Best Magnetic Drill Press (2026): 3 Picks for Metal Surfaces
Three magnetic drill presses for metal surfaces, compared on mag force, boring diameter, speed, power and weight.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallZELCAN Mag Drill9.5/10View on Amazon - 2
Best Speed RangeVEVOR 8850E9.5/10View on Amazon - 3
Most VersatileVEVOR MD-50E9.4/10View on Amazon
A magnetic drill press lets you bore a clean hole in a steel plate, beam or pipe without dragging the work to a floor drill press. The magnet clamps the drill to the metal, the motor turns the cutter, and you get a hole where the work sits. This guide compares three magnetic drill presses on mag force, boring diameter, speed, power and weight, and names the best magnetic drill press for shop and site work.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall ZELCAN Mag Drill: 1550 watts, 3125 lbf of mag force, 6 drill bits and a 16.9 fl. oz. coolant tank. Check price on Amazon
- Best Speed Range VEVOR 8850E: 1400 watts, 10 speeds from 0 to 800 rpm, a 2 inch boring diameter and a Weldon shank. Check price on Amazon
- Most Versatile VEVOR MD-50E: Annular drilling, twist drilling and tapping in one tool, with a 10-level speed dial and an 8.66 inch stroke. Check price on Amazon
The machines
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | ZELCAN Magnetic Drill Press with 6 Drill Bits | 9.5/10 | Buy on Amazon |
| 2 | VEVOR Magnetic Drill Press, 1400 W | 9.5/10 | Buy on Amazon |
| 3 | VEVOR Magnetic Drill Press, 1400 W | 9.4/10 | Buy on Amazon |

ZELCAN Magnetic Drill Press with 6 Drill Bits
A 1550 watt mag drill with 3125 lbf of holding force, stepless speed and reversible direction, plus 6 drill bits and a coolant tank.
Pros
- Highest power here at 1550 watts
- Strongest magnet at 3125 lbf
- 6 drill bits included
- Coolant tank holds 16.9 fl. oz.
Cons
- 650 rpm top speed, below 800 rpm
- No warranty term is stated

VEVOR Magnetic Drill Press, 1400 W
A 1400 watt mag drill with 10 speeds from 0 to 800 rpm, a Weldon shank, depth scales and an overload shut-off.
Pros
- 10 speeds from 0 to 800 rpm
- Weldon shank included
- Depth scales for consistent drilling
- Overload shut-off stated
Cons
- No drill bits are listed as included
- No coolant tank is stated
- Twist drilling tops out at 0.6 inch
- No warranty term is stated

VEVOR Magnetic Drill Press, 1400 W
A 1400 watt mag drill that combines annular drilling, twist drilling and tapping, with a 10-level speed dial and an 8.66 inch stroke.
Pros
- Annular, twist and tapping in one tool
- 10-level speed dial, reversible
- 8.66 inch stroke with a clear scale
- 15A overload fuse stated
Cons
- Magnet is 1000 N, far below the others
- No drill bits are listed as included
- Plastic in the listed materials
- No warranty term is stated
Other welders and gear to compare
VEVOR Magnetic Drill PressCheck price on Amazon
VEVOR Mag Drill PressCheck price on Amazon
VEVOR Low Profile Magnetic Drill PressCheck price on Amazon
DEWALT Drill PressCheck price on Amazon
VEVOR 1550W Mag Drill PressCheck price on Amazon
VEVOR 1450W Mag Drill PressCheck price on Amazon
ZELCAN Mag Drill Press with 6 Drill BitsCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Mag force | Boring diameter | Speed | Power | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| ZELCAN Mag Drill | 9.5/10 | 3125 lbf | 2 in | 650 rpm | 1550 W | 20.8 kg | Not stated |
| VEVOR 8850E | 9.5/10 | 2810 lbf | 2 in | 0-800 rpm | 1400 W | 25.1 pounds | Not stated |
| VEVOR MD-50E | 9.4/10 | 1000 N | 2 in | 0-750 rpm | 1400 W | 28 pounds | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 13 October 2026.
Buying guide: choosing the best magnetic drill press
Mag force and holding power
Mag force is the number that decides whether the drill stays put. The ZELCAN states 3125 lbf, the VEVOR 8850E states 2810 lbf, and the VEVOR MD-50E states 1000 N, far below the other two. The 8850E stays in place on vertical or sloped metal surfaces, and the MD-50E adds a no-shake strap for curved pipes from 3.15 to 11.81 inches. A weak magnet means a wandering cutter, so treat mag force as the first filter.
Boring diameter and speed
All three drills bore to 2 inches, so speed and control separate them. The 8850E runs 0 to 800 rpm across 10 speeds, the MD-50E runs 0 to 750 rpm on a 10-level dial, and the ZELCAN runs at 650 rpm with a stepless knob. The 8850E also twists from 0.1 to 0.6 inch for small holes, and the MD-50E and the ZELCAN reverse direction. Pick the speed range that matches the metal and the cutter you run.
Power and weight
The ZELCAN leads on power at 1550 watts, against 1400 watts for both VEVOR drills. Amps run 14 A on the ZELCAN, 8.7 A on the 8850E and 15 A on the MD-50E, all on 110 volts. Weight is 20.8 kg for the ZELCAN, 25.1 pounds for the 8850E and 28 pounds for the MD-50E, so all three are portable but none is light.
Bits, coolant and extras
The ZELCAN is the only drill here that includes bits: 6 drill bits in the box, plus a 16.9 fl. oz. coolant tank. The 8850E brings a Weldon shank and depth scales, and the MD-50E brings an 8.66 inch stroke with a clear scale and a 15A overload fuse. The drill press vise guide covers workholding for the bench. If you cut a lot of holes, the bits and the coolant tank save a second order.
Before You Strike an Arc
- All three drills run on 110 volts, corded electric, so check the outlet and the breaker before you plug in.
- The ZELCAN ships with 6 drill bits and a coolant tank; fill the tank before the first hole.
- Check the magnet base and the no-shake strap on arrival, and confirm the drill holds on a scrap plate before you cut.
- Match the cutter shank to the drill: the 8850E uses a Weldon shank.
FAQ for welders
How to set drill press speed?
Match the speed to the metal and the cutter. The 8850E gives 10 speeds from 0 to 800 rpm, the MD-50E gives a 10-level dial from 0 to 750 rpm, and the ZELCAN gives a stepless knob at 650 rpm. Start slow on hard steel and raise the speed only if the cut stays clean.
What do you use a drill press for?
Boring holes in steel plate, beams and pipe where the work cannot move to a bench drill. The listings name ship building, bridge and rail, wind energy, equipment installation and industrial steelwork. A mag drill holds itself to the metal, so the hole goes where the work sits.
How strong is the magnet on a magnetic drill press?
It varies a lot. The ZELCAN states 3125 lbf, the VEVOR 8850E states 2810 lbf, and the VEVOR MD-50E states 1000 N. Check the mag force before you buy, and match it to the thickness and the position of the work.
Do magnetic drill presses work on vertical surfaces?
The 8850E states it stays in place on vertical or sloped metal surfaces. The MD-50E supports upright, side and overhead drilling with its no-shake strap. Always check the hold on a scrap piece before you drill overhead.
Can a magnetic drill press tap threads?
The VEVOR MD-50E combines annular drilling, twist drilling and tapping in one tool. The other two drills state drilling only, with no tapping function listed. If you need tapped holes, pick the drill that lists tapping.
Related: best drill press, annular cutter for magnetic drill, magnetic drill vs benchtop drill press, and the metal fab tools hub.
Scoring, line by line
Each drill is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of these drills states an electrical safety listing, so every drill here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ZELCAN Mag Drill | 9.5 | 32 | 21 | 21 | 0 | 0 |
| VEVOR 8850E | 9.5 | 30 | 21 | 20 | 0 | 0 |
| VEVOR MD-50E | 9.4 | 28 | 20 | 20 | 0 | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.




