Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Benchtop vs Floor Standing Drill Press: Which to Buy?

Benchtop vs floor standing drill press: benchtop presses bolt to a bench for most shop drilling; floor models handle tall work. Compare swing and speed.

Benchtop vs Floor Standing Drill Press: Which to Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BUCKTOOL 10-Inch Drill Press 6.2 Amp 3/4 HP Bench Drill PressBUCKTOOL 10-Inch Drill Press 6.2 Amp 3/4 HP Bench Drill Press9.7/10View on Amazon
  2. 2SKIL 6.2 Amp 10 In. 5-Speed Benchtop Drill Press with LaserSKIL 6.2 Amp 10 In. 5-Speed Benchtop Drill Press with Laser9.6/10View on Amazon
  3. 3Wilton Low-Profile Drill Press ViseWilton Low-Profile Drill Press Vise9.6/10View on Amazon
  4. 4JET 12" Benchtop Drill PressJET 12" Benchtop Drill PressView on Amazon
  5. 5VEVOR 12-Inch Benchtop Drill PressVEVOR 12-Inch Benchtop Drill PressView on Amazon
  6. 6VEVOR 12 in Benchtop Drill PressVEVOR 12 in Benchtop Drill PressView on Amazon
  7. 7VEVOR 10-Inch Benchtop Drill PressVEVOR 10-Inch Benchtop Drill PressView on Amazon
  8. 8WEN 12-Inch Benchtop Drill PressWEN 12-Inch Benchtop Drill PressView on Amazon
  9. 9VEVOR Benchtop Drill PressVEVOR Benchtop Drill PressView on Amazon

Benchtop vs floor standing drill press, the direct answer: a benchtop press bolts to a bench and suits most home-shop drilling, while a floor standing press stands on the shop floor and handles taller work with more power and swing. Both drill straight holes; the choice is workspace and workpiece size. This guide explains the differences step by step, with figures from the drill press listings WeldGearLab collected.

Other welders and gear to compare

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Affiliate disclosure.

Benchtop vs floor standing drill press: the short version

The listings show the 2 classes clearly:

  • Benchtop presses mount on a bench or stand. 9 of the 10 listings are benchtop: 10 to 15 inch swing, 28.7 to 39.5 inches tall, 41.9 to 86.5 pounds, motors from 3.2A to 1 HP. The JET JWDP-12 runs 530 to 3100 RPM variable with a 5-year warranty; the WEN DP1263V and DP1050 carry 2-year warranties.
  • Floor standing presses stand on the floor. The JET J-2500 is 63 inches tall at 157 pounds, with a 15-inch swing, 16 speeds from 200 to 3630 RPM, a 3/4 HP 115/230V motor and a 2-year warranty. It drills what a benchtop cannot reach.

What the listings state

The benchtop listings cluster tightly. Speeds run 530 to 3140 RPM on the variable-speed models (JET JWDP-12, VEVOR 12-inch 1 HP, VEVOR 10-inch 0.8 HP) and 5 to 16 stepped speeds on the belt models (VEVOR 10-inch 3.2A at 650 to 3100 RPM, WEN DP1050 at 630 to 3300 RPM, JET J-2530 at 200 to 3630 RPM). Chuck capacities run 1/2 to 5/8 inch. Spindle travel runs 2 inches (Bucktool, WEN DP1050) to 3-1/8 inches (JET JWDP-12, WEN DP1263V, JET J-2530). Tables tilt 45 degrees on most models, and lasers and LED work lights are common. Weights run 41.9 pounds (VEVOR 10-inch 3.2A) to 86.5 pounds (Bucktool).

When a benchtop press is the right call

Buy a benchtop press if the work fits on a bench. The 12-inch class dominates the listings: 12-inch swing, 5/8-inch chucks, 2 to 3-1/8 inch spindle travel, and tables that tilt 45 degrees for angled holes. The JET JWDP-12 adds variable speed without belt changes and a 5-year warranty; the Bucktool adds a 360-degree rotating table. A benchtop press needs a sturdy bench and must be bolted down: the JET listing says so explicitly. The trade-off is reach: 17 inches max spindle-to-table on the JET JWDP-12, and no capacity for tall workpieces.

When a floor standing press is the right call

Buy a floor standing press if the work is tall or the shop drills production. The JET J-2500 stands 63 inches tall at 157 pounds with a 15-inch swing and 16 speeds from 200 to 3630 RPM, a 3-1/8 inch quill travel and a 3/4 HP motor wired 115/230V. The floor model takes workpieces a benchtop cannot swallow and stays put under heavy drilling. The trade-off is floor space and weight: 157 pounds needs a permanent spot.

Side-by-side comparison

Topic Benchtop press Floor standing press From the listings
Swing 10 to 15 inches 15 inches VEVOR 10in, JET J-2500
Height 28.7 to 39.5 inches 63 inches VEVOR 3.2A, JET J-2500
Weight 41.9 to 86.5 pounds 157 pounds VEVOR 3.2A, Bucktool, JET
Speeds 530 to 3140 RPM variable or 5-16 step 200 to 3630 RPM, 16 speed JET JWDP-12, J-2500
Mounting Bolted to bench Stands on floor JET JWDP-12

Buying advice: sizing the press

Swing and travel first

Swing is the diameter of the largest disc the press can drill to the center of: 10 inches on the VEVOR and WEN 10-inch models, 12 inches on most listings, 15 inches on the JET J-2500 and J-2530. Spindle travel is how deep one stroke goes: 2 inches on the Bucktool and WEN DP1050, 3-1/8 inches on the JET models and WEN DP1263V. Match both to the work: deep holes want the 3-1/8 inch travel, and wide panels want the 15-inch swing.

Speed control for metal

Metal wants slow speeds, wood wants fast. The variable-speed models (JET JWDP-12 at 530 to 3100 RPM, VEVOR models at 530 to 3140 RPM) change speed with a lever or dial; the belt models (WEN DP1050, VEVOR 10-inch 3.2A, JET 16-speeds at 200 to 3630 RPM) change by moving belts. For metal fabrication, the low end of the range matters most: 200 RPM on the JET 16-speeds beats 650 RPM on the VEVOR 5-speed for large bits in steel.

Chuck capacity and what it drills in metal

Chuck capacity sets the largest bit shank the press accepts: 1/2 inch on the WEN DP1050 and the VEVOR 10-inch 3.2A, 5/8 inch on the JET JWDP-12, WEN DP1263V and Bucktool, whose keyed chuck opens from 1/32 to 5/8 inch. Drilling capacity in metal runs 0.5 inch on the VEVOR 10-inch models and the JET JWDP-12 to 0.63 inch on the Bucktool. The JET JWDP-12 adds an MT2 spindle taper and a linear depth scale with depth stop for repeatable hole depths.

Tables, lasers and lights

Table size and movement decide how workpieces get positioned. The JET JWDP-12 table is 9-1/2 by 9-1/2 inches and tilts 45 degrees left and right; the WEN DP1050 table is 7.5 by 6.5 inches, height-adjustable and beveling; the Bucktool table rotates a full 360 degrees and bevels 45 degrees. For layout, the Bucktool, WEN and VEVOR listings include a Class IIIA 2.5mW laser, the JET JWDP-12 uses two XACTA lasers for a crosshair, and LED work lights are common across the listings.

Power draw and circuits

Every listing here runs on corded 115 to 120 volt power. Draw ranges from 3.2 amps on the VEVOR 10-inch 3.2A to 6.2 amps on the VEVOR 12-inch 1 HP and the WEN models; the JET JWDP-12 draws 5 amps and its listing recommends a dedicated 15-amp circuit. The JET J-2500 floor model draws 9 amps on its 3/4 HP motor and can be wired 115 or 230 volts. Check the circuit before buying, not after.

Safety switches and mounting hardware

Look at the switchgear, not just the speeds. The Bucktool listing includes an emergency stop switch and a no-voltage release switch; the JET JWDP-12 start switch has a removable safety key; the WEN DP1050 has a lockout power switch; the JET floor and 15-inch benchtop models use a telescoping safety spindle guard. For mounting, the VEVOR 5-amp 12-inch listing includes 4 M10 by 25 hex head bolts, while the JET JWDP-12 listing notes bench-mounting bolts are not included, so plan the hardware with the bench.

FAQ for welders

Is a benchtop drill press enough for metal?

Yes for most home-shop metal work: the listings show 5/8-inch chucks and 580 RPM low speeds suited to metal. For large bits in steel, the slower 200 RPM low end of the JET 16-speed models is better.

How much space does a floor drill press need?

The JET J-2500 is 31 by 13 inches at the base and 63 inches tall at 157 pounds. Give it a permanent floor spot with room to swing long stock.

Do I need to bolt down a benchtop press?

Yes. The JET JWDP-12 listing says it must be bolted to a bench or stand, and the VEVOR listings include mounting bolts.

What warranty do these carry?

The JET JWDP-12 lists a 5-year warranty; the WEN models and JET J-2500/J-2530 list 2-year warranties.

More welding guides

For more shop tools, browse our metal fab tools guides.

More buying guides