Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Torch Tip for Cutting Thick Metal (2026)

Five acetylene cutting torch tips for Victor-style torches, compared on size range, stated cutting data, pack size, and the safety features each listing states.

Best Torch Tip for Cutting Thick Metal (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1RX WELD 3-101 4-PackBest OverallRX WELD 3-101 4-Pack9.6/10View on Amazon
  2. 2Pidnsrozo 1-101 4-PackBest 4-Piece SetPidnsrozo 1-101 4-Pack9.6/10View on Amazon
  3. 3RIVERWELD 3-101 Size 1Best Stated Cutting DataRIVERWELD 3-101 Size 19.5/10View on Amazon
  4. 4RX WELD 2-3-101 2-PackBest Size 2 PairRX WELD 2-3-101 2-Pack9.4/10View on Amazon

A cutting torch earns its keep when the plate is thick, the edge is rusted, and the job cannot wait for a saw. The plate sits on the bench, the torch is lit, and the tip decides whether the cut starts clean or drags through a wide, ragged kerf. Picking the best torch tip for cutting thick metal starts with size and series, not brand, and the acetylene tips below are scored on what each listing states about fit, size range, and safety features.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall RX WELD 3-101 4-Pack: Sizes 0 to 3 in one 4-piece pack, stated safety features, and fit for light and medium duty Victor-style torches. Check price on Amazon
  • Best 4-Piece Set Pidnsrozo 1-101 4-Pack: Sizes 0 to 3 with a tip cleaner included, copper alloy build, and stated safety features for heavy duty Victor-style torches. Check price on Amazon
  • Best Stated Cutting Data RIVERWELD 3-101 Size 1: The only listing here that states thickness, cutting oxygen, fuel, preheat and orifice figures for its size 1 tip. Check price on Amazon
  • Best Size 2 Pair RX WELD 2-3-101 2-Pack: A 2-piece pack of size 2 tips with a solid copper outer shell for light and medium duty torches. Check price on Amazon

The machines

RX WELD 3-101 Series Acetylene Cutting Torch Tips

RX WELD 3-101 Series Acetylene Cutting Torch Tips

RX WELD9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece set of 3-101 acetylene tips in sizes 0, 1, 2, and 3 for V-style light and medium duty torches, with a tight-sealing connection and a heat-resistant base stated in the listing.

Pros

  • Sizes 0, 1, 2, and 3 in one pack, from sheet metal to medium-thickness plate
  • States a tight-sealing connection to prevent gas leaks
  • Heat-resistant base protects the torch from overheating
  • Fits V-style light and medium duty torches and CA 1350-90° and 1260-90° attachments

Cons

  • No warranty term is stated in the listing
  • No cutting oxygen, fuel, or preheat figures are stated
  • No tip cleaner is included in the pack
  • No dimensions or weight are stated in the listing
1-101 Acetylene Cutting Torch Tips for Victor

1-101 Acetylene Cutting Torch Tips for Victor

Pidnsrozo9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece set of 1-101 acetylene tips in sizes 0, 1, 2, and 3 for Victor-style heavy duty torches, with a tip cleaner included and stated safety features.

Pros

  • Sizes 0, 1, 2, and 3 in one pack, for light-gauge metal to medium-thickness steel
  • A torch tip cleaner is included with the pack
  • Copper alloy build with precision-machined orifices, as the listing states
  • States a tight-sealing connection and a heat-resistant base

Cons

  • No warranty term is stated in the listing
  • No cutting oxygen, fuel, or preheat figures are stated
  • No dimensions or weight are stated in the listing
2PK 1-1-101 Acetylene Cutting Torch Tips

2PK 1-1-101 Acetylene Cutting Torch Tips

Pidnsrozo9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece set of 1-101 acetylene tips for Victor-style heavy duty torches, with a tip cleaner included and the same stated safety features as the 4-piece Pidnsrozo pack.

Pros

  • Sizes 0-1-101 through 3-1-101 are listed, covering light-gauge metal to medium-thickness steel
  • A torch tip cleaner is included with the pack
  • Copper alloy build with precision-machined orifices, as the listing states
  • States a tight-sealing connection and a heat-resistant base

Cons

  • No warranty term is stated in the listing
  • No cutting oxygen, fuel, or preheat figures are stated
  • Only 2 pieces, so fewer sizes on hand than the 4-piece packs
RIVERWELD Acetylene Cutting Tips 3-101 Size 1

RIVERWELD Acetylene Cutting Tips 3-101 Size 1

RIVERWELD9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece pack of size 1 tips in the 3-101 series for Victor-style oxyfuel cutting torches, the only listing here that states thickness, cutting oxygen, fuel, preheat, and orifice figures.

Pros

  • States a thickness range of 10-20 for the size 1 tip
  • States cutting oxygen 30-35, fuel 3-5, preheat 0.6, and orifice 1.2
  • States dimensions and item weight in the spec table
  • A 2-piece pack, so a spare size 1 tip is on hand

Cons

  • No safety features are stated in the listing
  • No warranty term is stated in the listing
  • A single size, so no larger tip for thicker plate
  • No tip cleaner is included in the pack
RX WELD 2-3-101 Acetylene Cutting Torch Tips

RX WELD 2-3-101 Acetylene Cutting Torch Tips

RX WELD9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece pack of size 2 tips in the 3-101 series for V-style light and medium duty torches, with a solid copper outer shell stated in the listing.

Pros

  • Size 2 suits thicker plate than the size 0 and size 1 tips here
  • Solid copper outer shell, as the listing states
  • Fits V-style light and medium duty torches and CA 1350-90° and 1260-90° attachments
  • A 2-piece pack, so a spare size 2 tip is on hand

Cons

  • No safety features are stated in the listing
  • No warranty term is stated in the listing
  • No cutting oxygen, fuel, or preheat figures are stated
  • A single size, so no smaller tip for sheet metal

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Series Sizes Pack Fuel gas Safety features Warranty
RX WELD 3-101 4-Pack 9.6/10 3-101 0, 1, 2, 3 4 pieces Acetylene Tight seal, heat-resistant base None stated
Pidnsrozo 1-101 4-Pack 9.6/10 1-101 0, 1, 2, 3 4 pieces Acetylene Tight seal, heat-resistant base None stated
Pidnsrozo 1-1-101 2-Pack 9.5/10 1-101 0, 1, 2, 3 2 pieces Acetylene Tight seal, heat-resistant base None stated
RIVERWELD 3-101 Size 1 9.5/10 3-101 1 2 pieces Acetylene None stated None stated
RX WELD 2-3-101 2-Pack 9.4/10 3-101 2 2 pieces Acetylene None stated None stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 10 November 2026.

How to pick the best torch tip for cutting thick metal

Tip size and the thickness it cuts

The listings here cover sizes 0, 1, 2, and 3. The 4-piece packs include all four sizes, from size 0 for sheet metal to size 3 for medium-thickness steel plate, as the listings describe them. The RIVERWELD size 1 states a thickness range of 10-20, with cutting oxygen at 30-35, fuel at 3-5, preheat at 0.6, and an orifice of 1.2, the only listing here that states those figures. For thick plate, the larger sizes in a 4-piece pack give more room than a single size 1 or size 2 tip.

Series and torch fit

Series 1-101 suits Victor-style heavy duty torches, and series 3-101 suits Victor-style light and medium duty torches. The Pidnsrozo packs fit Victor-style heavy duty torches, while the RX WELD 3-101 packs fit V-style light and medium duty torches and name the CA 1350-90° and 1260-90° cutting attachments. Match the series to the torch before ordering, since a 1-101 tip and a 3-101 tip fit different torch bodies.

Pack size and spares

Packs here hold 2 or 4 pieces. A 4-piece pack covers sizes 0 to 3 in one box, while a 2-piece pack holds one size, with a spare of the same size on hand. Keeping a spare matters because a worn or clogged orifice cuts poorly, and the Pidnsrozo packs add a torch tip cleaner for clearing the orifice.

Cleaning and care

A clogged tip preheats unevenly and leaves a rough edge. The Pidnsrozo packs include a torch tip cleaner, and the cleaner is the tool the listing names for the job. Clear the orifice with the cleaner, check the seating surface for nicks, and confirm the tip seats tight on the torch before lighting. Never force a cleaner through an orifice it does not fit.

Use as directed. Check every gas connection for leaks before lighting, keep flammable material clear of the cutting area, and wear eye protection rated for cutting. Acetylene and oxygen are stored under pressure, so keep cylinders upright and chained in place, and close the valves when the work is done. See the OSHA welding overview.

Before You Strike an Arc

  • Confirm the tip series matches the torch: 1-101 for heavy duty Victor-style torches, 3-101 for light and medium duty torches.
  • Check that the tip seats tight and the connection seals, since the listings name a tight-sealing connection as the guard against gas leaks.
  • Confirm the fuel gas is acetylene and the cutting attachment matches the CA 1350-90° or 1260-90° fitting the RX WELD listings name.
  • Inspect the tip orifice on arrival and keep the torch tip cleaner from the Pidnsrozo packs with the torch.
  • Set the workpiece so slag and sparks fall clear of hoses, cylinders, and anything that can burn.

FAQ for welders

What size cutting torch tip do I need?

Match the tip to the thickness of the plate and the series of the torch. The listings here describe size 0 for sheet metal and the larger sizes for medium-thickness steel plate, with the 4-piece packs covering sizes 0 to 3. The RIVERWELD size 1 states a thickness range of 10-20, the only listing here that states a range. When in doubt, the size 3 tip in a 4-piece pack covers the thickest work in this set.

How do I clean a cutting torch tip?

Use a torch tip cleaner, the tool the Pidnsrozo listings include with their packs. Clear the orifice with the cleaner, check the seating surface, and confirm the tip still seats tight before lighting. A tip that stays clogged preheats unevenly and leaves a rough edge.

What is torch cutting?

A cutting torch heats metal with a fuel gas flame, then cuts through the heated metal with a stream of cutting oxygen. The listings here name acetylene as the fuel gas and state cutting oxygen and preheat figures for the RIVERWELD size 1 tip. The tip shapes the flame and the oxygen stream, so its size and orifice set how the cut behaves.

Will these tips fit a Victor-style torch?

The Pidnsrozo tips fit Victor-style heavy duty torches, and the RX WELD and RIVERWELD tips fit Victor-style light and medium duty torches. The RX WELD listings name the CA 1350-90° and 1260-90° cutting attachments. Check the series, 1-101 or 3-101, against the torch before ordering.

How many tips should I keep on hand?

Keep a spare of the size used most, since a worn or clogged tip cuts poorly. The 4-piece packs cover sizes 0 to 3 in one box, which suits a shop that cuts varied plate. The 2-piece packs suit a shop that works one size and wants a spare of it.

Related: welding consumables, Cutting Torch Tips for Oxygen Acetylene Cutting: Sizes and Fit, Oxy-Acetylene Torch Tips: Sizes and Uses, MIG Welding Contact Tips: When and How to Replace Them, and Propane vs Acetylene for Brazing: Which One Should You Buy?.

Scoring, line by line

Each tip is scored on performance, build, value, safety features, and warranty, with the weights published on the How We Pick page. No tip here states a warranty term, so every tip here scores zero on that criterion, and the ranking comes from the other four. Safety scores reflect only the safety features each listing states.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
RX WELD 3-101 4-Pack 9.6 30 21 21 7 0
Pidnsrozo 1-101 4-Pack 9.6 29 20 21 7 0
Pidnsrozo 1-1-101 2-Pack 9.5 28 20 20 7 0
RIVERWELD 3-101 Size 1 9.5 33 22 21 0 0
RX WELD 2-3-101 2-Pack 9.4 28 20 19 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides