Best Sheet Metal Shears (2026): 4 Picks Scored
Four sheet metal shears compared on capacity and power, from a 20V cordless swivel-head shear to hand snips.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDEWALT DCS491B 20V MAX Shear9.5/10View on Amazon - 2
Drill AttachmentMalco TS1 TurboShear9.5/10View on Amazon - 3
Corded PickDEWALT DW890 Corded Shear9.5/10View on Amazon - 4
Hand SnipsKlein 1202S Aviation Snips9.4/10View on Amazon
You have a sheet of 18 gauge that needs a clean straight cut, and tin snips will leave your hand cramping. The best sheet metal shears match the cutter to the job: a powered shear for long runs or a drill attachment for occasional cuts. This guide compares four on what each listing states: capacity, power, weight and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall DEWALT DCS491B 20V MAX Shear: 20V cordless, 360 degree swivel head, 18 gauge; 3 year limited warranty. Check price on Amazon
- Drill Attachment Malco TS1 TurboShear: Inserts into a 14.4V+ drill chuck; 20 gauge, 1 year warranty. Check price on Amazon
- Corded Pick DEWALT DW890 Corded Shear: 5 amp motor, 360 degree swivel head, 100-350 spm variable speed. Check price on Amazon
- Hand Snips Klein 1202S Aviation Snips: Straight cut, 18 ga steel and 22 ga stainless; 1-1/2 in cut. Check price on Amazon
The machines

DEWALT 20V MAX Metal Shear, Swivel Head, 18GA
A 20V cordless shear with a 360 degree tool-free swivel head, 18 gauge capacity, and a 3 year limited warranty.
Pros
- 360 degree tool-free swivel head for tight quarters
- Cuts 7/32 in strips that curl out for a clear line
- 3 year limited warranty, the strongest stated here
- Cordless: take the tool to the work
Cons
- Tool only: no battery or charger included
- No stated safety standard or certification
- 4 lb plus battery weight in hand
- No stated cut radius

Malco TS1 TurboShear 20 Gauge Capacity Sheet Metal
A shear head that inserts into a 14.4 volt or larger drill chuck, with 20 gauge capacity, an aluminum cast head and dual ball bearings.
Pros
- Turns an existing drill into a shear
- Navigates tight patterns and square cuts
- Lightweight aluminum cast head, dual ball bearings
- 1 year stated warranty
Cons
- 20 gauge is the thinnest stated capacity here
- Needs a 14.4V or larger drill you already own
- No stated safety standard or certification

DEWALT Metal Shear, Swivel Head, 18GA (DW890)
A corded 5 amp shear with a 360 degree swivel head, variable speed from 100 to 350 spm, and 18 gauge capacity.
Pros
- 5 amp all ball bearing motor
- 360 degree swivel head
- Variable speed dial, 100-350 spm
- Cuts 7/32 in strip and 5-1/2 in radius or larger
Cons
- No warranty term stated
- 4.7 lb is the heaviest handheld here
- No stated safety standard or certification
- Corded: needs an outlet at the work

Klein Tools 1202S Metal Shears, Aviation Snips
A straight-cutting aviation snip with serrated heat-treated steel blades, rated for 18 gauge steel and 22 gauge stainless steel.
Pros
- Cuts 18 gauge steel and 22 gauge stainless steel
- Serrated blades forged from heat-treated steel
- Self-open latch for one-handed operation
- Color-coded contoured grips
Cons
- Warranty field reads TWN, no stated term
- No stated safety standard or certification
- Hand powered: slowest of the four
Other welders and gear to compare
Sheet Metal Cutter for DrillCheck price on Amazon
VEVOR Sheet Metal BrakeCheck price on Amazon
WEN Metal ShearCheck price on Amazon
KAKA INDUSTRIAL Metal BrakeCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Type | Capacity | Power | Weight | Warranty |
|---|---|---|---|---|---|---|
| DEWALT DCS491B 20V MAX Shear | 9.5/10 | Cordless electric | 18 GA | 20V battery | 4 lb | 3 years |
| Malco TS1 TurboShear | 9.5/10 | Drill attachment | 20 GA | Drill 14.4V+ | 1 lb | 1 year |
| DEWALT DW890 Corded Shear | 9.5/10 | Corded electric | 18 GA | 5A corded | 4.7 lb | None stated |
| Klein 1202S Aviation Snips | 9.4/10 | Hand snips | 18 GA steel, 22 GA stainless | Manual | 14.4 oz | None stated |
All specs here repeat what the maker rates and the listing prints, copied down 19 October 2026.
Buying guide: best sheet metal shears
Attachment, handheld, or hand snips
These four cover three different tools. The Malco TS1 is a shear head that inserts into a drill you already own. The two DEWALT shears are handheld powered cutters, one cordless and one corded. The Klein 1202S is a hand snip for trim work.
Capacity as stated
Compare the numbers each listing gives, without converting between them. The TS1 states 20 gauge. The DCS491B and DW890 state 18 gauge and both cut a 7/32 inch strip. The Klein states 18 gauge steel and 22 gauge stainless steel.
Swivel heads and tight patterns
Both DEWALT shears have a 360 degree swivel head, which helps in tight quarters, and the DW890 adds a variable speed dial (100-350 spm). The TS1 is built for tight patterns and square cuts. The strips the powered shears cut curl out of the cutting area, which the makers say keeps the line of sight clear.
Warranty in writing
Only two listings state a warranty term. The DCS491B carries a 3 year limited warranty, the strongest stated here. The TS1 states 1 year. The other two give no term, so a failed motor is on you.
Corded, cordless, drill attachment or manual
The four picks cover four power styles, and the right one follows your work. The DEWALT DCS491B runs on a 20V battery with a 360 degree tool-free swivel head at 4 lb, which suits cutting on ladders, roofs and job sites where no outlet is near. The DEWALT DW890 is corded with a 5 amp all ball bearing motor, a variable dial from 100 to 350 spm and a 360 degree swivel head, which suits long shop sessions where runtime is unlimited. The Malco TS1 is a drill chuck shear attachment needing a 14.4V or larger drill, corded or cordless, which suits anyone who already owns a drill and cuts occasionally. The Klein 1202S is hand snips at 14.4 oz for detail cuts.
Think about where the cutting happens. Overhead and remote work favor the 20V cordless; a workbench favors the corded shear; occasional cuts favor the drill attachment you already own. The drill attachment needs the drill to meet the 14.4V minimum, so check your drill before buying.
Gauge capacity and what it means
Gauge runs backward: a lower number means thicker steel. The DEWALT DCS491B and DW890 list 18 GA capacity, the Malco TS1 lists 20 GA, and the Klein 1202S lists 18 GA steel and 22 GA stainless steel. Match the capacity to your stock: ductwork and flashing run thin, auto body panels sit around 18 to 20 GA.
Before You Strike an Arc
- Check blade alignment and tightness on arrival before the first cut.
- Have power ready: the cordless shear runs on 20V, the attachment needs a 14.4 volt or larger drill, the corded shear needs an outlet.
- Wear eye protection and gloves; freshly cut edges stay sharp.
Use as directed. Keep fingers clear of the blades and the strip that curls out of the cutting area. Clamp the workpiece before cutting, keep cords out of the cut path, and let the tool reach full speed before feeding it into the metal. See the OSHA welding overview and our affiliate disclosure.
FAQ for welders
How do you use sheet metal shears?
Clamp the sheet, line up the blades on your marked line, and feed steadily without forcing the tool. On the two DEWALT shears, the 7/32 inch strip curls out of the cutting area as you go, which the makers say keeps the line visible. Let a powered shear reach full speed before it touches the metal.
What is the 7/32 inch strip the DEWALT shears cut?
Both the DCS491B and the DW890 remove a 7/32 inch wide strip as they cut, and the strip curls away from the cutting area instead of piling up. That is the kerf of these shears: the material the blades consume. Plan your layout so the strip comes off the waste side.
Can a drill attachment cut as thick as a dedicated shear?
Not here. The Malco TS1 states a 20 gauge capacity, while the dedicated DEWALT shears state 18 gauge. Match the stated capacity to the thickest metal you cut regularly.
Which of these has a stated warranty?
Two of them. The DCS491B states a 3 year limited warranty, and the TS1 states 1 year. The DW890 and Klein listings state no warranty term. A stated term is the only warranty that counts in our scoring.
Related: best metal shears for roof flashing, deep cut vs compact band saw, portable band saw vs angle grinder, plasma cutter vs band saw, and the metal fab tools hub.
Scoring, line by line
Each shear is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of these listings names a safety standard, so every shear here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DEWALT DCS491B 20V MAX Shear | 9.5 | 30 | 21 | 20 | 0 | 3 |
| Malco TS1 TurboShear | 9.5 | 27 | 20 | 21 | 0 | 2 |
| DEWALT DW890 Corded Shear | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Klein 1202S Aviation Snips | 9.4 | 24 | 20 | 21 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




