Stainless Sheet Metal Gauge Chart and Thickness Guide
Stainless sheet metal gauge chart: what the gauge numbers mean, the thicknesses the listings state for 16 and 20 gauge, and how to measure a sheet before welding.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
2pcs Wire Gauge Measuring Tool & Metal Sheet9.5/10View on Amazon - 2
Cosmostar 2 Pcs Stainless Steel Welding Gauge Set9.5/10View on Amazon - 3
Yudylg 5 Pack 20 Gauge Sheet Metal Steel9.5/10View on Amazon - 4
Metoro 16-Gauge Mild CRS Steel Sheet - Formable9.4/10View on Amazon
A patch panel cut to size, a bead that will not sit right, and a sheet that flexes where the fit-up needs it stiff: that is the moment the stainless sheet metal gauge chart starts to matter. The chart pairs each gauge number with the thickness it stands for, so the sheet on the bench matches the number on the order. Gauge numbers run backward, a higher number is a thinner sheet, and measuring the sheet in hand settles it.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Below: the chart itself, how to read a gauge number, how to measure a sheet, and the gauges and sheets for the bench.

2pcs Wire Gauge Measuring Tool & Metal Sheet
A 2-piece stainless steel gauge set with a thickness gauge covering 0 to 2 in and a round cable gage covering 0.3125 in to 0.007 in, on an SWG scale of 0 to 36.
Pros
- Measures sheet thickness and wire diameter
- SWG scale from 0 to 36
- Stainless steel, will not rust in dry environments
- Dual-sided round cable gage included
Cons
- No warranty term is stated
- No certification is stated
- 1/16 in increment is coarse for thin sheet
- No storage case stated in the listing

Cosmostar 2 Pcs Stainless Steel Welding Gauge Set
A 2-piece stainless steel welding gauge set with a wet film comb covering 25 to 3,000 um and a dual-sided round wire cable gauge with laser-engraved markings.
Pros
- Measures from 25 to 3,000 um
- Dual-sided design with laser-engraved markings
- Stainless steel, rust-proof per the listing
- Fits a toolbox or pocket
Cons
- No warranty term is stated
- No certification is stated
- No gauge scale is stated
- No thickness range in inches is stated

Yudylg 5 Pack 20 Gauge Sheet Metal Steel
A 5-pack of 20 gauge cold rolled steel sheets, 12 in x 6 in at 0.039 in (1 mm), for cutting, shaping and welding.
Pros
- 20 gauge at 0.039 in (1 mm) stated
- 5-pack for repeat projects
- Cold rolled steel, smooth uniform surface
- Weldable, bendable and shapeable per the listing
Cons
- Mild steel, not stainless
- No warranty term is stated
- No certification is stated
- No other size is listed

Metoro 16-Gauge Mild CRS Steel Sheet - Formable
A 2-pack of 16 gauge mild cold rolled steel sheets, .060 x 12 x 8, with a smooth surface for welding and forming.
Pros
- 16 gauge at .060 stated
- 2-pack for repeat projects
- Cold-rolled steel, smooth surface
- Magnetic, formable and weldable per the listing
Cons
- Mild steel, not stainless
- No warranty term is stated
- No named certification is stated
Stainless Sheet Metal Gauge Chart: The Chart
The listings in this guide state a thickness for the gauge numbers in the chart below. The chart pairs each gauge number with the thickness its listing states, in inches and in millimetres where the listing gives them.
| Gauge | Thickness stated | Listing |
|---|---|---|
| 16 gauge | .060 in | Metoro 16 Ga 2-Pack |
| 20 gauge | 0.039 in (1 mm) | Yudylg 20 Ga 5-Pack |
Only the sheets state a thickness per gauge number; the gauge sets state the ranges they measure instead. The WeldingStop set pairs a thickness gauge covering 0 to 2 in with a round cable gage covering 0.3125 in to 0.007 in on an SWG scale of 0 to 36, and the Cosmostar gauge covers 25 to 3,000 um.
Side by Side
| Product | Type | Gauge | Thickness stated |
|---|---|---|---|
| WeldingStop Gauge Set | Gauge set | SWG 0 to 36 | 0 to 2 in |
| Cosmostar Gauge Set | Gauge set | Not stated | 25 to 3,000 um |
| Yudylg 20 Ga 5-Pack | Sheet, 5-pack | 20 gauge | 0.039 in |
| Metoro 16 Ga 2-Pack | Sheet, 2-pack | 16 gauge | .060 in |
The table above sets the gauges beside the sheets: the gauges measure thickness, the sheets state it. Match the gauge range to the sheet thickness before ordering.
How to Read the Gauge Number
A gauge number is a position on a scale, not a thickness on its own. Read the number, then read the thickness the listing pairs with it: 16 gauge at .060 in, 20 gauge at 0.039 in. A higher gauge number is a thinner sheet, so a sheet ordered by gauge number alone can arrive thinner than the job needs. Check the thickness in inches or millimetres on the listing, and measure the sheet on arrival with a gauge.
How to Measure Sheet Thickness
Match the sheet to the gauge slot that fits it, and read the marking on the slot. The WeldingStop set pairs a thickness gauge covering 0 to 2 in in 1/16 in increments with a round cable gage covering 0.3125 in to 0.007 in on an SWG scale of 0 to 36. The Cosmostar set pairs a wet film comb covering 25 to 3,000 um with a dual-sided round wire cable gauge. Our picks for the best sheet metal gauge thickness tool compare gauge sets side by side.
Sheet Metal Gauges and Sheets for the Bench
The gear below handles the measuring and the material: the gauge sets measure the sheet in hand, and the sheets give the bench stock to cut, shape and weld.
FAQ for welders
What thickness is 20 gauge sheet metal?
0.039 in, or 1 mm, per the Yudylg listing in this guide. That figure is the thickness the listing states for its 20 gauge sheets, each 12 in x 6 in. Check the listing for the thickness in inches before ordering, since gauge numbers alone do not state it.
What thickness is 16 gauge sheet metal?
.060 in, per the Metoro listing in this guide, for sheets sized .060 x 12 x 8. The spec table on that listing gives 0.118 in instead, so read the title and size figures, which state .060. A gauge set confirms the thickness on arrival.
How do I measure sheet metal thickness?
With a sheet metal gauge: match the sheet to the slot that fits it and read the marking. The WeldingStop set in this guide pairs a thickness gauge covering 0 to 2 in with a round cable gage covering 0.3125 in to 0.007 in on an SWG scale of 0 to 36, and the Cosmostar gauge covers 25 to 3,000 um. Measure before welding, since the gauge number alone does not state the thickness.
What is the difference between a gauge number and a thickness?
A gauge number is a position on a scale; a thickness is the measured figure in inches or millimetres. The chart above pairs 16 gauge with .060 in and 20 gauge with 0.039 in, using the thicknesses the listings state. The gauge set reads the number, and the listing states the thickness it stands for.
Can I weld 20 gauge sheet metal?
Yes, with the right setup: the Yudylg listing states its 20 gauge sheets suit cutting, shaping and welding, and are compatible with most welding techniques and tools. The Metoro listing states its 16 gauge sheets suit welding and forming. Check the machine door chart or manual for the settings the thickness needs.
Related: metal fab tools hub, our best sheet metal gauge thickness tool, the best MIG wire for stainless steel and the best sheet metal shears. Also see the best deburring tool for stainless steel.




