Best Hole Saw for Sheet Metal: 5 Picks
Best hole saw for sheet metal: five saws compared on tooth material, sizes and cutting capacity.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best for stainlessEZARC Carbide Hole Saw 3/4 Inch9.5/10View on Amazon - 2
Best 2 inch carbidedashap TCT Hole Saw Kit 2 Inch9.5/10View on Amazon - 3
Best rangedashap Bi-Metal Hole Saw Kit9.5/10View on Amazon - 4
Best complete kitVIKITON 2 Inch Bi-Metal Hole Saw9.5/10View on Amazon - 5
Best small sizesGEINXURN 4-Piece M42 Hole Saw Kit9.5/10View on Amazon
The best hole saw for sheet metal cuts clean holes without grabbing or dulling halfway through: carbide teeth for stainless, bi-metal for thin mild steel, and a pilot bit that keeps the cut centered. This guide compares five hole saws for sheet metal for home and hobby shops on what each listing states: tooth material, sizes, cutting capacity and what comes in the box.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best for stainless EZARC Carbide Hole Saw 3/4 Inch: Carbide teeth with 10x stated life over bi-metal. Check price on Amazon
- Best 2 inch carbide dashap TCT Hole Saw Kit 2 Inch: TCT carbide with stated stainless and iron capacity. Check price on Amazon
- Best range dashap Bi-Metal Hole Saw Kit: Sizes from 3/4 inch to 3 inches. Check price on Amazon
- Best complete kit VIKITON 2 Inch Bi-Metal Hole Saw: Arbor, pilot bit, spare bit and hex key included. Check price on Amazon
- Best small sizes GEINXURN 4-Piece M42 Hole Saw Kit: M42 bi-metal kit for cable and vent holes. Check price on Amazon
The best hole saw for sheet metal picks

EZARC Carbide Hole Saw Heavy Duty
EZARC carbide hole saw, 3/4 inch (19mm) for stainless steel and sheet metal up to 3/16 in thick.
Pros
- Carbide teeth cut stainless steel, mild steel, iron, copper and brass
- Stated 10x longer cutting life vs standard bi-metal hole saws
- Carbide teeth stated to cut over 500 holes through stainless steel
- All-in-one design: pilot bit, spring and wrench included
Cons
- Single 3/4 inch size only, no range
- Number of teeth reads 500, which looks like holes not teeth
- No hex key or spare listed in the box

2''(51mm) TCT Hole Saw Kit,Tungsten Carbide Hole
dashap 2 inch TCT hole saw kit in tungsten carbide for hard metal and stainless steel.
Pros
- Industrial grade TCT carbide steel for hard metal
- States 3mm stainless steel and 15mm iron plate capacity
- Double round circles for filing removal and cooling
- Hex key and packing box included
Cons
- Single 2 inch size only
- 0.33 kg is heavy for one saw
- Model number reads like a UUID, not a catalog part
- No arbor included in the box

13PCS Bi-Metal Hole Saw Kit with Drill Bits
dashap bi-metal hole saw kit, 13 pieces in total, spanning 3/4 inch to 3 inches, with mandrels and hex keys.
Pros
- Widest size range here: 3/4 inch to 3 inches
- Bi-metal saws in a kit with two hex keys and individual mandrels
- Enlarged elliptical hole for cooling and filing removal
- 20mm cutting depth for routine tasks
Cons
- Not for strong metal, per the listing
- Bi-metal only: no carbide option in the kit
- Kit size is more than a casual user needs
- Individual packaging adds bulk

2 inch Hole Saw for Wood, Metal
VIKITON 2 inch bi-metal hole saw with arbor, pilot bit, replacement bit and hex key.
Pros
- Complete kit: arbor, pilot bit, replacement pilot bit and hex key
- High-speed steel teeth on a flexible steel body
- Lightweight design for less labor during operation
- Advises coolant and reduced feed speed on metals
Cons
- Excludes stainless steel, per the listing
- Number of teeth reads 2, which looks like a catalog error
- Single 2 inch size only
- Item thickness reads 2 inches, which is the saw body not the cut

Geinxurn 4PCS Impact Small Thinwall Hole Saw Kit
GEINXURN 4-piece M42 bi-metal hole saw kit, 7/8 to 1-3/8 inches with arbors and hex key.
Pros
- M42 bi-metal for hardness and rust resistance
- 1/4 inch quick-change hex shank for drills and impact drivers
- Three arbors and a hex key included
- Small sizes suit cable and vent holes
Cons
- Only three small sizes: 7/8, 1-1/8, 1-3/8 inches
- No carbide: M42 bi-metal only
- Recessed light and cable work is the stated niche, not fab
- Small size limits it to special applications
Other welders and gear to compare
EZARC Carbide Hole Saw Heavy DutyCheck price on Amazon
6"Check price on Amazon
3"Check price on Amazon
1"Check price on Amazon
4"Check price on Amazon
Spec sheet comparison
| Hole saw | Tooth material | Sizes | Stated capacity |
|---|---|---|---|
| EZARC 804014 | Tungsten carbide | 3/4 in (19mm) | Up to 3/16 in thick |
| dashap TCT 2 in | TCT carbide steel | 2 in (51mm) | 3mm stainless; 15mm iron |
| dashap kit | Bi-metal | 3/4 in to 3 in | 20mm cutting depth |
| VIKITON 2 in | Bi-metal, HSS teeth | 2 in (51mm) | Thin metals, not stainless |
| GEINXURN 4-piece | M42 bi-metal | 7/8, 1-1/8, 1-3/8 in | Thin metal |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 October 2026.
Buying guide: what matters in a sheet metal hole saw
Tooth material. Carbide wins on hard metals: the EZARC states carbide teeth that cut stainless and last 10x longer than standard bi-metal, and the dashap TCT is industrial grade TCT carbide steel. The VIKITON and GEINXURN are bi-metal with high-speed steel teeth, which suit thin mild steel; the VIKITON listing excludes stainless steel.
Size and depth. The EZARC is a single 3/4 inch (19mm) saw for material up to 3/16 in thick. The dashap kit spans 3/4 inch to 3 inches with a 20mm cutting depth. The dashap TCT is a 2 inch saw for 3mm stainless steel and 15mm iron plate. The GEINXURN kit covers 7/8, 1-1/8 and 1-3/8 inches.
What is included. The VIKITON includes the arbor, a pilot drill bit, a replacement pilot bit and a hex key. The dashap TCT includes a hex key and a packing box. The GEINXURN includes three arbors and a hex key. The dashap kit totals 13 pieces, with saws, individual mandrels and two hex keys in the box.
Cooling and safety. The VIKITON advises water or coolant and reduced feed speed on metals. The dashap kit has an enlarged elliptical hole for cooling and filing removal. All the listings advise protective goggles and gloves.
FAQ for welders
Can a bi-metal hole saw cut stainless steel?
The VIKITON listing excludes stainless steel, while the EZARC carbide and dashap TCT carbide both state stainless cutting. For stainless, pick carbide.
What size hole saw do I need?
Match the saw to the hole: the examples span 3/4 inch (EZARC) to 3 inches (dashap kit), with 2 inch options from VIKITON and dashap TCT.
Do I need coolant when cutting sheet metal?
Yes: the VIKITON listing advises water or coolant with reduced feed speed on metals, and the dashap kit allows water as a coolant.
How thick can these cut?
The EZARC states material up to 3/16 in thick, the dashap kit a 20mm cutting depth, and the dashap TCT 3mm stainless steel and 15mm iron plate.
Arbor included?
The VIKITON includes the arbor, pilot bit, replacement pilot bit and hex key; the GEINXURN includes three arbors; the dashap kit includes individual mandrels.
Scoring, line by line
Each saw is scored on performance, build, value, safety and warranty.




