Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Drill Press Types: Benchtop, Floor and Mini (2026)

Benchtop, floor and mini drill presses compared by swing, speed, table tilt and chuck capacity, with figures from the listings in this guide.

Drill Press Types: Benchtop, Floor and Mini (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BUCKTOOL 10-Inch Drill Press 6.2 Amp 3/4 HP Bench Drill PressBUCKTOOL 10-Inch Drill Press 6.2 Amp 3/4 HP Bench Drill Press9.7/10View on Amazon
  2. 2SKIL 6.2 Amp 10 In. 5-Speed Benchtop Drill Press with LaserSKIL 6.2 Amp 10 In. 5-Speed Benchtop Drill Press with Laser9.6/10View on Amazon
  3. 3Wilton Low-Profile Drill Press ViseWilton Low-Profile Drill Press Vise9.6/10View on Amazon

A hand drill wanders when the bit bites, and a drill press holds the line, so drill press types are what to sort out before choosing a machine for the bench. Drill press types come down to where the machine sits and how much room the work needs: benchtop, floor and mini. This guide explains each type, shows how to read the size figures on a listing, and names the figures the listings in this guide actually state.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Drill press types in one paragraph

A benchtop drill press bolts to a bench and suits a home shop, a floor drill press stands on the shop floor and suits taller work, and a mini drill press is a compact bench machine for small work. The listings in this guide are benchtop and mini machines. The benchtop listings state swings of 8 in, 10 in and 12 in, speeds from 530 to 3200 RPM, tables that tilt 0 to 45 degrees, and chuck capacities from 1/16 in to 1/2 in. The mini listing states 6 speeds from 0 to 2800 RPM and a chuck of 1.5 to 13 mm. No floor press figure is stated in the listings here, so the floor type below is explained without figures.

Side by side

Benchtop Floor Mini
Where it sits On a bench On the shop floor On a bench or small table
Swing 8 in, 10 in and 12 in in the listings No figure stated in the listings here No swing figure stated for the mini listing
Speeds 530 to 3200 RPM in the listings No figure stated in the listings here 6 speeds, 0 to 2800 RPM
Table tilt 0 to 45 degrees on the listings here No figure stated in the listings here No tilt figure stated for the mini listing
Chuck capacity 1/16 in to 1/2 in on the listings here No figure stated in the listings here 1.5 to 13 mm
Motor 2.5 Amp to 5 Amp in the listings No figure stated in the listings here 710W
Suits Wood and metal in a home shop Taller work that needs height Small workshops, garages and home DIY

Swing, speed and chuck figures below come from the listings in this guide, and each figure is tied to the listing that states it. Where a listing states no figure for a type, the table says so rather than borrowing a figure from another listing.

When a benchtop press is the better choice

  • Bench work in a home shop. A benchtop press bolts to the bench and stays put for wood and metal. The VEVOR 10-inch (on Amazon) listing states a 3.2 Amp motor, 5 speeds from 650 to 3100 RPM, and a 0 to 45 degree tilting worktable.
  • Angled holes. A tilting table handles angled drilling without re-clamping the work at an angle. The KYBOLT 8-inch (on Amazon) listing states a table that tilts from 0 to 45, and the VEVOR 12-inch listing states a tilt table from 0 to 45 degrees.
  • Deeper holes and larger work. Spindle travel sets how deep one pass goes, and swing sets how wide the work can be. The KYBOLT 8-inch listing states 50 mm spindle travel with an 8-inch swing, and the VEVOR 12-inch (on Amazon) listing states a 12 in swing with a 5 Amp, 120V motor.
  • Laser guides and lights. A laser guide marks the drilling spot, and a work light shows the layout lines. The VEVOR 10-inch (on Amazon) 1016BVS listing states an X-laser guide with a 530 to 3140 RPM variable speed range, and the SierraSquad 8-inch (on Amazon) listing states a Class II laser of max 1mW with a 1W LED work light.

See our best drill press guide for benchtop picks, and the benchtop vs floor standing drill press comparison for the bench-or-floor decision.

When a floor press is the better choice

  • Taller work. A floor press stands on the shop floor, so the table can drop low for tall pieces that would not fit under a benchtop head.
  • Longer columns. The column on a floor press gives more room between the table and the chuck for tall work and long stock.
  • A dedicated station. A floor press stays in one place in the shop, so the bench stays free for other work.
  • Heavier work. A floor press suits work that is too tall or too heavy to lift onto a bench.

No floor press figure is stated in the listings in this guide, so check the swing, speed and chuck figures on the floor listing itself before choosing one. The drill press vs hand drill guide covers when a press beats a hand drill at all.

How to read the size figures

Swing is the width of the largest disc the press can drill to the center of, and the listings here state swings of 8 in, 10 in and 12 in. Chuck capacity is the largest bit shank the chuck holds: the QD-KYOHO 8-inch listing states a chuck capacity of 1/16 in to 1/2 in, the SierraSquad 8-inch listing states a chuck capacity of 1/2 in, and the BACHIN mini listing states a chuck of 1.5 to 13 mm. Speed is stated as a range or as set speeds: the QD-KYOHO listing states 5 preset speeds of 620, 1100, 1720, 2340 and 3100 RPM, the VEVOR 10-inch listing states 5 speeds of 650, 1050, 1800, 2350 and 3100 RPM, and the VEVOR 12-inch listing states a variable speed from 580 to 3200 RPM. Table tilt is stated as 0 to 45 degrees on the benchtop listings here. Weight in the benchtop listings runs from 27.0 lb to 76.0 lb, with the SierraSquad 8-inch listing at 27.0 lb and the VEVOR 12-inch listing at 76.0 lb. The drill press speed chart shows speed by bit size.

Mini presses and small shops

A mini drill press is a compact bench machine for small work in a small shop. The BACHIN mini listing states a 710W motor, 6 speeds from 0 to 2800 RPM, and a chuck of 1.5 to 13 mm, for wood, metal, plastic and other materials. The QD-KYOHO 8-inch benchtop listing includes a precision vise with 2-1/2 in wide jaws, a 2-1/4 in opening and a 5/8 in throat depth, which shows how a bench press can hold small work without a separate vise. A mini press suits a garage or a small workshop where bench space is short, and the BACHIN listing describes its design as compact and portable. See the best drill press for home garage guide for small-shop picks.

Drill press safety. Clamp the work to the table before drilling, keep guards in place, wear eye protection, and keep gloves away from rotating parts. Check the chuck key is out of the chuck before switching the press on, and clear chips with a brush rather than by hand. See the drill press safety guide and our Safety Disclaimer.

For more options, see our metal fab tools guides.

FAQ for welders

What are the main drill press types?

The main types are benchtop, floor and mini. A benchtop press bolts to a bench, a floor press stands on the shop floor, and a mini press is a compact bench machine for small work.

What does swing mean on a drill press?

Swing is the width of the largest disc the press can drill to the center of. The listings in this guide state swings of 8 in, 10 in and 12 in on benchtop presses.

How fast should a drill press run?

Speed depends on the material and the bit size, and the listings here state wide ranges: 530 to 3140 RPM on the VEVOR 10-inch 1016BVS listing, 580 to 3200 RPM on the VEVOR 12-inch listing, and 620 to 3100 RPM on the SierraSquad 8-inch listing. Use the speed chart for the bit size in front of you.

Can a benchtop drill press drill angled holes?

Yes, where the table tilts. The KYBOLT 8-inch listing states a table that tilts from 0 to 45, and the VEVOR 10-inch and 12-inch listings state tilting worktables from 0 to 45 degrees.

Which drill press listing here states a warranty?

The QD-KYOHO 8-inch listing states a 1-year warranty with technical support and after-sales service. No other listing in this guide states a warranty term.

Related: best drill press for metalworking, magnetic drill vs benchtop drill press, drill press with laser guide, and the drill presses and grinders hub.

More buying guides

Metal Fab Tools ·

Drill Press Safety: Tips for Safe Drilling

Drill press safety comes down to clamping the work, keeping hands clear of the chuck, and wearing eye protection, with a vise that holds…

Metal Fab Tools ·

Drill Press Speed Chart by Bit Size

A drill press speed chart matches bit size and material to spindle speed, and this guide shows how to read it and which bits…