Best Cordless Band Saw (2026): 4 Portable Saws Scored
Four cordless portable band saws for metal fabrication, compared on cutting capacity, blade speed, motor type, tool weight, and stated warranty terms.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDEWALT DCS374P29.6/10View on Amazon - 2
High Speed CapacityMakita XBP02Z9.5/10View on Amazon - 3
Most Compact BrushlessDEWALT DCS378B9.5/10View on Amazon - 4
Light Duty Multi-SpeedONEMANA bw21109.3/10View on Amazon
When you are prepping square tubing, angle iron, or round bar for a tight fit-up on the welding bench, an angle grinder cut-off wheel throws sparks and leaves a heavy burr that slows down your joint prep. A cold-cutting portable metal band saw delivers square, clean cuts with minimal cleanup before you tack your workpiece. Choosing the best cordless band saw comes down to matching your metal stock sizes against throat depth, motor torque, blade speed controls, and tool weight. This guide evaluates four battery-powered band saws from 2.5 to 5 inches of cutting capacity based on what each manufacturer listing publishes.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall DEWALT DCS374P2: A stated 5-inch cutting capacity, brushless motor, complete kit with two 5.0Ah batteries and charger, and a 3-year warranty. Check price on Amazon
- High Speed Capacity Makita XBP02Z: A 4-3/4 inch cut capacity, variable speed dial up to 530 ft/min, over-torque alert light, and a 3-year limited warranty. Check price on Amazon
- Most Compact Brushless DEWALT DCS378B: A 10.8-pound bare tool with a 535 MWO brushless motor, 570 SFPM blade speed, and 3-3/8 inch cut capacity. Check price on Amazon
- Light Duty Multi-Speed ONEMANA bw2110: A 2.5-inch cut capacity bare tool with 6-speed dial, brushless motor, and compatibility with Makita battery packs. Check price on Amazon
The machines

DEWALT DCS374P2 20V Max Deep Cut Band Saw Kit
A 20V deep cut band saw kit with a 5-inch cutting capacity, brushless motor, two 5.0Ah batteries, and a 3-year warranty.
Pros
- Stated 5-inch cutting capacity handles up to 4-inch SCH 40 pipe and double strut
- DEWALT-built brushless motor with variable speed control
- Kit includes two 5.0Ah batteries, charger, kit box, and an 18 TPI blade
- 3 year limited manufacturers warranty stated in the listing
Cons
- 25-pound kit weight is the heaviest portable kit in this roundup
- No surface feet per minute blade speed rating is stated in the listing

Makita XBP02Z 18V LXT Lithium-Ion Cordless
An 18V cordless portable band saw with a 4-3/4 inch cut capacity, variable speed dial to 530 ft/min, and an over-torque protection alert light.
Pros
- Stated 4-3/4 inch cutting capacity accepts standard 44-7/8 inch blades
- Variable speed dial provides 275 to 530 ft/min blade speed with electric brake
- Protection circuit with built-in alert light warns against motor over-torque
- 3-year limited warranty stated in the listing
Cons
- Bare tool only, battery and charger sold separately
- 15-pound bare tool weight is heavy for overhead cutting
- Uses a standard motor rather than a brushless design

DEWALT 20V MAX XR Bandsaw, Brushless Motor
A 20V MAX XR brushless portable band saw with a 3-3/8 inch cutting capacity, 570 SFPM blade speed, and a compact 10.8-pound bare tool weight.
Pros
- Brushless motor delivers 535 MWO and a fast 570 SFPM blade speed
- Dual blade speed control with both variable speed trigger and adjustment dial
- Integrated blade guard and built-in LED work light for accurate cutting
- Lightweight 10.8-pound design with lanyard-ready attachment point
Cons
- No concrete warranty term stated in the listing
- Bare tool only, battery, charger, and blades must be purchased separately

Cordless Bandsaw, 20V Brushless Portable Bandsaw
A 20V brushless cordless band saw with a 2.5-inch cutting capacity, 6-speed dial, and compatibility with Makita battery packs.
Pros
- Brushless motor with 6-speed adjustment control dial
- Compatible with Makita platform battery packs
- Listing claims sparkless cutting with no burrs on steel, aluminum and conduit
- States exact blade dimensions: 835 x 13 x 0.5 mm (32-7/8 x 1/2 x .020 inches)
Cons
- No concrete warranty term stated in the listing
- 2.5-inch cutting capacity is the smallest in this roundup
- Stated wattage of 60 watts is the lowest power figure stated in this roundup
- Bare tool only, battery and charger not included
Other welders and gear to compare
MAXXT 2-in-1 Band Saw with Table Saw BaseCheck price on Amazon
WEN 9-Inch Band SawCheck price on Amazon
WEN Portable Band Saw for MetalCheck price on Amazon
MILWAUKEE'S Band Saw Brand: MilwaukeeCheck price on Amazon
DEWALT 20V MAX XR Compact Reciprocating SawCheck price on Amazon
DEWALT Portable Band SawCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Cut capacity | Motor type | Blade speed | Weight | Power supply | Warranty |
|---|---|---|---|---|---|---|---|
| DEWALT DCS374P2 | 9.6/10 | 5 in | Brushless | Variable speed | 25 lb (kit) | 20V (2x 5.0Ah included) | 3 years |
| Makita XBP02Z | 9.5/10 | 4-3/4 in | Standard (Makita-built) | 275-530 ft/min | 15 lb | 18V LXT (bare tool) | 3 years |
| DEWALT DCS378B | 9.5/10 | 3-3/8 in | Brushless (535 MWO) | 570 SFPM | 10.8 lb | 20V MAX XR (bare tool) | None stated |
| ONEMANA bw2110 | 9.3/10 | 2.5 in | Brushless (60W) | 6 speeds, 320 rpm | 5 kg | 20V (Makita compatible) | None stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 13 October 2026.
Buying guide: choosing the best cordless band saw
Cutting capacity and throat clearance
Throat depth determines the maximum stock dimension you can sever in a single pass. The DEWALT DCS374P2 provides a 5-inch cutting capacity, which the listing states cuts up to 4-inch SCH 40 pipe and double unistrut. Makita’s XBP02Z delivers a 4-3/4 inch cut capacity, while the DEWALT DCS378B offers 3-3/8 inches. The ONEMANA bw2110 provides a 2.5-inch cutting capacity. For structural fabricators cutting thick round pipe and heavy tube, deep-cut capacity avoids rotating the stock to finish a cut. For conduit, unistrut, and small frame tubing, a smaller throat depth is easier to manage.
Brushless motors vs standard motors
Three models here feature brushless motors: the DEWALT DCS374P2, the DEWALT DCS378B, and the ONEMANA bw2110. Brushless motors adjust power output to load demand, run cooler during continuous cutting, and extend battery runtime per charge. Makita’s XBP02Z uses a Makita-built motor with carbon brushes and includes an over-torque protection circuit with an alert light to warn against motor overload during heavy cuts.
Blade speed and variable control
Matching blade speed to material hardness prolongs blade life and prevents stripped teeth. Makita’s XBP02Z features a variable speed control dial delivering 275 to 530 ft/min, and DEWALT’s DCS378B provides a 535 MWO brushless motor running at 570 SFPM with both a variable speed trigger and adjustment dial. The ONEMANA bw2110 lists a 6-speed control dial with 320 rpm speed. Slower speeds keep hard alloys and stainless steel cool, while faster blade travel clears chips efficiently through softer structural metals.
Tool weight and portability
Tool weight affects fatigue during repetitive cuts and out-of-position work. The DEWALT DCS378B bare tool weighs 10.8 pounds, and the ONEMANA bw2110 lists an item weight of 5 kg. Makita’s XBP02Z bare tool weighs 15 pounds. The DEWALT DCS374P2 deep cut kit weighs 25 pounds in its storage case with charger and batteries. Lighter saws excel when working overhead or on ladders, while heavier saws provide stable downward inertia when cutting on the fabrication bench.
Kit packages vs bare tools
Only the DEWALT DCS374P2 comes as a complete kit, including the band saw, two DCB205 5.0Ah batteries, a charger, a hard kit box, and one 18 TPI band saw blade. The other three saws are bare tools. The Makita XBP02Z requires an 18V LXT battery and includes one 44-7/8 inch 18 TPI blade. The DEWALT DCS378B requires a 20V MAX battery and includes no blades. The ONEMANA bw2110 requires a 20V pack and lists compatibility with Makita-platform batteries, with blade dimensions stated as 835 x 13 x 0.5 mm (32-7/8 x 1/2 x .020 inches).
Use as directed. Always secure your stock firmly in a heavy vise or clamp before cutting so work cannot twist or bind the band saw blade. Wear eye protection and leather gloves when handling cut metal and clearing burrs. Disconnect or remove battery packs before changing blades or adjusting blade guides, and never force the saw down through the cut. See our Safety Disclaimer.
Before You Strike an Arc
Before you clamp your stock and fire up a cordless band saw for joint fit-up, run through these shop checks:
- Battery platform and voltage: Verify your battery match before starting work. The DEWALT models require 20V MAX packs, the Makita saw requires an 18V LXT lithium-ion battery, and the ONEMANA listing states compatibility with Makita battery packs. Fully charge batteries to avoid stalling mid-cut on heavy wall tube.
- Blade size and loop length: Install the correct blade loop size for your tool frame. The Makita listing specifies 44-7/8 inch blades (and includes an 18 TPI blade), the ONEMANA specifies 835 x 13 x 0.5 mm (32-7/8 x 1/2 x .020 inch) blades, and the DEWALT deep-cut kit includes an 18 TPI blade. Match tooth count to wall thickness so teeth cut smoothly without snagging.
- Tension lever and guide rollers: Inspect blade seating along the rubber drive wheels and guide bearings. Use the blade tension lever to set tension firmly before powering on so the blade does not track off the wheels or bind in the cut.
- Stock clamping and support: Never hand-hold loose tubing, pipe, or unistrut while cutting. Clamp the workpiece securely in a fabrication vise or clamp so the cut line stays square and the drop piece cannot pinch the blade.
FAQ for welders
How does a portable band saw work?
A portable band saw uses a continuous looped toothed steel blade wrapped around motor-driven pulleys. A battery-powered motor spins the drive wheel, drawing the band through guide bearings at a controlled blade speed. Because the narrow blade moves in a continuous loop, it cuts through tubing, pipe, and bar stock with low heat, minimal kerf loss, and minimal sparks.
How do you use a portable band saw for straight cuts?
Clamp your metal workpiece securely in a vise so it cannot vibrate or twist during the cut. Rest the saw guide shoe flat and firm against the stock before squeezing the power trigger to bring the blade up to full cutting speed. Let the weight of the saw pull the blade through the metal rather than pushing down, keeping the blade perpendicular to your cut line until the drop piece falls clear.
Are portable band saws worth it for metal fabrication?
A cordless portable band saw saves significant prep time in a metal fabrication shop compared to an abrasive chop saw or angle grinder. It produces clean, square edges that require little deburring before joint fit-up and tack welding. The sparkless cutting action also reduces fire hazards around the shop floor and makes working around flammable materials much safer.
Can a cordless portable band saw cut structural steel pipe?
Yes, provided the pipe diameter fits within the saw throat clearance. The DEWALT DCS374P2 listing states a 5-inch cutting capacity that cuts up to 4-inch SCH 40 pipe and double unistrut. Smaller saws with 2.5-inch to 3-3/8 inch throat depths handle conduit, square tubing, and angle iron within their stated limits.
What blade speed should you use when cutting metal?
Variable speed controls allow matching blade travel to the hardness of your metal stock. Slower blade speeds help prevent overheating and premature tooth wear when slicing through hard steels and stainless alloys. Faster speeds clear chips quickly on softer metals like aluminum, copper, and thin conduit.
Related: best portable band saw for metal, cold saw vs band saw, best horizontal band saw, and the metal fab tools hub. Also see our horizontal band saw for aluminum. Also see our best cold cut saw. Also see our best chop saw for metal cutting. Also see our best angle grinder for cutting metal. Also see our best tubing notcher. Also see our best drill press for metalworking. Also see our best die grinder.
Scoring, line by line
Each saw is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of the listings in this sample state a formal electrical safety listing such as UL, CSA, or ETL, so every model scores zero on that criterion; the ranking reflects cutting capacity, motor design, speed controls, kit inclusions, and stated warranty terms.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DEWALT DCS374P2 | 9.6 | 32 | 22 | 21 | 0 | 3 |
| Makita XBP02Z | 9.5 | 29 | 21 | 21 | 0 | 3 |
| DEWALT DCS378B | 9.5 | 30 | 21 | 20 | 0 | 0 |
| ONEMANA bw2110 | 9.3 | 24 | 19 | 20 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




