Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Deep Cut vs Compact Band Saw: Which One Should You Buy?

Deep cut vs compact band saw explained: portable saws go to the work, benchtop saws bring the work to the vise. Compare weights, speeds, capacities and who should buy which.

Deep Cut vs Compact Band Saw: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 13M Silver Cut-Off Wheel3M Silver Cut-Off Wheel9.7/10View on Amazon
  2. 2MAXXT Band Saw with Lightweight Aluminum BaseMAXXT Band Saw with Lightweight Aluminum Base9.7/10View on Amazon
  3. 3DEWALTDEWALTView on Amazon
  4. 4Milwaukee ElectricMilwaukee ElectricView on Amazon
  5. 5Makita LW1401 Cut-Off SawMakita LW1401 Cut-Off SawView on Amazon
  6. 6Makita 2414NB 14" Cut-Off SawMakita 2414NB 14" Cut-Off SawView on Amazon
  7. 7APLMAN 6 Inch Cut off Saw Metal Cutting Chop Saw Miter SawAPLMAN 6 Inch Cut off Saw Metal Cutting Chop Saw Miter SawView on Amazon

The deep cut vs compact band saw question is really about where you cut. A deep cut band saw is the handheld portable saw you carry to the work: the Milwaukee 2729-20 runs on 18V and weighs 15 lb as a bare tool, and the corded 6232-21 runs 11A at 21.9 lb. A compact band saw is the benchtop machine the work comes to: the KFMK tabletop lists a 5 in cutting capacity with 137 to 472 FPM, and the WEN BA4664 runs 80, 120 or 200 FPM on a stand with wheels. Buy the deep cut portable for field cuts on installed stock; buy the compact benchtop for repeatable shop cuts.

Other welders and gear to compare

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Affiliate disclosure.

Deep cut vs compact band saw: the trade

A deep cut portable band saw goes where the steel is: fence lines, installed pipe, a truck bed of angle iron. You hold the saw and guide it through the stock, which makes it fast to deploy and easy to carry at 15 lb bare for the Milwaukee 2729-20. A compact benchtop band saw stays put: the stock goes into its vise, and the saw head feeds through the cut, sometimes shutting itself off when done, as the WEN listing describes. That makes the benchtop the accurate one for repeated cuts, and the portable the practical one for everything already installed. See horizontal vs vertical metal band saw for the shop-side layouts.

What the deep cut listings offer

The deep cut side here is all Milwaukee. The 2729-20 is the 18V M18 FUEL cordless, listed at 15 lb as a bare tool and 13.6 lb in another listing, with the 2729-21 kit at 25 lb with battery. The 6232-21 is the corded deep cut at 11A and 21.9 lb with a case. Cordless buys freedom from the outlet at the cost of battery management; corded buys unlimited runtime at the cost of dragging a cord. Neither listing states a cutting capacity or blade speed, so the deep cut side’s numbers here are weight and power only. For cordless options see best cordless band saw.

What the compact listings offer

The compact side is three benchtop machines with stated specs. The KFMK tabletop lists a 5 in cutting capacity, a 10A motor and an adjustable 137 to 472 FPM blade speed range, plus a dual workbench for large and small pieces. The WEN BA4664 lists three speeds, 80, 120 and 200 FPM, a mitering vise from 0 to 45 degrees, a stand with wheels, and a 2-year warranty, at 118 lb. The MAXXT 2-in-1 lists a 5 in deep cut, a 10A motor, 0 to 45 degree cutting angles and 10/14 TPI, 14/18 TPI and 24 TPI blade options, and it can run handheld or on its table base.

Side by side

Deep cut band saw Compact band saw Takeaway
Example listings Milwaukee 2729-20 (18V); 6232-21 (11A corded) KFMK tabletop; WEN BA4664; MAXXT 2-in-1 Portable vs benchtop
Weight 15 lb bare (2729-20); 21.9 lb (6232-21) 118 lb with stand (WEN) Light to carry vs heavy to place
Power 18V battery or 11A corded 10A (KFMK, MAXXT); 4.6 amp motor (WEN) Battery or cord vs corded bench power
Blade speed Not stated 137 to 472 FPM (KFMK); 80, 120, 200 FPM (WEN) Not stated vs listed range
Cutting capacity Not stated 5 in (KFMK, MAXXT) Not stated vs listed capacity
Miter angles Not stated 0 to 45 degrees (WEN, MAXXT) Not stated vs listed angles
Warranty stated Not stated 2-year (WEN) Not stated vs listed term

Figures are from the listings reviewed; a figure from one listing describes that listing only. Where a listing states no figure, the table says so rather than guessing.

Who should buy which

Buy the deep cut portable if your cuts happen away from the bench: installed pipe, structural steel in place, demo and repair work. The 15 lb bare Milwaukee goes in a tool bag; the 25 lb kit goes in the truck. Buy the compact benchtop if your cuts happen at the bench: repeated chop cuts, mitered angles from 0 to 45 degrees, and unattended cutting with the WEN’s auto shut-off. A small fab shop doing both eventually owns both, but buy the one that matches where your steel actually sits. For the neighboring cutting choice see portable band saw vs angle grinder.

One more practical note: the MAXXT listing includes 10/14 TPI, 14/18 TPI and 24 TPI blades.

FAQ for welders

Can a portable band saw cut the same stock as a benchtop?

Roughly, for one-off cuts. The portable goes to the work and the benchtop brings the work to the vise, but a benchtop with a mitering vise cuts repeatable angles from 0 to 45 degrees that are hard to match freehand. For production-style repeated cuts, the benchtop wins.

What blade speed do I need for steel?

The listings state speeds without naming a steel setting: the WEN lists 80, 120 and 200 FPM and the KFMK lists 137 to 472 FPM. The MAXXT ships 10/14 TPI, 14/18 TPI and 24 TPI blades.

Is a 5 in capacity enough for a home shop?

Both the KFMK and the MAXXT list a 5 in cutting capacity. The deep cut Milwaukee listings state no cutting capacity, so the listings leave a direct capacity comparison unclear. Compare the stated 5 in figure with the stock sizes you cut most before choosing.

Corded or cordless portable band saw?

Cordless for field work: the Milwaukee 2729-20 runs 18V at 15 lb bare. Corded for the shop: the 6232-21 runs 11A with unlimited runtime. If you already own M18 batteries, the bare tool is the economical entry.

Do benchtop band saws need a stand?

They need a stable home. The WEN includes a stand with wheels, the KFMK is a tabletop unit, and the MAXXT converts between handheld and table base. A wobbling saw cuts crooked, so bolt it down or use the stand.

More welding guides

See the plasma cutter vs band saw comparison, the portable band saw vs cold cut saw guide, the metal cold saw vs horizontal band saw comparison and how to use a vertical band saw.

More buying guides