Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Metal Shears for Beginners (2026): 3 Picks Scored

Three metal shears for beginners compared by stated blade material, cutting capacity, size and warranty, from scissor shears to a bench shear.

Best Metal Shears for Beginners (2026): 3 Picks Scored
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Fiskars PowerArc 10 inShop ShearFiskars PowerArc 10 in9.7/10View on Amazon
  2. 2VEVOR HS-6Bench ShearVEVOR HS-69.7/10View on Amazon
  3. 3GARTOL HC120Compact ShearGARTOL HC1209.6/10View on Amazon

The patch panel is cut, the bracket needs trimming, and the angle grinder throws sparks across the bench. The best metal shears for beginners are the ones that cut the stock you actually buy without a learning curve: scissor-style shears for light sheet, a bench shear for thicker plate. We compared three on stated blade material, cutting capacity, size, weight and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our Affiliate disclosure.

Quick picks

  • Shop Shear Fiskars PowerArc 10 in: Stainless serrated blades, SoftGrip loops, limited lifetime warranty Check price on Amazon
  • Bench Shear VEVOR HS-6: 0.24 in plate capacity, HRC52-54 blades, 25.1 lb frame Check price on Amazon
  • Compact Shear GARTOL HC120: 8 in, 4.48 oz, 1/5 in wire notch, thumb safety lock Check price on Amazon

The machines

Fiskars Pro PowerArc Shop Shears

Fiskars Pro PowerArc Shop Shears

Fiskars9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 in stainless shop shear with serrated PowerArc blades, SoftGrip loops and a limited lifetime warranty.

Pros

  • Stainless steel serrated blades with PowerArc geometry, the only stated cutting-force design here
  • Limited lifetime warranty stated in the bullets
  • Oversized SoftGrip loops with texturing suit gloved hands, per the listing
  • 8 oz weight with a low-friction coating that the listing says resists rust

Cons

  • No cutting capacity in inches or gauge is stated anywhere in the listing
  • 10.13 in overall length is longer than the 8 in GARTOL, less handy in a crowded toolbox
  • 30% more cutting power is the maker's claim, not a measured figure
VEVOR Sheet Metal Shear, 6 in Manual Hand Plate

VEVOR Sheet Metal Shear, 6 in Manual Hand Plate

VEVOR9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A mounting-type 6 in bench shear with stated capacities of 0.24 in plate and 0.43 in round steel on a 25.1 lb frame.

Pros

  • The only listing here with stated capacities: 5.12 in cutting length, 0.24 in thickness, 0.43 in round steel
  • T10 steel blades heat-treated to HRC52-54 with a stated blade gap under 0.07 mm
  • Q235 steel frame at 25.1 lb gives the sturdiest stated build here
  • Extended handle with lever-arm design for lower cutting effort, per the listing

Cons

  • No warranty term is stated
  • 25.1 lb and a mounting type mean it needs a bench and bolts, not a toolbox slot
  • Blade edge is listed as round, which suits shearing but not piercing cuts
  • The most machine-like pick here, which is more setup than a first-timer may want
GARTOL 8" Heavy Duty Scissors & Tin Snips

GARTOL 8" Heavy Duty Scissors & Tin Snips

GARTOL9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8 in utility shear with serrated blades, a wire cutter notch to 1/5 in and a thumb-operated safety lock.

Pros

  • Built-in cable notch handles wire up to 1/5 in diameter, a stated extra none of the others list
  • Thumb-operated safety lock keeps the blades closed in the toolbox
  • 4.48 oz is the lightest pick here, easy to carry to the job
  • Soft-grip non-slip handles with ambidextrous orientation, per the listing

Cons

  • No warranty term is stated
  • 2.36 in blade is the shortest here, so long cuts take more strokes
  • Marketed at many materials at once, which reads broad rather than deep on metal

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Length Blade Capacity Warranty
Fiskars PowerArc 10 in 9.7/10 10.13 in 3.75 in, serrated Not stated Limited lifetime
VEVOR HS-6 9.7/10 14.17 in 6.1 in blade length 0.24 in plate, 0.43 in round Not stated
GARTOL HC120 9.6/10 8 in 2.36 in, serrated 1/5 in wire notch Not stated

Ratings in this table are the makers’ own claims taken from each product page (19 October 2026).

Buying guide: the best metal shears for beginners

Scissor shears against bench shears

Two picks here are scissor-style: the Fiskars and GARTOL. They cut by hand, travel in a toolbox and suit light sheet and trim work. The VEVOR is a mounting-type bench shear at 25.1 lb: it bolts down, and the extended handle and lever arm do the work on 0.24 in plate and 0.43 in round steel. A beginner cutting patch panels and brackets starts with scissor shears; a beginner cutting plate starts at the bench. For the wider field, see our best sheet metal shears roundup.

Blade material and edge

The Fiskars listing states stainless steel blades. The GARTOL bullets state high-carbon stainless steel blades, while its spec table states alloy steel. The VEVOR bullets state T10 steel blades at HRC52-54, while its spec table states alloy steel. The Fiskars and GARTOL state serrated edges that grip the work so it does not walk; the GARTOL spec table says straight edge against its own bullets, so read the bullets. The VEVOR states a blade gap under 0.07 mm for clean, low-burr cuts. Serration helps on thin sheet; a tight gap matters on thicker stock.

Stated cutting capacity

Only one listing states a real sheet capacity. The VEVOR states 5.12 in cutting length, 0.24 in (6 mm) thickness and 0.43 in (11 mm) round steel diameter. The GARTOL states a 1/5 in wire notch, which is a wire capacity, not a sheet capacity. The Fiskars states no capacity at all. When a listing will not say what it cuts, assume light work only. Our metal shear vs metal nibbler comparison covers the next step up in cutting power.

Weight and size on the bench

Stated weights run from 4.48 oz (GARTOL) to 8 oz (Fiskars) to 25.1 lb (VEVOR). Lengths run from 8 in (GARTOL) to 10.13 in (Fiskars) to 14.17 in (VEVOR). Light shears live in the toolbox and ride to the job; the bench shear lives on the bench and needs mounting. Match the tool to where the cutting happens, not just what gets cut.

Before You Strike an Arc

  • Check the blades on arrival: the VEVOR states a blade gap under 0.07 mm, so look for even contact along the edge before mounting.
  • Lock check: the GARTOL states a thumb-operated safety lock; confirm it holds the blades closed before it goes in the toolbox.
  • Glove fit: the Fiskars states oversized SoftGrip loops for gloved hands; try the grip with the gloves you weld in.
  • Mounting plan: the VEVOR is a mounting-type shear at 25.1 lb, so have bolts and a solid bench ready.
  • Capacity check: only the VEVOR states a sheet cutting capacity, so confirm the stock thickness against its numbers before the first cut.

FAQ for welders

What is the difference between tin snips and a bench shear?

Scissor-style shears like the Fiskars and GARTOL cut by hand and suit light sheet and trim work. A bench shear like the VEVOR bolts down and uses a long handle for leverage on thicker stock, with stated capacities of 0.24 in plate and 0.43 in round steel.

What thickness can these shears cut?

The VEVOR states 0.24 in (6 mm) plate and 0.43 in (11 mm) round steel; the GARTOL states a 1/5 in wire notch. The Fiskars states no capacity, so assume light work.

Which of these state a warranty?

The Fiskars states a limited lifetime warranty in the bullets. The GARTOL and VEVOR state no warranty term.

Are these shears left-hand friendly?

The Fiskars and GARTOL state ambidextrous orientation. The VEVOR is a bench shear with an extended handle rather than handed loops.

Does the VEVOR need to be mounted?

The listing describes it as a mounting-type shear at 25.1 lb with a solid steel frame, so plan on bolting it to a bench. It is not a handheld tool.

Related: our best sheet metal shears roundup and metal shear vs metal nibbler. Also see every metal fab tool guide and metal shears for roof flashing.

Scoring, line by line

The Gear Score weighs performance, build, value, safety and warranty. For shears, safety means a stated safety standard or certified feature, and none of these three listings states one, so safety scores zero across the board. The Fiskars states a warranty term, a limited lifetime warranty. How we pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Fiskars PowerArc 10 in 9.7 30 21 20 n/a 4
VEVOR HS-6 9.7 32 22 20 n/a 0
GARTOL HC120 9.6 28 20 21 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides

Metal Fab Tools ·

Best Metal Shears for Roof Flashing (2026)

Five metal shears for roof flashing compared on cut capacity, shear type and warranty: cordless shears, drill attachments and a roofer's bent hand shear.