the listing
  • No stated coating thickness or grade beyond the black and gold finish
  • Shank length is not stated in the listing
Hi-Spec SAE HSS Drill Bit Set for Metal

Hi-Spec SAE HSS Drill Bit Set for Metal

Hi-Spec9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 99-piece set in 14 sizes from 1/16 to 3/8 inch, titanium nitride coated, in a slimline tray case with a foam insert.

Pros

  • 99 pieces in 14 sizes from 1/16 to 3/8 inch, the widest piece count here
  • Titanium nitride coating that the maker says reduces friction and wear
  • Slimline tray case with a foam insert and a metal catch
  • Stated for metal, wood, plastics and drywall, so the case covers more materials than the metal-only sets

Cons

  • No point angle stated anywhere in the listing
  • Size range stops at 3/8 inch, below the 1/2 inch top size of the 29-piece sets
  • Warranty text is cut off mid-sentence with no term stated
  • Spec table reads NumberOfItems 1, which conflicts with the 99 pieces in the title and bullets
EASTPACE 29Pcs Cobalt Drill Bit Set 1/16"-1/2"

EASTPACE 29Pcs Cobalt Drill Bit Set 1/16"-1/2"

EASTPACE9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 29-piece high-speed steel set with a black and gold finish, a 135 degree split point and an index metal box.

Pros

  • 135 degree split point with a fully ground process that the maker says cuts faster and clears chips
  • Full size run from 1/16 to 1/2 inch in 64ths, 29 pieces in an index metal box
  • Black and gold oxide coating that the maker says increases wear resistance and durability
  • Stated for stainless steel, steel, sheet metal, cast iron, plastic, aluminum alloy and wood

Cons

  • Title says cobalt while the bullets describe high-speed steel, so the material label is unclear
  • No warranty or money back term stated
  • No shank style stated in the listing
  • 3.08 pounds, heavier than the 1.0 pound GMTOOLS set

Other welders and gear to compare

Spec sheet comparison

Model Pieces Material Point Size range Case Warranty
Drill America Cobalt 29-Piece 29 Cobalt, gold oxide finish 135 degree stepped point 1/16 to 1/2 in Round case Not stated
GMTOOLS M2 29-Piece 29 M2 high-speed steel 135 degree split point 1/16 to 1/2 in Indexed round case 30-day money back
Hi-Spec 99-Piece 99 HSS4241, titanium nitride coated Not stated 1/16 to 3/8 in Slimline tray case Not stated
Axelord 4341 29-Piece 29 High-speed steel, black and gold oxide 135 degree split point 1/16 to 1/2 in Metal indexed case 30-day money back
EASTPACE 29-Piece Black Gold 29 High-speed steel, black and gold oxide 135 degree split point 1/16 to 1/2 in Index metal box Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 13 November 2026.

Buying guide: what matters in the best drill bit set for metal

Point angle

The GMTOOLS, EASTPACE, Axelord and Drill America sets state a 135 degree split point, which the makers say centers on its own and cuts with less pressure so the bit walks less on a slick steel surface. The Hi-Spec set states no point angle at all, so its starting behaviour is not described in the listing. A split point is worth checking in the listing before you buy, since a standard point wanders more on hard metal.

Cobalt or high-speed steel

Only the Drill America set states cobalt in its title and its bullets, with a gold oxide finish and a stepped point the maker says starts easier and reduces heat compared with standard bits. The GMTOOLS set states M2 high-speed steel, and the Hi-Spec set states HSS4241 with a titanium nitride coating. The EASTPACE and Axelord titles say cobalt while their bullets describe high-speed steel, so read the bullets rather than the title when the material matters for the metal you drill.

Shank style

The Drill America set states a 3-flat shank to prevent spinning, with a round shank on sizes 11/64 inch and smaller. The Axelord set states a round straight shank with a self-centering design. The other sets state no shank style, so chuck grip is not described in their listings. A spinning shank mars the bit and the chuck, so check the listing for the shank before you buy.

Size range

The 29-piece sets cover 1/16 to 1/2 inch in 64ths, which suits the hole sizes a small shop drills in sheet metal and plate. The Hi-Spec set covers 1/16 to 3/8 inch in 14 sizes, with 99 pieces that include driving bits as well as drill bits. Check the top size in the listing against the largest hole you drill, since a set that stops short leaves you without the size you need.

Storage case

Each set here ships in its own case: an indexed round case for the GMTOOLS set, a round case with a storage holder for the Drill America set, an index metal box for the EASTPACE set, a metal indexed storage case for the Axelord set, and a slimline tray case with a foam insert and a metal catch for the Hi-Spec set. A case that holds each size in its marked slot keeps the set complete and the sizes readable at a glance.

Warranty and money back

The GMTOOLS and Axelord listings state a 30-day money back term. The Hi-Spec warranty text is cut off mid-sentence with no term stated, and the Drill America and EASTPACE listings state no warranty or money back term. A stated term is worth more than a bare promise, so check the listing for the term before you buy.

Use as directed. Clamp the work before drilling, wear eye protection, keep gloves away from rotating parts, and keep guards in place on the drill press. Let the bit cut without forcing it, clear chips with the drill stopped, and stay inside the stated size range of the set. OSHA machine guarding guidance covers drill presses and rotating equipment.

Before You Strike an Arc

  • Clamp the work to the table before the bit touches metal, and check the chuck is tight.
  • Check the size marking on the bit against the hole you need, and confirm the shank fits the chuck.
  • Wear eye protection when drilling metal, and keep gloves away from rotating parts.
  • Start on a center punch mark so the split point seats instead of walking.
  • Check the case on arrival and confirm each size in the listing is present in its slot.

FAQ for welders

What size range does a drill bit set for metal cover?

The 29-piece sets here cover 1/16 to 1/2 inch in 64ths, which suits the hole sizes a small shop drills in sheet metal and plate. The Hi-Spec set covers 1/16 to 3/8 inch in 14 sizes. Check the top size in the listing against the largest hole you drill.

What is a 135 degree split point?

A split point is ground so the bit centers on its own and cuts with less pressure, which the makers say reduces walking on slick steel. The GMTOOLS, EASTPACE, Axelord and Drill America sets state a 135 degree split point; the Hi-Spec set states no point angle. Check the listing for the point angle before you buy.

Is cobalt better than high-speed steel for drilling metal?

The Drill America listing says its cobalt stepped point bits start easier, drill faster, last longer and reduce heat compared with standard bits. The GMTOOLS and Hi-Spec sets state high-speed steel, and the EASTPACE and Axelord titles say cobalt while their bullets describe high-speed steel. Read the bullets rather than the title when the material matters for the metal you drill.

How many bits come in these sets?

The GMTOOLS, EASTPACE, Axelord and Drill America sets hold 29 pieces each. The Hi-Spec set holds 99 pieces in 14 sizes. A larger piece count suits a shop that wants spares and driving bits in the same case.

Do these sets include a storage case?

Each set here ships in its own case: an indexed round case, a round case with a storage holder, an index metal box, a metal indexed storage case, and a slimline tray case with a foam insert. A case with a marked slot for each size keeps the set complete and the sizes readable at a glance.

Related: best twist drill bit set, best drill bit set for wood and metal, hss vs cobalt drill bit, and the drilling set hub. Also see best drill for metal. Also see step drill bit vs hole saw for sheet metal. Also see best step drill bit for sheet metal. Also see best countersink bit cobalt. Also see best magnetic drill press. Also see screw extractor set how to use. Also see best hole saw for sheet metal. Also see sheet metal and tube hub. Also see our tapping wrench. Also see our tapping gel. Also see our best oil for drilling metal. Also see our drilling tool for tight spaces. Also see our best tool belt for sheet metal workers.

More related guides (15)

Scoring, line by line

Each set is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Drill bit sets have no electrical safety listing to state, so every set here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
GMTOOLS M2 29-Piece 9.7 30 21 21 n/a 2
Drill America Cobalt 29-Piece 9.7 32 22 21 n/a 0
Axelord 4341 29-Piece 9.6 28 20 20 n/a 2
Hi-Spec 99-Piece 9.6 28 20 22 n/a 0
EASTPACE 29-Piece Black Gold 9.5 28 20 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides