Best Drill Press (2026): 4 Top Presses Compared
Four drill presses for home shops, compared by swing, motor, speeds, table tilt and warranty, with the sizing checks to run first.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJet JWDP-109.6/10View on Amazon - 2
Most PowerfulVEVOR 12 In Press9.5/10View on Amazon - 3
Best ValueWEN DP10509.5/10View on Amazon - 4
Best Portable GuideMilescraft Drill Mate9.3/10View on Amazon
A bracket with holes that must line up, a plate that needs a straight bore, a repair where the drill must not wander: that is bench work for a drill press, not a hand drill. The best drill press for a home shop holds the bit square, sets the depth and repeats the hole, and this roundup compares the presses below by swing, motor, speeds, table tilt and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Jet JWDP-10: 10 in press, 5 speeds, 630 to 3300 RPM, tilting table, 5 year warranty. Check price on Amazon
- Most Powerful VEVOR 12 In Press: 12 in swing, 1 HP motor, variable speed, 530 to 3140 RPM, X-laser and LED light. Check price on Amazon
- Best Value WEN DP1050: 10 in press, 5 speeds, 2 in spindle travel, laser guide, LED light, cast iron. Check price on Amazon
- Best Portable Guide Milescraft Drill Mate: Portable drill guide, 1/2 in chuck, angles 0 to 60 degrees, V-groove, depth stop. Check price on Amazon
The machines
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | JWDP-10 JET 10" DRILL PRESS (JT1-3162) | 9.6/10 | Buy on Amazon |
| 2 | VEVOR 12-Inch Benchtop Drill Press, 6.2 Amp | 9.5/10 | Buy on Amazon |
| 3 | WEN 10-Inch Benchtop Drill Press | 9.5/10 | Buy on Amazon |
| 4 | Milescraft 1348 Drill Mate PRO | 9.3/10 | Buy on Amazon |

JWDP-10 JET 10" DRILL PRESS (JT1-3162)
A 10 in benchtop drill press with a 1/3 HP motor, 5 speeds from 630 to 3300 RPM, a table that tilts plus or minus 45 degrees and a 5 year warranty.
Pros
- 5 year warranty, the longest here
- 5 speeds from 630 to 3300 RPM
- Table tilts 45 degrees either way
- Weighs 48.5 lb, easy to move around the shop
Cons
- 1/3 HP, the smallest motor here
- No laser or work light stated
- No spindle travel stated

VEVOR 12-Inch Benchtop Drill Press, 6.2 Amp
A 12 in benchtop drill press with a 1 HP motor, variable speed from 530 to 3140 RPM, a tilting worktable, an X-laser and an LED work light.
Pros
- 12 in swing, the largest here
- 1 HP motor with variable speed
- X-laser guide and LED work light
- Worktable tilts 45 degrees left or right
Cons
- No warranty term stated
- Weighs 84.3 lb, the heaviest here
- No chuck size stated
- No spindle travel stated

WEN 10-Inch Benchtop Drill Press
A 10 in benchtop drill press with a 6.2A induction motor, 5 speeds, a 2 in spindle travel, a laser guide and an LED work light.
Pros
- 5 speeds from 630 to 3300 RPM
- 2 in spindle travel stated
- Laser guide and LED work light
- Cast iron construction
Cons
- No weight stated
- No table tilt angle stated
- No motor HP stated
- No depth stop range stated

Milescraft 1348 Drill Mate PRO
A portable drill press guide with a 1/2 in keyed chuck, angle settings from 0 to 60 degrees, a V-groove channel and an independent depth stop.
Pros
- Angles from 0 to 60 degrees
- V-groove centers round stock
- Independent depth stop with its own guide bar
- All metal construction with brass bushings
Cons
- A guide attachment, not a standalone press
- Needs your own drill, none included
- No weight stated
- No warranty term stated
Other welders and gear to compare
NovelLife Precision Mini Drill Press Benchtop Driller MachineCheck price on Amazon
8-Inch Benchtop Drill PressCheck price on Amazon
VEVOR 10 Inch Benchtop Drill Press 3.2 Amp Tabletop BenchCheck price on Amazon
HFSCheck price on Amazon
Wilton Cross-Slide Drill Press ViseCheck price on Amazon
Wilton Low-Profile Drill Press ViseCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Type | Swing | Motor | Speeds | Table | Warranty |
|---|---|---|---|---|---|---|---|
| Jet JWDP-10 | 9.6/10 | Benchtop press | 10 in | 1/3 HP, 120V | 5, 630 to 3300 RPM | Tilts plus or minus 45 degrees | 5 year |
| VEVOR 12 In Press | 9.5/10 | Benchtop press | 12 in | 1 HP, 6.2 Amp | Variable, 530 to 3140 RPM | Tilts 0 to 45 degrees | Not stated |
| WEN DP1050 | 9.5/10 | Benchtop press | 10 in | 6.2A induction | 5, 630 to 3300 RPM | Beveling, angle not stated | Two-year |
| Milescraft Drill Mate | 9.3/10 | Portable drill guide | Not stated | Uses your drill | Not stated | Angles 0 to 60 degrees | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (3 November 2026).
What the listings tell you
We read 4 listings. Three are benchtop presses and one is a portable drill guide. Two state a 10 in swing and one a 12 in swing. One states a 5 year warranty, one states a two-year warranty, and two state no warranty term. Two state a laser guide, and two state a table tilt angle.
Buying guide: the best drill press for your shop
Swing size
Swing sets how wide a piece you can drill to the center. The Jet and WEN list a 10 in swing, and the VEVOR lists a 12 in swing. Pick the swing that fits the widest piece you drill, not the press that fits the bench.
Motor and speeds
Match the motor and the speed range to the material. The VEVOR lists a 1 HP motor with variable speed from 530 to 3140 RPM, the Jet lists a 1/3 HP motor with 5 speeds from 630 to 3300 RPM, and the WEN lists a 6.2A motor with 5 speeds at 630, 1100, 1800, 2450 or 3300 RPM. Slower speeds suit metal, faster speeds suit wood, so check the range before you buy.
Table tilt and travel
A tilting table drills angled holes without shimming the work. The Jet table tilts 45 degrees either way, and the VEVOR table tilts 0 to 45 degrees left or right. Spindle travel sets how deep one plunge goes: the WEN lists a 2 in travel, and the other presses state no travel.
Laser and work light
A laser marks the spot before the bit touches the work. The VEVOR lists an X-laser guide with an LED work light, and the WEN lists a class IIIA 2.5mW laser with an LED work light. The Jet lists neither, so check the listing if a guide matters to you.
Weight and warranty
Weight tells you how steady the press sits and how hard it is to move. The VEVOR weighs 84.3 lb and the Jet 48.5 lb, while the WEN and Milescraft state no weight. The Jet lists a 5 year warranty, the WEN lists a two-year warranty, and the other two state no warranty term.
Before You Strike an Arc
- Check the power: the Jet runs on 120V, so keep a standard outlet by the bench.
- Check the chuck: the Jet lists a JT33 chuck from 1/16 to 1/2 in, and the WEN lists a 1/2 in chuck, so match your bits to the chuck before the first hole.
- Check the table: the VEVOR table tilts 0 to 45 degrees, so set the angle and lock it before you drill.
- Check the guide: the Milescraft guide needs your own drill, so fit the drill in the chuck and tighten both the knob and the handle before use.
FAQ for welders
What does the size of a drill press mean?
Size usually means swing, the widest piece the press can drill to the center. The Jet and WEN list a 10 in swing, and the VEVOR lists a 12 in swing. A larger swing fits wider work, while a smaller press fits a crowded bench.
How do I size a drill press for my shop?
Start with the widest piece you drill and the tallest work you clamp under the chuck. The presses here list a 10 in or 12 in swing, and the WEN measures 28.75 in tall with an 8.2 by 13.5 in base. Check the bench space and the ceiling above the press before you buy.
How do you use a drill press for metal?
Clamp the work, set a slow speed and let the bit cut without forcing it. The Jet runs 630 to 3300 RPM and the VEVOR 530 to 3140 RPM, so both cover slow speeds for metal. Use cutting fluid where the material calls for it, and clear chips before they bind the bit.
How do I clean a rusty drill press?
Start with the manual, since the maker knows the coatings on the table and column. Wipe the table and column clean, oil the bare metal lightly, and check the chuck and depth stop move freely. Keep the press dry between jobs so rust does not come back.
What is the difference between a drill press and a drill guide?
A drill press is a standalone machine with its own motor, table and column. A drill guide, like the Milescraft here, is an attachment that turns your own hand drill into a guided drill with angle settings from 0 to 60 degrees. Pick the guide when bench space is tight, and the press when you drill often.
Related: see our best drill press vise, our bench vise vs drill press vise, our drill press vs hand drill and our metal fab tools hub.
Scoring, line by line
Each drill press is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None states a UL, ETL or CSA listing, so all score zero on safety, and the ranking comes from the other four criteria.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Jet JWDP-10 | 9.6 | 30 | 21 | 20 | 0 | 4 |
| VEVOR 12 In Press | 9.5 | 32 | 21 | 21 | 0 | 0 |
| WEN DP1050 | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Milescraft Drill Mate | 9.3 | 23 | 19 | 18 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




