Best Acetylene Regulator for Torch (2026): 5 Sets Compared
Acetylene regulator sets for torch work with CGA-510 and CGA-200 inlets, B-size and A-size outlets and stated delivery ranges, ranked by Gear Score.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJZWELD Regulator Set9.7/10View on Amazon - 2
Best Pro PickVictor EDGE ESS3 Set9.6/10View on Amazon - 3
Best MC PickRX WELD Regulator Set9.6/10View on Amazon - 4
Best Brass ValueVEVOR Regulator Set9.5/10View on Amazon - 5
Best A-Size PickAWLOLWA Regulator Set9.5/10View on Amazon
A cutting torch that starves or surges at the tip usually points back to the regulator, not the torch. The acetylene regulator sets the delivery pressure from the cylinder, and the wrong inlet fitting means the regulator never mounts to the tank at all. Finding the best acetylene regulator for torch work means matching the acetylene inlet to the cylinder valve, matching the outlet fitting to the hose, and checking the stated delivery range before ordering.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall JZWELD Regulator Set: CGA510 acetylene inlet with the fullest stated pressure figures here Check price on Amazon
- Best Pro Pick Victor EDGE ESS3 Set: Victor EDGE set with color-coded knobs and ergonomic design Check price on Amazon
- Best MC Pick RX WELD Regulator Set: CGA200 set with full stated pressures for small MC cylinders Check price on Amazon
- Best Brass Value VEVOR Regulator Set: Brass set with extended T-handle and clear inlet gauges Check price on Amazon
- Best A-Size Pick AWLOLWA Regulator Set: A-size 3/8-24 set with a built-in flow meter Check price on Amazon
The machines

JZWELD Oxygen Acetylene Regulators
Oxygen and acetylene regulator set with CGA540 and CGA510 inlets, brass body, dual gauges and a T-handle.
Pros
- Fullest stated pressure figures here, on both regulators
- CGA510 acetylene inlet for full-size acetylene cylinders
- Solid brass construction with large-diaphragm dual gauges
- T-handle for hand adjustment and precise control, per the listing
Cons
- Acetylene inlet will not fit small MC or B tanks, per the listing
- No warranty term is stated on the listing
- No safety listing standard is stated on the listing
- Set only, so the oxygen regulator comes with it whether needed or not

TWSupply Victor EDGE ESS3 Oxygen & Acetylene
Victor EDGE ESS3 oxygen and acetylene regulator set with CGA-540 and CGA-510 inlets and B-size outlets.
Pros
- Victor EDGE series set designed for professional welding and cutting, per the listing
- Color-coded control knobs for fast gas identification
- Enhanced gauge graphics with large dials for quick adjustment
- Ergonomic design for natural hand and body positioning, per the listing
Cons
- No outlet pressure figures are stated on the listing
- No warranty term is stated on the listing
- No safety listing standard is stated on the listing
- Acetylene inlet is not for use with B or MC tanks, per the listing

RX WELD Oxy Acetylene Regulator Set
Oxygen and acetylene regulator set with CGA-540 and CGA200 inlets, brass body and a PC-handle.
Pros
- Full stated pressure figures on both regulators
- CGA-540 oxygen inlet with 0-4000 PSI inlet pressure stated
- Brass body stated to withstand harsh environments
- Outlet hose connector nut included, per the listing
Cons
- Acetylene inlet fits only small MC tanks, per the listing
- Will not fit propane tanks or disposable MAPP canisters, per the listing
- No warranty term is stated on the listing
- No safety listing standard is stated on the listing

VEVOR Oxygen Acetylene Regulator Set
Oxygen and acetylene regulator set with CGA-540 and CGA-200 inlets, brass build and an extended T-handle.
Pros
- Brass build stated for airtight sealing and high-pressure resistance
- Extended T-handle for comfortable grip and smooth turning, per the listing
- Clear inlet gauge displays at 0-4000 PSI oxygen and 0-400 PSI acetylene
- Right-hand oxygen and left-hand acetylene 9/16"-18 outlets, per the listing
Cons
- Acetylene inlet fits small MC cylinders only, per the listing
- No outlet pressure figures are stated on the listing
- No warranty term is stated on the listing
- No safety listing standard is stated on the listing

AWLOLWA Oxygen Acetylene Regulator Set,A Size
Oxygen and acetylene regulator set with A-size 3/8"-24 hose fittings and a built-in flow meter.
Pros
- Built-in flow meter for adjusting gas flow rate, per the listing
- Full stated pressure figures on both regulators
- CGA540 oxygen inlet with 0-4000 PSI inlet pressure stated
- Stated compatibility with most V-Type kits, per the listing
Cons
- A-size outlets will not mate with B fitting hoses
- Acetylene regulator only fits CGA200 MC tanks, per the listing
- No warranty term is stated on the listing
- No safety listing standard is stated on the listing
Other welders and gear to compare
YSmikiya Acetylene Regulator Welding Gas Welder AcetyleneCheck price on Amazon
2pcs Dual Welding Gas RegulatorsCheck price on Amazon
Oxygen Acetylene Regulator SetCheck price on Amazon
VAPHY Oxygen Acetylene Flashback Arrestors Set Regulator EndCheck price on Amazon
Set of Victor G350 Oxygen & Acetylene RegulatorsCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Acetylene inlet | Oxygen inlet | Acetylene outlet | Outlet fitting | Warranty |
|---|---|---|---|---|---|---|
| JZWELD Regulator Set | 9.7/10 | CGA510 | CGA540 | 0-30 PSI | 9/16″-18 | Not stated |
| Victor EDGE ESS3 Set | 9.6/10 | CGA-510 | CGA-540 | Not stated | 9/16″-18 | Not stated |
| RX WELD Regulator Set | 9.6/10 | CGA200 | CGA-540 | 0-30 PSI | 9/16″-18 | Not stated |
| VEVOR Regulator Set | 9.5/10 | CGA-200 | CGA-540 | Not stated | 9/16″-18 | Not stated |
| AWLOLWA Regulator Set | 9.5/10 | CGA200 | CGA540 | 0-15 PSI | 3/8″-24 | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 29 October 2026.
Buying guide: the best acetylene regulator for torch
Acetylene inlet: CGA-510 or CGA-200
The acetylene inlet is the first check, because it decides which cylinder the regulator mounts to. The JZWELD and Victor EDGE sets use a CGA-510 acetylene inlet, and both listings state the CGA-510 inlet will not fit small MC or B acetylene tanks. The RX WELD, VEVOR and AWLOLWA sets use a CGA-200 acetylene inlet, and the RX WELD listing states the small acetylene regulator fits only small acetylene MC tanks with a CGA-200 valve, and will not fit larger acetylene tanks, propane tanks or disposable MAPP or propane canisters. Buying the wrong inlet means buying a regulator that cannot mount to the cylinder on hand.
Outlet pressure and delivery range
Stated outlet figures differ by listing. The JZWELD acetylene regulator states an outlet pressure of 0-30 PSI with a delivery range of 0-15 PSI, and its oxygen regulator states an outlet pressure of 0-200 PSI with a delivery range of 5-200 PSI. The RX WELD acetylene regulator states an output pressure of 0-30 PSI, and its oxygen regulator states an output pressure of 0-100 PSI. The AWLOLWA acetylene regulator states an outlet pressure of 0-15 PSI, and its oxygen regulator states an outlet pressure of 0-100 PSI. The Victor EDGE and VEVOR listings state inlet gauge figures but no outlet pressure figures, so their delivery ranges stay unstated. Inlet pressures stated across the listings run to 0-4000 PSI on oxygen and 0-400 PSI on acetylene.
Outlet fitting: B-size or A-size
Outlet fittings decide which hose connects. The JZWELD, RX WELD, Victor EDGE and VEVOR sets use B-size outlet connections at 9/16″-18, with the VEVOR listing noting a right-hand oxygen connection and a left-hand acetylene connection. The AWLOLWA set uses A-size 3/8″-24 hose fittings instead, and states compatibility with most V-Type kits. A hose with B fittings will not mate with an A-size regulator outlet, so the fitting size must be checked against the hose already owned before ordering.
Gauges, handles and build
Gauge and handle details differ across the listings. The JZWELD set states a dual gauge design with large diaphragms for constant pressure delivery, a solid brass body and a T-handle for hand adjustment. The Victor EDGE set states enhanced gauge graphics, large dials, color-coded control knobs for fast gas identification and an ergonomic design for hand and body positioning. The RX WELD set states a brass body and a PC-handle, with an outlet hose connector nut included. The VEVOR set states a premium brass build and an extended T-handle design. The AWLOLWA set states a built-in flow meter for adjusting gas flow rate.
Every pick here is a pair
Each of these listings is an oxygen and acetylene regulator set, not a single acetylene regulator on its own. The oxygen regulator in each set uses a CGA-540 inlet, which the JZWELD listing states fits American oxygen tanks with a CGA-540 valve. For torch work, the pair matters because the torch needs both gases regulated, but the acetylene inlet is the fitting that varies most across the sets, so it drives the choice.
Before You Strike an Arc
- Match the acetylene inlet to the cylinder valve: CGA-510 for full-size tanks, CGA-200 for MC tanks only.
- Match the outlet fitting to the hose: B-size 9/16″-18 on most sets here, A-size 3/8″-24 on the AWLOLWA set.
- Check the stated delivery range against the torch work planned, since the Victor EDGE and VEVOR listings state no outlet pressure figures.
- Never fit a CGA-200 acetylene regulator to a propane tank or a disposable canister, per the RX WELD listing.
FAQ for welders
What is the difference between a CGA-510 and a CGA-200 acetylene inlet?
The CGA-510 inlet fits full-size acetylene cylinders, and the JZWELD and Victor EDGE listings state it will not fit small MC or B acetylene tanks. The CGA-200 inlet fits small MC acetylene cylinders only, per the RX WELD, VEVOR and AWLOLWA listings. The inlet thread decides which cylinder the regulator mounts to, so it must match the cylinder on hand.
Will a CGA-200 acetylene regulator fit a full-size acetylene tank?
No. The RX WELD listing states its small acetylene regulator fits only small acetylene MC tanks with a CGA-200 valve, and will not fit larger acetylene tanks. For a full-size acetylene cylinder, pick a set with a CGA-510 acetylene inlet, such as the JZWELD or Victor EDGE sets here.
What outlet fitting do I need for my torch hose?
Most sets here use B-size 9/16″-18 outlet connections for 1/4 inch B fittings twin welding hose, per the RX WELD listing. The AWLOLWA set uses A-size 3/8″-24 hose fittings instead. Check the hose fitting size before ordering, since a B fitting will not mate with an A-size outlet.
Do these sets include both regulators?
Each listing here is an oxygen and acetylene regulator set: the JZWELD, RX WELD, Victor EDGE, AWLOLWA and VEVOR listings each include one oxygen regulator and one acetylene regulator. The oxygen regulator in each set uses a CGA-540 inlet.
What pressures do these regulators deliver?
Stated acetylene outlet figures here are 0-30 PSI on the JZWELD and RX WELD sets and 0-15 PSI on the AWLOLWA set, while the Victor EDGE and VEVOR listings state no outlet pressure figures. Stated oxygen outlet figures are 0-200 PSI on the JZWELD set and 0-100 PSI on the RX WELD and AWLOLWA sets. Inlet gauge figures stated run to 0-4000 PSI on oxygen and 0-400 PSI on acetylene.
Scoring, line by line
Each regulator set is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing here states a safety listing standard, so every set here scores zero on that criterion; the ranking comes from the other criteria. No listing here states a warranty term, so every set also scores zero on warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| JZWELD Regulator Set | 9.7 | 32 | 21 | 21 | n/a | 0 |
| Victor EDGE ESS3 Set | 9.6 | 29 | 22 | 19 | n/a | 0 |
| RX WELD Regulator Set | 9.6 | 29 | 20 | 20 | n/a | 0 |
| VEVOR Regulator Set | 9.5 | 29 | 20 | 19 | n/a | 0 |
| AWLOLWA Regulator Set | 9.5 | 28 | 19 | 20 | n/a | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.
More welding guides
Also see our oxy propane vs oxy acetylene torch, argon flow meter vs regulator, cutting torch tip cleaner tool and brazing torch vs cutting torch guides, plus the welding consumables hub.




