Best Sheet Metal Shears for Aluminum (2026): 5 Picks Scored
Five sheet metal shears for cutting aluminum compared: corded, cordless, drill-driven, manual and benchtop picks, scored on cut capacity, build, value and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Top PickVLOXO Drill Attachment Shear9.4/10View on Amazon - 2
Corded PickSHALL Electric Metal Shear9.4/10View on Amazon - 3
Bench PickVEVOR Guillotine Shear 20 in9.4/10View on Amazon - 4
Manual PickVEVOR Hand Plate Shear 8 in9.4/10View on Amazon - 5
Cordless PickPropeLannt Cordless Shears9.4/10View on Amazon
The aluminum patch is cut to size, the trim ring needs one clean curve, and the old snips are leaving a chewed edge. The best sheet metal shears for aluminum are the ones whose stated capacity covers your stock and whose head can follow your cut: this guide compares five, corded, cordless, drill-driven, manual and benchtop, on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Top Pick VLOXO Drill Attachment Shear: Drill-driven shear cutting up to 3 mm, chrome vanadium head, and the only stated warranty, 1 year. Check price on Amazon
- Corded Pick SHALL Electric Metal Shear: 4.0 A corded shear for 14 GA steel and 16 GA stainless, variable 0 to 2500 SPM, 360 degree head. Check price on Amazon
- Bench Pick VEVOR Guillotine Shear 20 in: 20 in benchtop guillotine, 19.69 in cut length, T10 blades on a Q235 steel frame. Check price on Amazon
- Manual Pick VEVOR Hand Plate Shear 8 in: 8 in hand plate shear for 1/4 in steel, T10 blades in a solid steel frame. Check price on Amazon
- Cordless Pick PropeLannt Cordless Shears: Bare tool for Dewalt 20V Max batteries, 14 GA steel, 360 degree pivoting head, LED light. Check price on Amazon
The machines

VlOXO Metal Shears Drill Attachment Sheet Metal
A drill attachment that turns any electric drill into sheet metal shears, with a chrome vanadium steel cutter head, cutting thickness up to 3 mm, a handle that rotates left and right, and a 7-inch wrench included. The listing states a 1 year warranty.
Pros
- Cutting thickness up to 3 mm stated
- Chrome vanadium steel cutter head
- Rotating handle for a comfortable grip angle
- 1 year warranty stated, the only one here
Cons
- Needs an electric drill, not included
- No safety listing stated
- Cut capacity stated only as 3 mm, no gauge figure
- No blade replacement details stated

SHALL Electric Metal Cutting Shear
A 4.0 amp corded electric shear with variable speed from 0 to 2500 SPM, a 360 degree swivel head, and a lock-on button for continuous cutting. The listing states cutting up to 14 gauge sheet metal and 16 gauge stainless steel, with a 6-1/2 ft power cable.
Pros
- Cuts 14 GA sheet metal and 16 GA stainless steel stated
- Variable speed 0 to 2500 SPM by trigger pressure
- 360 degree swivel head for curves and angles
- Lock-on button for continuous cutting
Cons
- No warranty term stated
- No safety listing stated
- Corded, with a 6-1/2 ft power cable
- Double-cut design leaves a 1/4 in curled strip to manage

VEVOR Guillotine Shear, 20 in Bed Width Benchtop
A 20 inch benchtop guillotine shear for metal sheet processing, with T10 steel blades heat-treated to HRC52-54, a Q235 steel frame, and a stand with support legs. The listing states a max cutting length of 19.69 inches and thickness of 0.06 inch / 1.5 mm, for aluminum, steel, copper, plastic and PCB boards.
Pros
- 19.69 in max cutting length stated
- T10 blades heat-treated to HRC52-54
- Q235 steel frame with stand and support legs included
- Extended handle for low-effort cutting
Cons
- No warranty term stated
- No safety listing stated
- 72.8 lb; needs a dedicated bench spot
- Max thickness only 0.06 in / 1.5 mm

VEVOR Hand Plate Shear 8"
An 8 inch manual hand plate shear with a long lever arm and compensating spring, rated to cut 1/4 inch sheet steel. The listing states T10 high carbon steel blades in a solid steel frame, bench mounting, and a 38 pound weight.
Pros
- Cuts 1/4 in sheet steel stated
- Long lever arm with compensating spring for leverage
- T10 high carbon steel blades, solid steel frame
- Bench mounts for stable cutting
Cons
- No warranty term stated
- No safety listing stated
- Manual; cutting speed depends on the operator
- 38 lb; needs a solid bench

Cordless Metal Shears Compatible with Dewalt 20V
A cordless metal shear that runs on Dewalt 20V Max and 60V Flex batteries, sold as a bare tool with no battery included. The listing states 14 gauge steel cutting, a 360 degree pivoting head, a brushless motor and an LED light.
Pros
- Cordless, for Dewalt 20V Max and 60V Flex batteries
- 14 GA steel cutting stated
- 360 degree pivoting head
- Brushless motor with LED light
Cons
- Battery not included; bare tool only
- No warranty term stated
- No safety listing stated
- No stated SPM or stroke figure
Other welders and gear to compare
Sheet Metal Cutter for DrillCheck price on Amazon
VEVOR Sheet Metal BrakeCheck price on Amazon
WEN Metal ShearCheck price on Amazon
KAKA INDUSTRIAL Metal BrakeCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Cut capacity | Power | Weight | Warranty |
|---|---|---|---|---|---|
| VLOXO Drill Attachment Shear | 9.4/10 | Up to 3 mm | Drill powered | 1.59 lb | 1 year |
| SHALL Electric Metal Shear | 9.4/10 | 14 GA steel, 16 GA stainless | 4.0 A corded | 5.26 lb | None stated |
| VEVOR Guillotine Shear 20 in | 9.4/10 | 0.06 in / 1.5 mm, 19.69 in long | Manual | 72.8 lb | None stated |
| VEVOR Hand Plate Shear 8 in | 9.4/10 | 1/4 in steel | Manual | 38 lb | None stated |
| PropeLannt Cordless Shears | 9.4/10 | 14 GA steel | Dewalt 20V Max, battery not included | 1.52 kg | None stated |
All specs here repeat what the maker rates and the listing prints, copied down 19 October 2026.
Buying guide: best sheet metal shears for aluminum
Cut capacity, stated three ways
These listings do not share one unit. The SHALL and PropeLannt state 14 gauge steel, the VEVOR hand shear states 1/4 inch steel, the VLOXO states up to 3 mm, and the guillotine states 0.06 inch / 1.5 mm. Only the PropeLannt, VLOXO and guillotine listings name aluminum outright; the others state steel capacity, so match the stated figure to your stock before cutting aluminum.
Power source and where you cut
The SHALL is corded 4.0 amp AC with a 6-1/2 ft cable, the PropeLannt is cordless on Dewalt 20V Max and 60V Flex batteries, and the VLOXO needs an electric drill to drive it. The VEVOR hand shear and guillotine are manual and need no power at all. Pick the power source that matches where the work happens: bench, driveway or field.
Head movement for curves
Three listings state a rotating head: the SHALL swivels 360 degrees after loosening three hex bolts, the PropeLannt pivots 360 degrees, and the VLOXO handle rotates left and right on a bearing. The manual shears cut straight. If your aluminum work has curves or circles, a rotating head matters more than raw capacity.
Weight and bench mounting
Weights run from 1.59 lb for the VLOXO attachment to 72.8 lb for the guillotine. The VEVOR hand shear and the guillotine both describe bench mounting, which steadies long cuts. A heavy shear stays put; a light one travels.
Use as directed. Fresh sheet edges are sharp: wear gloves and eye protection, clamp the work before cutting, and keep the offcut side clear. Lock the head angle before a cut, keep cords and the drill clear of the blade path, and never exceed the stated cut capacity. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Confirm the stated cut capacity covers your aluminum stock before the first cut; the listings state capacity in gauge, inches or millimeters, not interchangeably.
- The PropeLannt is a bare tool: a compatible Dewalt 20V Max or 60V Flex battery is required and not included.
- The VLOXO needs an electric drill to drive it; the listing says it fits any electric drill, so check the fit before the job.
- Bench-mount the VEVOR hand shear or the guillotine before cutting long stock; both listings describe bench mounting.
- Only the VLOXO states a warranty term, 1 year; check the other listings before buying.
FAQ for welders
What gauge aluminum can these shears cut?
Match the stated capacity to your stock. The PropeLannt states 14 gauge steel, the VLOXO states up to 3 mm, and the guillotine states 0.06 inch / 1.5 mm; all three name aluminum outright. The SHALL states 14 gauge sheet metal and 16 gauge stainless, and the VEVOR hand shear states 1/4 inch steel, so check those listings before cutting aluminum.
Do the cordless shears come with a battery?
No. The PropeLannt is a bare tool and the listing states the battery is not included; it runs on Dewalt 20V Max and 60V Flex batteries, which you supply.
Can a drill attachment really cut curves?
The VLOXO listing says it can perform curved and straight cutting, with a handle that rotates left and right through a bearing so you can set the grip angle. Curves still depend on a steady hand on the drill.
Is the benchtop guillotine hard to set up?
The listing includes a stand, two support legs, screws, nuts, washers and a user manual, with an extended handle designed for low-effort cutting. At 72.8 lb it needs a solid bench, but there is no power or assembly beyond the stand.
Why do the listings mix gauge, inches and millimeters?
Each maker states capacity its own way, and the listings do not convert between units. Compare within one unit where you can, and treat a missing unit as not stated rather than guessing the conversion.
Related: best angle grinder for cutting metal, best angle grinder for welding prep, best angle grinder for beveling steel, best angle grinder for trailer building, best angle grinder with speed control, best angle grinder for beginners, and the welding tables and carts hub.
Scoring, line by line
Each shear is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. No listing here states an electrical safety listing, so every shear scores zero on safety; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VLOXO Drill Attachment Shear | 9.4 | 26 | 19 | 21 | 0 | 3 |
| SHALL Electric Metal Shear | 9.4 | 30 | 21 | 21 | 0 | 0 |
| VEVOR Guillotine Shear 20 in | 9.4 | 29 | 22 | 20 | 0 | 0 |
| VEVOR Hand Plate Shear 8 in | 9.4 | 28 | 21 | 20 | 0 | 0 |
| PropeLannt Cordless Shears | 9.4 | 27 | 20 | 19 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.




