Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Magnetic Drill for Fabrication Shop (2026)

Magnetic drills for fabrication shops compared by motor, boring diameter, speed, magnetic force and warranty, from what each listing states.

Best Magnetic Drill for Fabrication Shop (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Hougen HMD904Best OverallHougen HMD9049.4/10View on Amazon
  2. 2ZELCAN 1550W Mag DrillMost PowerZELCAN 1550W Mag Drill9.5/10View on Amazon
  3. 3VEVOR 1450W Mag DrillMost VersatileVEVOR 1450W Mag Drill9.5/10View on Amazon
  4. 4VEVOR 1300W Mag DrillCoolant KitVEVOR 1300W Mag Drill9.4/10View on Amazon

A beam needs holes for bolts, a plate needs a clean bore for a pin, and the drill press cannot reach the work where it sits. A magnetic drill clamps to the steel itself and bores the hole on the spot. This guide finds the best magnetic drill for fabrication shop work, comparing the drills on motor, boring diameter, speed, magnetic force and warranty, using only what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Hougen HMD904: Lift Detector Safety System, LED pilot light and a Two year warranty Check price on Amazon
  • Most Power ZELCAN 1550W Mag Drill: 1550W motor with a 2-inch boring diameter and 2-inch depth, stepless 0-580 rpm Check price on Amazon
  • Most Versatile VEVOR 1450W Mag Drill: 1450W with 0-800 RPM, 10-speed gears and 2 coring bits included Check price on Amazon
  • Coolant Kit VEVOR 1300W Mag Drill: Coolant tank and stand, coolant tube and rope included, with 2922 lbf of force Check price on Amazon

The machines

Mag Drill Press, 1550W Portable Magnetic Drill

Mag Drill Press, 1550W Portable Magnetic Drill

ZELCAN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1550W drill with a 2-inch boring diameter, a 2-inch depth, stepless 0-580 rpm with reverse and 2922 lbf of magnetic force.

Pros

  • 1550W copper motor, the strongest motor here
  • 2-inch boring diameter and 2-inch depth
  • Stepless 0-580 rpm with forward and reverse
  • 8.5 fl. oz. coolant tank included

Cons

  • No warranty term is stated
  • No coring bits are included
  • No minimum steel thickness is stated
  • Reversible control adds a setting to check before drilling
VEVOR Magnetic Drill, 1450W Motor 1.6 in Boring

VEVOR Magnetic Drill, 1450W Motor 1.6 in Boring

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1450W drill with a 1.6-inch boring diameter, 0-800 RPM, 10-speed gears, 2810 lbf of magnetic force and 2 coring bits included.

Pros

  • 1450W copper motor with 0-800 RPM
  • 10-speed gears for varied drilling diameters
  • 2 coring bits included
  • Overload protection and a cooling system stated

Cons

  • No warranty term is stated
  • Not suitable for stainless steel or cast iron
  • Needs a steel plate of 0.39 in or more
Hougen HMD904 115-Volt Magnetic Drill

Hougen HMD904 115-Volt Magnetic Drill

Hougen9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 115-volt fabrication drill with a 1-1/2-inch by 2-inch capacity, 450 RPM, a Lift Detector Safety System, an LED pilot light and a Two year warranty.

Pros

  • Lift Detector Safety System stated
  • LED pilot light for low light conditions
  • Two year warranty stated
  • Slot drive arbor for quicker accessory changes

Cons

  • No motor watts are stated
  • No magnetic force figure is stated
  • 34.9 pounds, the heaviest drill here
VEVOR Mag Drill Press, 1300W 1.57" Boring

VEVOR Mag Drill Press, 1300W 1.57" Boring

VEVOR9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1300W drill with a 1.57-inch boring diameter, 810 RPM, 2922 lbf of magnetic force and a coolant tank, tube and rope included.

Pros

  • 2922 lbf of magnetic force
  • Coolant tank and stand with a coolant tube included
  • 810 RPM with a 1300W copper motor
  • Rope, 3 hand cranks and 3 hex wrenches included

Cons

  • No warranty term is stated
  • No coring bits are included
  • Title writes 810 PRM where the bullets write 810 RPM
  • Only a single speed is stated, 810 RPM

Other welders and gear to compare

Spec sheet comparison

Drill Gear Score Motor Boring diameter Speed Mag force Weight Warranty
Hougen HMD904 9.4/10 Not stated 1-1/2 in 450 RPM Not stated 34.9 pounds Two year warranty
ZELCAN 1550W Mag Drill 9.5/10 1550W 2 in 0-580 RPM 2922 lbf 23.8 pounds Not stated
VEVOR 1450W Mag Drill 9.5/10 1450W 1.6 in 0-800 RPM 2810 lbf 26.5 pounds Not stated
VEVOR 1300W Mag Drill 9.4/10 1300W 1.57 in 810 RPM 2922 lbf 24.3 pounds Not stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 October 2026. Magnetic force is the figure each listing states in lbf.

Buying guide: best magnetic drill for fabrication shop

Motor and boring diameter

The ZELCAN states a 1550W copper motor with a 2-inch boring diameter and a 2-inch depth. The VEVOR 1450W states a 1450W copper motor with a 1.6-inch boring diameter and a 2-inch coring depth. The VEVOR 1300W states a 1300W copper motor with a 1.57-inch boring diameter and a 50mm coring depth. The Hougen states no motor watts; its listing gives a 1-1/2-inch by 2-inch capacity with a hole capacity of 7/16-inch to 1-3/8-inch and a max depth of cut of 1 inch.

Speed control

The VEVOR 1450W states 0-800 RPM with adjustable 10-speed gears. The ZELCAN states stepless speed control from 0 to 580 rpm with forward and reverse drilling. The VEVOR 1300W states 810 RPM. The Hougen states 450 RPM with 2 speeds. A stepless control suits a shop that drills varied diameters, and a fixed speed suits repeated holes of the same size.

Magnetic force and holding

The VEVOR 1300W and the ZELCAN state 2922 lbf of magnetic force, and the VEVOR 1450W states 2810 lbf. The Hougen states no magnetic force figure; its listing names a Lift Detector Safety System instead. The VEVOR 1450W listing states a steel plate thickness of 0.39 in or more for best use, and it is not suitable for stainless steel or cast iron. Use a safety rope for inverted and horizontal drilling, as the VEVOR 1450W listing states.

Cooling and bits

The ZELCAN includes an 8.5 fl. oz. coolant tank, and the VEVOR 1300W includes a coolant tank and stand with a coolant tube. The VEVOR 1450W includes 2 coring bits, and the ZELCAN includes 2 spare carbon brushes, 2 spare set screws and a 75 mm pilot. The Hougen lists a slot drive arbor for quicker change out of accessories. Coolant keeps the bit cool, and spare brushes keep the drill running when the set wears.

Before You Strike an Arc

  • Power: the VEVOR 1450W and ZELCAN drills state 110 volts, the VEVOR 1300W states 110 and 240 volts, and the Hougen states 115 volts, so check the shop supply before the job.
  • Steel thickness: the VEVOR 1450W listing states a steel plate thickness of 0.39 in or more, and it is not suitable for stainless steel or cast iron.
  • Bits and coolant: the VEVOR 1450W includes 2 coring bits, the VEVOR 1300W includes a coolant tank and stand with a coolant tube, and the ZELCAN includes a coolant tank and a 75 mm pilot.
  • Check on arrival: the Hougen spec table lists 2 dimension sets, and the VEVOR 1450W spec table lists 13741 rpm against the bullets’ 0-800 RPM, so confirm the speed range before drilling.

FAQ for welders

What steel thickness does a magnetic drill need?

The VEVOR 1450W listing states a steel plate thickness of 0.39 in or more, and it warns that the drill is not suitable for stainless steel or cast iron. The other listings state no minimum thickness, so check the listing for the drill before buying.

How big a hole can these drills bore?

The ZELCAN bores up to 2 inches in diameter and 2 inches deep. The VEVOR 1450W bores 1.6 inches with a 2-inch coring depth, and the VEVOR 1300W bores 1.57 inches with a 50mm coring depth. The Hougen gives a 1-1/2-inch by 2-inch capacity with a hole capacity of 7/16-inch to 1-3/8-inch.

Do magnetic drills work upside down?

The VEVOR 1450W listing states that a safety rope is needed for inverted and horizontal drilling, and the ZELCAN listing states that the drill can be positioned horizontally, vertically, or upside down. The ZELCAN includes a safety rope, and the VEVOR 1300W includes a rope.

What is the Lift Detector Safety System on the Hougen?

The Hougen listing names a Lift Detector Safety System with an LED pilot light for low light conditions and greater hole accuracy. The listing gives no further detail on how the system works, so check the Hougen manual for the drill before use.

Do any of these drills state a warranty?

Only the Hougen states one: a Two year warranty in the manufacturer warranty description. The VEVOR and ZELCAN listings state no warranty term.

See the best angle grinder guide. See the best drill press vise guide. See the metal fab tools guides.

Scoring, line by line

The Gear Score weighs performance (motor, boring diameter and speed), build (guide rail, cooling and included bits), value, safety (stated standards listings) and warranty. No listing here states a standards listing, so safety scores zero across the guide, and only the Hougen states a warranty term.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
ZELCAN 1550W Mag Drill 9.5 32 21 21 0 0
VEVOR 1450W Mag Drill 9.5 30 21 21 0 0
Hougen HMD904 9.4 29 21 19 0 0
VEVOR 1300W Mag Drill 9.4 28 20 20 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides