Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Oxy-Acetylene Torch Tips: Sizes and Uses

Oxy-acetylene torch tips come in cutting, welding, rosebud and brazing types, and the right one depends on the torch series, the tip size and the job on the bench.

Oxy-Acetylene Torch Tips: Sizes and Uses
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ARCCAPTAIN Oxy Acetylene Torch Kit with Check ValvesARCCAPTAIN Oxy Acetylene Torch Kit with Check Valves9.7/10View on Amazon
  2. 2ARCCAPTAIN Heavy Duty Oxy Acetylene Cutting Torch Kit withARCCAPTAIN Heavy Duty Oxy Acetylene Cutting Torch Kit with9.6/10View on Amazon
  3. 3VEVOR Oxygen Acetylene Torch Kit with Check ValvesVEVOR Oxygen Acetylene Torch Kit with Check Valves9.6/10View on Amazon

A torch handle on its own cuts nothing and joins nothing. The tip on the end decides the job: oxy-acetylene torch tips come in cutting, welding, rosebud heating and brazing types, and each type fits only the torch series it was made for. Pick the wrong series and the tip will not seat; pick the wrong size and the flame will not suit the metal. This guide walks through the types the listings show, the sizes they state, and how to match a tip to a handle before ordering.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Oxy-acetylene torch tips: the four types

The listings show four kinds of tip. Cutting tips in the 1-101 and 3-101 series come in sizes 0, 1, 2 and 3, in packs of 4. Welding tips in the W-1 and W-J series come in sizes 000, 00, 0, 1, 2 and 3, and fit Victor 100 series and J series handles. A rosebud heating tip, the 4-MFA-1, spreads the flame over a wide area for heating, and a brazing tip, the MTF-5, puts out five flames from a five-hole outlet for copper pipe work. The series number is the first thing to match: a tip made for one series does not fit another.

Side by side

Cutting tips Welding tips Rosebud heating tips Brazing tips
Series in the listings 1-101, 3-101 W-1, W-J 4-MFA-1 MTF-5
Sizes listed 0, 1, 2, 3 000, 00, 0 and 1, 2, 3 One size listed 19/16 in
Fits Victor-style heavy duty or light/medium duty cutting torches Victor 100 or J series handles Victor 100 Series handles Uniweld 71 and WH550 handles
Job Cutting steel Welding and brazing Large-area heating Copper pipe brazing
Material stated Copper alloy (1-101) High-purity copper (W-1 alloy) Heat-resistant copper Brass and stainless steel
Pack in the listings 4 pieces 3 pieces 1 piece 1 piece
Flame outlet Precision-machined orifices (1-101) Precision machined Evenly distributed flame orifices Five-hole flame outlet

Series numbers are not interchangeable across handles. A W-J tip fits only a J series handle and will not fit a 100 or 300 series handle, and a W-1 tip fits only a 100 series handle and will not fit a 300 or J series handle. The cutting series split the same way: the 1-101 series fits heavy duty cutting torches, and the 3-101 series fits light and medium duty cutting torches.

Cutting tips: 1-101 and 3-101

The listings sell cutting tips in packs of 4 in sizes 0, 1, 2 and 3, for work from light-gauge metal to medium-thickness steel. The 1-101 series fits a Victor-style heavy duty cutting torch and the CA 2460-90° cutting attachment. The 3-101 series fits a Victor-style light and medium duty cutting torch and the CA 1350-90° and 1260-90° cutting attachments. The Pidnsrozo 1-101 (on Amazon) listing states a copper alloy body with precision-machined orifices, and both series state a tight-sealing connection that keeps gas from leaking at the joint. The Pidnsrozo 1-101 set lists product dimensions of 3.0 inches by 1.4 inches by 3.0 inches and comes with a torch tip cleaner, and the best cutting torch tip cleaner tool guide covers the cleaners made for the job.

Welding tips: W-1 and W-J

The W-1 series is high-purity copper alloy and the W-J series is high-purity copper, made for welding and brazing with oxygen and acetylene. The W-1 series fits Victor 100 series handles in sizes 1, 2 and 3, and a second W-1 set covers sizes 000, 00 and 0. The W-J series fits Victor J series light torch handles in sizes 1, 2 and 3, and will not fit 100 or 300 series handles. The W-J listing sizes the work by metal thickness: size 1 suits 2-10mm thin plates and fine brazing, size 2 suits 10-20mm metal parts, and size 3 suits 20-30mm workpieces. The W-1 listing gives no thickness figures, so match it by the handle series and the size number alone. One listing needs care: the W-1 set titled for sizes 000, 00 and 0 repeats the 1, 2 and 3 set description in its bullets, so trust the title and the size field for what the set holds. The W-J set lists 5.0 inches by 2.0 inches by 0.7 inches, the W-1 set lists 6.0 inches by 2.0 inches by 0.5 inches, and the maker of the W-J set claims a service life more than 30% longer than similar products.

Rosebud heating tips: 4-MFA-1

A rosebud tip heats a wide area instead of cutting a line or laying a bead. The 4-MFA-1 is a medium-duty rosebud torch tip made of heat-resistant copper, with evenly distributed flame orifices that give a high-temperature swirl flame for large-area heating. It fits Victor 100 Series torch handles, including the V-Style100C, WH26 and WH260, and it works with oxy-acetylene for heating, brazing and metal fabrication. The listing gives a weight of 0.1 pounds and product dimensions of 2.0 inches by 1.0 inches by 11.0 inches.

Brazing tips: MTF-5

The MTF-5 is a five-flame brazing torch tip for Uniweld 71 and WH550 welding handles, made for copper pipe brazing and heating work. Its five-hole flame outlet wraps the pipe in heat from all sides, which suits HVAC maintenance and pipeline brazing. The listing states 5600°F, 6.65in and a 19/16 inch size, and lists brass and stainless steel construction with product dimensions of 2.0 inches by 6.0 inches by 0.7 inches. For the joint itself, flux matters as much as flame: the best brazing flux for copper pipe guide covers the fluxes made for the same work.

How to match a tip to your torch

Match the tip in three steps. First, read the handle series off the torch, and buy only the series that fits it: the listings here cover 100 and J series handles. Second, read the cutting attachment where a cutting tip is involved: the CA 2460-90° attachment takes the 1-101 series, and the CA 1350-90° and 1260-90° attachments take the 3-101 series. Third, pick the size for the metal: the W-J sizes run from thin plates at size 1 to 20-30mm workpieces at size 3, and the cutting sizes run 0 to 3 for light-gauge metal up to medium-thickness steel. Check the mixer and the thread size against the handle before ordering, and keep a tip cleaner on hand. A full torch set with the handle included is a different buy from a tip on its own: the best oxy-acetylene torch kit for home shop guide covers complete kits, and the best acetylene regulator for torch guide covers the regulator that feeds it.

Treat the torch as a compressed gas tool: keep cylinders upright and chained, keep the flame clear of anything flammable, and wear the eye protection the work calls for.

FAQ for welders

What size oxy-acetylene torch tip fits the job?

Match the size to the metal and the series to the handle. The W-J listing sizes the work by thickness: size 1 for 2-10mm thin plates and fine brazing, size 2 for 10-20mm metal parts, and size 3 for 20-30mm workpieces. For cutting tips, sizes run 0 to 3, from light-gauge metal to medium-thickness steel.

Will a W-J tip fit a Victor 100 series handle?

No. The W-J series fits only Victor J series light torch handles, and the listing states the tips will not fit 100 or 300 series handles. For a 100 series handle, the W-1 series is the matching tip, in sizes 1, 2 and 3 or in sizes 000, 00 and 0.

What is a rosebud torch tip for?

A rosebud tip heats a wide area of metal, for heating, brazing and metal fabrication work. The 4-MFA-1 in the listings is a medium-duty rosebud for Victor 100 Series handles, made of heat-resistant copper with evenly distributed flame orifices.

What is the difference between a 1-101 and a 3-101 cutting tip?

Both come in sizes 0, 1, 2 and 3 in packs of 4. The difference is the torch they fit: the 1-101 series fits a heavy duty cutting torch and the CA 2460-90° cutting attachment, while the 3-101 series fits a light and medium duty cutting torch and the CA 1350-90° and 1260-90° cutting attachments.

What does the MTF-5 brazing tip fit?

The MTF-5 fits Uniweld 71 and WH550 welding handles. It is a five-flame brazing tip with a five-hole flame outlet, listed at 5600°F and 6.65in, made for copper pipe brazing and HVAC work, with brass and stainless steel construction.

Related: brazing torch vs cutting torch, plasma cutter vs oxy-acetylene torch, oxy-propane vs oxy-acetylene torch, and the welding consumables hub.

More buying guides

Metal Fab Tools ·

Oxy Acetylene Torch Types Explained

Cutting, welding, brazing and heating torches all burn the same gases, but each one shapes the flame for a different job.

Welding Safety Gear ·

Oxy Acetylene Torch Safety: Gear and Practices

Oxy acetylene torch safety starts with a flashback arrestor on each gas line: torch-end and regulator-end sets compared on pressure figures, threads and fit.