Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How Thick Is 18 Gauge Metal: Gauge Chart and Sizes

18 gauge metal is one size on the standard gauge scale, and a gauge tool reads the size while a chart gives its decimal equivalent before you cut or weld.

How Thick Is 18 Gauge Metal: Gauge Chart and Sizes
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1PEC Tools Wire & Sheet Metal GaugePEC Tools Wire & Sheet Metal Gauge9.6/10View on Amazon
  2. 2YESWELDER Round Dual Sided Metal Sheet GageYESWELDER Round Dual Sided Metal Sheet Gage9.6/10View on Amazon
  3. 3ZeeDix Standard Dual-Sided Round Wire Cable SheetZeeDix Standard Dual-Sided Round Wire Cable Sheet9.6/10View on Amazon
  4. 4Weewooday 1 Pcs Metal Thickness Gauge Tool WeldingWeewooday 1 Pcs Metal Thickness Gauge Tool Welding9.5/10View on Amazon

You have a sheet on the bench and a weld to plan, and the size stamped on it reads 18 gauge. How thick is 18 gauge metal? It is a size on the standard gauge scale for sheet metal, and the gauge number alone does not tell you the thickness in inches. A sheet metal gauge reads the size, and the decimal equivalent comes from a chart or from the equivalents printed on the tool, so you know what you are cutting and welding before you strike an arc.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

PEC Tools Wire & Sheet Metal Gauge

PEC Tools Wire & Sheet Metal Gauge

PEC Tools9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A hardened steel gauge that covers the full 0 to 36 AWG range for non-ferrous metals, with decimal inch equivalents printed on the reverse side.

Pros

  • Full 0 to 36 AWG range per American Standard specifications
  • Decimal inch equivalents on the reverse side for every gauge size
  • Hardened steel with a satin chrome finish that cuts glare
  • Made in USA, backed by 66+ years of manufacturing

Cons

  • Covers non-ferrous metals only, so steel sheet needs another gauge
  • No warranty term is stated
  • One gauge in the box, with no flat strip gauge alongside it
  • Decimal equivalents sit on the reverse side, so the gauge must be flipped to read them
YESWELDER Round Dual Sided Metal Sheet Gage

YESWELDER Round Dual Sided Metal Sheet Gage

YESWELDER9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack that pairs round dual-sided gauges with flat sheet gauges, in leather packages, for reading sheet and wire size before work starts.

Pros

  • 2 round gauges plus 2 flat sheet gauges in the box
  • Dual-sided round design reads from either side
  • Deeply engraved numbers for clear readings
  • Leather packages protect the gauges in storage and transit

Cons

  • No warranty term is stated
  • 4 pieces in the box to keep track of
  • Stainless steel only, with no hardened steel gauge in the set
  • Suited to uncoated sheet, so coated stock may read differently
ZeeDix Standard Dual-Sided Round Wire Cable Sheet

ZeeDix Standard Dual-Sided Round Wire Cable Sheet

ZeeDix9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A stainless steel round gauge that reads wire diameter and sheet thickness across the 0 to 36 standard range, with marks on both sides.

Pros

  • Covers the full 0 to 36 US standard range
  • Dual-sided design reads marks from all directions
  • Stainless steel build, described by the maker as thick and sturdy
  • Reads wire, sheet, paper and bolts with a single tool

Cons

  • Single round gauge, with no flat strip gauge in the box
  • Needs dry storage to avoid rust
  • 3.35 inch disc is wider than a pocket strip gauge
  • Measures 0 to 36 only, so sizes outside that range need another tool
Weewooday 1 Pcs Metal Thickness Gauge Tool Welding

Weewooday 1 Pcs Metal Thickness Gauge Tool Welding

Weewooday9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pocket-size stainless steel strip gauge, 1.0 inch wide and 2.8 inches long, for a quick thickness check before welding.

Pros

  • Pocket size at 1.0 inch wide and 2.8 inches long
  • Stainless steel with anti-rust and corrosion resistance
  • Reads the most popular welding thicknesses quickly
  • Sturdy and easy to read

Cons

  • One strip in the box, with no round gauge alongside it
  • Square shape only
  • Small 1.0 by 2.8 inch size can be easy to misplace
  • Stainless steel only, with no hardened steel option

How thick is 18 gauge metal

The gauge number is a size name, not a measurement in inches, so a chart, or the decimal equivalents printed on a gauge, translates it into a decimal thickness. The PEC Tools gauge (on Amazon) carries decimal inch equivalents on its reverse side, one for every gauge size, so the reading and the decimal sit on the same tool. The ZeeDix round (on Amazon) gauge also covers the 0 to 36 range, with clear marks on both sides.

Separate charts cover steel, aluminum and stainless, since each metal has its own gauge table. The steel, aluminum and stainless charts linked below give the decimal for each gauge size, and the gauges in this guide read the size off the sheet itself.

How to read a sheet metal gauge

Reading a gauge takes less time than guessing and re-cutting. Slide the edge of the sheet into the slot that fits it, then read the number at that slot.

  • Find the matching slot. Slide the sheet or wire into the slot that fits it snugly, as the YESWELDER gauges are built to do.
  • Read the engraved number. The YESWELDER gauges use deeply engraved numbers, and the ZeeDix gauge has a clear scale on both sides.
  • Check the decimal equivalent. The PEC Tools gauge prints decimal inch equivalents on its reverse side for every gauge size.
  • Check before you weld. The Weewooday and YESWELDER gauges are made to check thickness before welding or working, so the settings match the metal in hand.

A dual-sided gauge reads from either side, and the ZeeDix and YESWELDER round (on Amazon) gauges both use that design. A flat strip gauge like the Weewooday pulls from a pocket for a fast check at the bench.

The four gauges side by side

Product Gauge range Material In the box Gear Score
PEC Tools Wire and Sheet Gauge 0-36 AWG Hardened steel 1 gauge, protective sleeve 9.6/10
YESWELDER Round Gauge 2-Pack Not stated Stainless steel 2 round, 2 flat, 2 leather packages 9.6/10
ZeeDix Round Wire Gauge 0-36 US standard Stainless steel 1 round gauge 9.6/10
Weewooday Pocket Sheet Gauge Not stated Stainless steel 1 strip gauge 9.5/10

The PEC Tools gauge leads on build, with hardened steel and the full 0 to 36 AWG range for non-ferrous metals. The YESWELDER set leads on count, with round and flat gauges in one box. The ZeeDix disc covers the same 0 to 36 range in a single round gauge, and the Weewooday strip is a pocket-size strip at 1.0 by 2.8 inches.

Sheet metal gauges for the shop

Each gauge below reads sheet and wire size before cutting or welding, so the thickness question is settled at the bench, not at the weld.

FAQ for welders

What does 18 gauge mean on a sheet metal gauge?

It is a size on the standard gauge scale. The number is a size name, not a thickness in inches, and a chart, or the decimal equivalents printed on a gauge, gives the matching decimal equivalent. The PEC Tools gauge prints decimal inch equivalents on its reverse side for every gauge size, so the size and the decimal stay together.

How do I measure 18 gauge metal with a gauge tool?

Slide the edge of the sheet into the matching slot until it fits, then read the engraved number at that slot. The YESWELDER gauges use deeply engraved numbers for clear readings, and the ZeeDix gauge has a clear scale on both sides. Check the thickness before welding or cutting, so the settings and fit match the metal in hand.

Can one gauge check wire and sheet metal?

Yes, the round gauges here check both. The ZeeDix gauge measures wire diameter and the thickness of metal, paper and bolts. The PEC Tools gauge measures wire, sheet and plate made of copper, brass, aluminum, silver and other non-ferrous metals. The YESWELDER set checks metal sheet and wire size before welding or working.

What is the difference between a round gauge and a flat sheet gauge?

A round gauge is a disc with slots around the edge, and the ZeeDix disc measures 3.35 inches across. A flat gauge is a straight strip, and the Weewooday strip measures 1.0 inch in width and 2.8 inches in length. The YESWELDER set includes round gauges and flat sheet gauges in the same box, with leather packages for storage.

Do I need a gauge if the sheet is already marked 18 gauge?

A marked size still pays for a check when the sheet came from a mixed pile or an old job. A gauge confirms the size before you cut, and a chart gives the decimal equivalent for fit-up and settings. The PEC Tools gauge carries decimal equivalents on the reverse side, and the ZeeDix gauge reads from both sides.

Related: steel sheet metal gauge chart, aluminum sheet metal gauge chart, stainless sheet metal gauge chart, best sheet metal gauge thickness tool, and best sheet metal tools. Also see the sheet metal and tubing hub.

More buying guides

Welding Consumables ·

Best Torch Tip for Cutting Thick Metal (2026)

Five acetylene cutting torch tips for Victor-style torches, compared on size range, stated cutting data, pack size, and the safety features each listing states.